Other Sound & Hi-Fi

Percussion Gig Bag / Black

Percussion Gig Bag / Black

This High-power Mono level control has a push-on knob with 10mm thread. The Peak current is at 100WMAX, and the Attenuation direction counterclockwise. Technical Specification Impedance 8ohm ±20% Attenuation direction counterclockwise Turning angle 300° ±5° Attenuation 0dB up to ∞dB Channels mono Peak current 100WMAX

Horn tweeter, 8ohm Plastic version, good efficiency and a wide bandwidth, suitable for universal PA applications. Replacement voice coils are available at option (MHD-1255/VC). Technical Specification Impedance (Z) 8ohm Resonant frequency (fs) 2,000Hz Max. frequency range fx-15kHz Rec. crossov. frequ. (fmax.) (12dB/oct.) 3,000Hz Music power 55WMAX Power rating (P) 30WRMS SPL (1W/1m) 103dB Radiation angle (vert./hor.) 45°/90° Voice coil diameter 25mm Magnet diameter 80mm Mounting cutout 240x80mm Mounting depth 187mm Dimensions 269x101mm Weight 1.05kg

High-End Speaker Technology matching the SPH-... series, coated special cone with highly dampening dust cap and extra flat basket (does not have to be recessed!), top linearity, perfect mass-drive ratio with a wide bandwidth, HiFi for highest requirements. Technical Specifications: Impedance (Z) 8ohm Resonant frequency (fs) 85Hz Max. frequency range fx-10,000Hz Rec. crossover freq. (fmax.) 300/5,000Hz Music power 120WMAX (400-5,000Hz) Power rating (P) 50WRMS SPL (1W/1m) 89dB Suspension compl. (Cms) 0.8mm/N Moving mass (Mms) 4.5g Mech. Q factor (Qms) 1.98 Electr. Q factor (Qes) 0.55 Total Q factor (Qts) 0.43 Equivalent volume (Vas) 4 l DC resistance (Re) 6.3ohm Voice coil induct. (Le) 0.3mH …

Variable adapter piece for stand inserts with standard diameter. Black lacquered steel tube version Height can be adjusted in 5 steps (86-134cm), with locking pin Load capacity: 30kg Weight: 1.9kg

PAST-88/SW Wall Support For PA Speaker System Wall Support For PA Speaker Systems A black lacquered finish adds a premium look to the support. The support is movable (approx. 150°) and tiltable (approx. 20°) and can be locked with setscrews. Fixing bolt for accepting e.g. PA speaker systems with stand insert as well as carrier plates and adapter plates. Distance between fixing bolt and mounting plate: 285mm Total length: 310mm Load capacity: 20kg Safety Note To be installed by experts only! Pay attention to precise screw connection! Please use suitable safety ropes!

Professional Speakers from IMG Stage Line Of very high power capability, high efficiency and with drive parameters which allow a reproduction of the complete bass range: these speakers guarantee excellent results as bass-midrange speakers in 2-way or multiway systems as well as subwoofers with the two larger models. Professional PA bass-midrange speaker, 600WMAX, 300WRMS, 8ohm 25cm (10") professional speaker of very high power capability and quite long excursion, diecast basket, water-repellent coated cone, very good workmanship with a facing basket front, wide frequency response of low distortion and high efficiency, the drive system features a drilled pole core and an additional magnet …

Universal speaker, 60WMAX, 4ohm For general and replacement purposes, of quite high power capability, to be used in the bass-midrange, 30WRMS. Technical Specification Impedance 4ohm Music power 60WMAX Power rating 30WRMS Mounting cutout Ø 147mm Mounting depth 79mm Magnet diameter 100mm Dimensions Ø 169mm Weight 1.07kg

A very talented 2-way speaker, thanks to a very clean reproduction of the midrange. Despite a very attractive price, the SP-202E from MONACOR is ideally suited for 2-way applications and promises an excellent sound quality.
Hi-fi bass-midrange speaker, 50 W, 4 Ω
All-round speaker
Foam surround
Replacement speaker for closed speaker systems
Frequency Range: f3 - 6 kHz
Type: PA
Woofer: 8"
Sound Pressure Level - SPL (dB): 93.0
Diameter: 8"
Weight: 1,4 kg
Power: 100 W
Power (Watt): 100.0
Power RMS: 50 W
Made in: China
Power RMS (Watt): 50.0
Impedance: 4 Ohm

Full Range Speaker Dual cone, suitable for all PA applications and other purposes, especially for multiple arrangements in column speakers. Very good sound quality. Technical Specification Impedance (Z) 8Ω Resonant frequency (fs) 100Hz Max. frequency range f3-17,500Hz Music power 10WMAX Power rating (P) 8WRMS SPL (1W/1m) 94dB Magnet weight 79g Type of speaker Mounting cutout 180mm Mounting depth 63mm Dimensions Ø 205mm Weight 370g

