Other Sound & Hi-Fi Dunlop

Signal switch pedal from MXR. The A/B Box allows you to route your instrument's signal to two separate output amp paths. Use it to switch between amps or run them both at the same time with different effect configurations so you can find your ultimate sound. Use the Thru jack to connect to a tuner, amp or other device that you want to receive a constant signal. The A/B Box comes in a heavy-duty die-cast housing with high quality jacks and switches.
Battery Operation: Yes
Made in: USA
Power Supply: Adapter or Battery
Battery Type: 9V
UK/EU Power supply included: No

The MXR Tap Tempo switch features adjustable tip/ring configuration so you can control the delay time of a wide variety of delay pedal types. This pint-sized footswitch is ruggedly built for a lifetime on the road.
Power Supply: Passive
UK/EU Power supply included: No
Made in: USA
Battery Operation: No

Power supply supplies quiet, noise-free DC power to wide range of pedal types while taking up less space than a candy bar. The Mini Iso-Brick Power Supply has five inputs, and each is fully isolated to eliminate obnoxious, gig-ending ground loop noise. Four of the outputs supply 9 volts of power at 300mA, while a fifth can be set to provide either 9 volts or 18 volts at 800mA depending on your needs. With a generous amount of current on tap and the ability to handle both negative and positive grounds, these outputs will accommodate almost any pedal, analog or digital. And don’t let the five outputs restrict you—if you need to add an extra pedal, the Mini Iso-Brick Power Supply has you covered. It …

The MXR Iso-Brick Pro Power Supply is designed to deliver clean, steady voltages to a diverse range of pedal types, allowing you to confidently power your entire pedalboard without any extra bulk.Power Outputs:Fully Isolated Outputs: Each of the Iso-Brick Pro’s outputs is fully isolated to preserve signal purity and eliminate environmental noise.Fixed Outputs:Two 9V DC outputs at 500mA each.Four 9V DC outputs at 300mA each.Switchable Outputs:Two switchable outputs that can be set to 9V, 12V, or 18V DC at 500mA.Dedicated 9V DC output at 1.5A for high-demand multi-effects units like the Line 6 HX Effects processor and HX Stomp amp/processor.18V DC link output at 2.0A for connecting to a secondary po…