Other Sound & Hi-Fi

Black rectangular cast-iron base with tilt angle adjustment, 2-piece adjustable extension tubing with non-marring height-adjustment mechanism. Ideal for drums and studios. Specifications:- Base dimensions: 170 x 135 mm- Height: from 400 to 640 mm- Height adjustment: non-scratching locking screw- Leg construction: rectangular cast-iron base- Material: steel- Rod combination: 2-piece folding design- Special features: anti-vibration felt insert for noise filtration, tilt angle adjustment- Threaded connector: 3/8´´- Weight: 2.09 kg

The K&M 23781 Microphone Fishing Pole is a high-quality boom pole for microphones. Featuring high levels of stability and rigidity at a low weight this is great for location recordings and television sound. The three clamps provide an easy to use locking system which can be extended to 1.6m in length. An internal cable feed through also is featured on this product which eliminates many problems often faced with running cables everywhere. To aid with transporting this to where you are recording a padded bag with a carrying loop is included.

Swivel Arm / Suitable For universal / Black

This exclusive microphone desk arm with 3/8" or 5/8" thread connection in an attractive design and with an innovative table clamp enables the quick and flexible alignment of microphones in studios or multimedia workplaces. Microphones weighing up to 1.5 kg are easily held in any position. With a clamping range of 10 to 51 mm / ø 15 to ø 51 mm, the clamp offers a wide range of mounting options. The sturdy metal frame with high-quality plastic inserts and anti-slip pads ensures secure and powerful clamping. Thanks to the specially shaped clamping surfaces, the clamp can be used on smooth surfaces as well as on round tubes. Optionally, the microphone arm can also be fixed with the …

PA Speaker Stand

Solid and stable wall mount with adjustable boom for monitors and speakers up to 15 kg. The boom can be swiveled on both sides up to 54° and tilted continuously up to -17°. The width is 170 mm and the clamping depth ranges from 150 to 220 mm. Self-adhesive rubber pads protect the surface of the box and prevent vibration noise. User-friendly controls allow quick and convenient adjustments, which also remain fixed. The sturdy metal construction is protected by a durable powder coating.
Material: Steel
Height Adjustable: No
Type: Wall Mount
Made in: Germany
Colour: Black
Panel Surface: 150 x 220 mm
Load Capacity: 15 kg
Variant: M
Net Weight (kg): 2.05…

Solid and stable wall mount with adjustable boom for monitors and speakers up to 15 kg. The boom can be swiveled on both sides up to 54° and tilted continuously up to -17°. The width is 200 mm and the clamping depth ranges from 210 to 340 mm. Self-adhesive rubber pads protect the surface of the box and prevent vibration noise. User-friendly controls allow quick and convenient adjustments, which also remain fixed. The sturdy metal construction is protected by a durable powder coating.
Load Capacity: 15 kg
Variant: L
Colour: Black
Made in: Germany
Panel Surface: 210 x 340 mm
Net Weight (kg): 2.36
Height Adjustable: No
Type: Wall Mount
Material: Steel…

Robust wall mount for holding speakers with flange socket up to 25 kg. The swivel range is continuously adjustable up to 120°. The tilt can be fixed in three steps with 0°, -12.5° and -25°. A patented expanding mandrel ensures a wobble- and vibration-free fit of the speaker. The solid steel construction and durable powder coating ensure long-lasting use.
Material: Steel
Height Adjustable: Yes
Type: Wall Mount
Colour: Black
Net Weight (kg): 2.0
Load Capacity: 25 kg
Made in: Germany

Mount Bracket

Universal wall mount with 3/8" or 5/8" mounting bolt for microphones and antennas. Thanks to the user-friendly ball joint, the mount can be swiveled 360° and tilted 90°. The mounting plate has a diameter of 70 mm and the wall distance is 205 mm.
Made in: Germany
Weight: 0,48 kg
Type: Wall Mount

The K&M 252 Microphone Stand is reliable for the studio musician or live venue. The 252s steel frame is rugged and durable making it able to last a constant touring schedule. The two piece boom arm can reach up to 795mm which is suitable for solo and group vocalists. This models tripod base has a secure stance on uneven stages and keeps the pole upright so that your microphone isnt on an inconvenient angle.