Bass speaker, 200WMAX, 8ohm With drilled pole core and great linear excursion for powerful bass reproductions. Technical Specification Impedance (Z) 8ohm Resonant frequency (fs) 33Hz Max. frequency range f3-4,000Hz Music power 200WMAX Power rating (P) 100WRMS SPL (1W/1m) 94dB Suspension compl. (Cms) 0.69mm/N Moving mass (Mms) 33g Mech. Q factor (Qms) 2.33 Electr. Q factor (Qes) 0.38 Total Q factor (Qts) 0.33 Equivalent volume (Vas) 115 l DC resistance (Re) 6.5ohm Force factor (BxL) 10.8Tm Voice coil induct. (Le) 1.2mH Voice coil diameter 50mm Voice coil former aluminium Linear excursion (XMAX) ±3.5mm Eff. cone area (Sd) 346cm2 Magnet weight 1.1kg Weight 3.9kg

Universal bass speaker, 200WMAX, 8ohm Suitable for bass applications, also in power speaker systems. Impedance (Z) 8ohm Resonant frequency (fs) 45Hz Max. frequency range f3-4,000Hz Music power 200WMAX Power rating (P) 100WRMS SPL (1W/1m) 90dB Magnet weight 850g Type of speaker Mounting cutout Ø 280mm Mounting depth 125mm Dimensions Ø 303mm Weight 2.3kg

SPH-165 HiFi bass-midrange speaker, 100WMAX 50W RMS, 8 Ohm Especially strong drive and high power capability, suitable for all universal HiFi applications of high requirements, very well suited for bass-reflex and band pass cabinets up to horn combinations. Technical Specification Impedance (Z) 8 Ohm Resonant frequency (fs)33Hz Max. frequency range f3-5,000Hz Rec. crossover freq. (fmax.)3,500Hz Music power 100WMAX Power rating (P) 50WRMS SPL (1W/1m)89dB Suspension compl. (Cms)1.22mm/N Moving mass (Mms)16g Mech. resistance (Rms)1.6kg/s Mech. Q factor (Qms)2.02 Electr. Q factor (Qes)0.23 Total Q factor (Qts)0.21 Equivalent volume (Vas)36 l DC resistance (Re)6.…

Drilled pole core
Very good frequency response linearity also in the high frequency range
For general applications
60wmax music power

Microphone windshield of black foam. For microphones with Ø 40-50mm Dimensions: Ø 60mm x 70mm Suitable e.g. for DM-2500 and microphones of the same design

Guitar Gig Bag / Black / Foam Padding 20 mm

Pedal bag for Mooer GE 300 multi effects board. The Mooer GE 300 Pedal Bag is designed to protect your GE 300 from the unforgiving environments of night clubs, bars, stadiums, and life on the road. This soft carry case features a main compartment for the GE 300 unit, a front pouch to safely store cables, and a zippered front pocket for picks and other accessories. There are also two backpack-style straps for carrying convenience and a sleeve if you prefer to attach it to another bag or guitar case.
Original Colour by Producer: Black;Black
Made in: China
Colour: Black
UK/EU Power supply included: No
Type: Pedal Bag

Soft Carry Case designed for MOOER GE200 Pedal. Durable and Lightweight Case help your Convenient Travel and Performance.The front pocket for quick storage of pedal cables and power cables.
Made in: China
Colour: Black
Type: Pedal Bag
Material: Nylon
Depth (cm): 7.0
Interior Height (mm): 200.0
Width (cm): 37.0
Interior Width (mm): 360.0
Interior Depth (mm): 50.0
Height (cm): 23.0
Weight: 1,5 kg

Moog SR Series Cases are here to safeguard your Moog Moog Grandmother synthesizer where you need it most and ensure your sound travels far and wide.
Suitable for Brand: Moog
Suitable for: Moog Grandmother
Made in: USA
Waterproof: Yes
Height (mm): 406.4
Number of Keys: 32
Length (mm): 362.0
Colour: Black
Material: Cordura
Width (mm): 139.0

The Moog Matriarch SR Series Case is designed to provide the utmost protection for your Moog Matriarch synthesizer.Impact and water-resistant design to protect your synth on the go.A semi-rigid ABS shell and Ballistic Cordura exterior for maximum durability.Laminated water-resistant zippers for secure closure.Multiple carrying options, including air-mesh padded backpack straps, a single shoulder strap, and webbed handles.Internal foam padding to secure the synth and prevent movement.A front pocket for storing accessories like cables and headphones.This case ensures that your Matriarch synthesizer is safeguarded against impacts, water damage, and the rigors of travel, making it an essential accessory …

Instrument Equipment Bag / 4.2 kg

The Moog Etherwave Theremin SR Case is a durable and protective case designed specifically for the Moog Etherwave Theremin.Generous padding around a semi-rigid ABS shellA rugged Ballistic Cordura outer that resists tears and abrasionsLaminated water-resistant zippersAn adjustable shoulder strap and reinforced handle for comfortable transportA multifunction front pocket for organizationMolded tray for pitch and volume antenna storageInternal dimensions: 45 cm W x 15 cm L x 6.6 cm DExternal dimensions: 50 cm W x 20 cm L x 16 cm DThis case is tailored to provide complete protection, comfort, and convenience for your Etherwave Theremin, ensuring it remains safe during travel and storage.
Type: Bag<…

Drum Gig Bag / Black