Entry-level, low-priced microphone stand. The practical swivel joint allows the one-piece boom arm to be simultaneously positioned for tilt and length. Thanks to a low weight of only 1.84 kg, it is particularly suitable for the mobile musician. The stand requires little space as its base diameter is only 660 mm. The large foot end caps help to make the stand stable and reduce unpleasant transmission noise.
Made in: Germany
Type: Microphone Stand
Boom Length: 805 mm
Weight: 1,84 kg
Material: Steel
Height Adjustable: Yes
Maximum Height: 1600 mm
Incl. Gig bag/Case: None
Minimum Height: 890 mm

Extra-long boom arm including counterweight. The extendable boom arm with toggle clamping offers an adjustable length from 870 to 1550 mm.
Made in: China

Low-level two-piece telescopic microphone stand with foldable legs that comes with a two-piece boom arm with standard 3/8” threaded connector. It features an easy clutch height adjustment (from 425 to 645 mm) and T-bar locking screw for boom arm clamping. The stand is made of durable steel. Boom arm length: 470-775 mm. Weight: 2.96 kg. Black colour.
Made in: Germany
Weight: 2,2 kg

Microphone stand with extra low design for bass drums or special use. Die-cast base with folding legs. Comes complete with boom arm. Boom arm: one-piece design. Boom arm clamping: T-bar locking screw. Boom arm length: 525 mm. Height: 280 mm. Material: steel. Threaded connector: 3/8''. Weight: 1,9 kg. Finish: Black
Made in: Germany
Weight: 1,8 kg

Steel microphone stand with boom arm (model 21140) that features an extra low design for bass drums or special use, and very short, heavy legs and zinc die-cast base to provide maximum stability. Boom arm with adjustable length from 425 to 725 mm features a two-piece telescopic design, a wing nut and a 3/8” threaded connector. Legs of the stand are foldable for easy transport. Height: 280 mm. Weight: 2.98 kg. Black colour.
Made in: Germany

Microphone Stand

The K&M 25993 compact microphone stand is a compact and space-saving stand for cabs kick drums and cajons. Thanks to the K&M 25993 having a flat and stable stand it can easily slide into hard to reach places where a tripod would be too bulky. To ensure you can correctly position your microphone the K&M compact stand features an adjustable boom arm. To minimise any potential impact sound or unwanted transmission noise the K&M stand has four elastic rubber reet.

This useful and versatile steel microphone table stand ensures stability and functionality. Thanks to the user-friendly height adjustment and the comfortable swivel arm, the microphone can be adjusted quickly. Regardless of using the stand as a table stand for broadcast and conference support or as a floor stand for amplifiers, the flat stand base provides for comfortable and space saving use. Four elastic rubber feet ensure noise filtration. Specifications: - Base dimensions: 200 x 200 mm- Boom arm: one-piece design- Boom arm clamping: wing nut- Boom arm length: 310 mm- Height: from 285 to 400 mm- Height adjustment: clutch- Leg construction: flat steel plate- Material: steel- Rod combination: …

Microphone Stand / Suitable For universal / Black

Microphone Stand

Microphone Stand

The K&M 26145 Microphone Stand is ideal for tall musicians and as an overhead for drum kits. The 26145 stand features a long range pole that extends up to 1700mm. The round cast iron base has stability whilst not taking up excessive floor space. This models locking screw keeps your inclination secure whilst the slim clutch allows you to instantly adjust the height to your exact preference. The 26145s telescopic boom arm has a long reaching ability to suit a variety of applications.

The new star in your show! The avant-garde, one-hand microphone stand is setting new standards in design and function. The elegant combination of triangular-shaped sections and the new design of the slender one-hand adjustment mechanism go harmoniously with standard microphone clips and microphones. The integrated knurled screw is impossible to lose and makes tightening and positioning the microphone clip easy. The stand's simple elegance loses nothing by the addition of König and Meyer's classic swivel arm. The height of the stand can be adjusted soundlessly, simply and easily using the unique one-hand clutch. The stand is significantly lightweight, but nonetheless stable due to the ingenious r…