Other Sound & Hi-Fi

Cables Direct RB-10M02SPD surge protector White 2 AC outlet(s) 10 m

- 50 Microns Pack of 100
- Gold pins
- 2 Prongs on pins
- Unshielded

Cables Direct UT-89900CT6A wire connector RJ-45 White

Canon 3851V818 staple remover Paper

Exchange Roller Kit For A4 (Sf400 & M260)

Canon Carrying Case for the imageFORMULA P-150 High Speed Scanner.

Compatibility:

-- imageFORMULA P-150
-- imageFORMULA P-150M

Patch Code Decoder for DR-G1 Series

Canon EW-60E Black

Canon Exchange Roller Kit

User-Replaceable Exchange Roller Kits Are A Recommended Purchase For Periodic Unit Maintenance. This Roller Is Compatible With The Dr-6010C/4010C.

Canon Easy Service Plan Installation service

Canon 4623B001AA

12V, 1.5C AC power adapter that is perfect for performing keyboardists and is compatible with Casio CTK-6000, 7000, WK-7500, PX-135, 330, 735 and AP-220 keyboards.
Current: 1001-1500 mA
Voltage: 12V
Power Supply: 240V
Plug Type: Barrel
Number of Outputs: 1
Polarity: Center Plus
UK/EU Power supply included: No
ChargerType: Power Supply
Made in: China
Current (mA): 1500.0

Hear every high frequency within your sound. The Celestion CDX1-1010 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Designed to deliver pristine highs that complement well-defined low frequencies. Guaranteed to project your sound without sacrificing the quality. The CDX1-1010 has a nominal impedance of 8 ohms and is capable of handling 15 watts of continuous power. Installation is quick and simple - the driver just screws into the speaker enclosure. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1010 is the perfect choice.

Hear every high frequency within your sound. The Celestion CDX1-1070 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver pristine highs that complement well-defined low frequencies. The CDX1-1070 has a nominal impedance of 8 ohms and is capable of handling 12 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1070 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1430 compression driver has a 1.4 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1430 has a nominal impedance of 8 ohms and is capable of handling 50 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1430 is the perfect choice.

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Type: PA
Power RMS (Watt): 50.0
Power: 100 W
Power RMS: 50 W
Diameter (inch): 1.0
Made in: China
Sensitivity: 107 dB
Impedance: 8 Ohm
Power (Watt): 100.0
Diameter: 1"
Frequency Range: 800 Hz - 20 kHz
Magnet Type: Neodymium
Weight: 0,75 kg

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1731 compression driver has a 1.75 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1731 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1731 is the perfect choice.

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Type: PA
Diameter: 1"
Frequency Range: 1200 Hz - 20 kHz
Diameter (inch): 1.0
Power RMS (Watt): 40.0
Power: 80 W
Power (Watt): 80.0
Made in: China
Power RMS: 40 W
Sensitivity: 110 dB
Weight: 3,0 kg
Magnet Type: Ferrite
Impedance: 16 Ohm…

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1745 compression driver has a 1.75 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver an extended frequency response with pristine highs that complement well-defined low frequencies. The CDX1-1745 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1745 is the perfect choice.

1" exit neodymium magnet compression driver.2,200 Hz recommended min. crossover freq (12 dB/oct)Single piece PETP film diaphragm and surroundSound Castle diaphragm assemblyScrew fitting
Made in: China
Frequency Range: 1200 Hz - 20 kHz
Weight: 0,75 kg
Diameter: 1"
Diameter (inch): 1.0
Power RMS: 40 W
Magnet Type: Neodymium
Power (Watt): 80.0
Power: 80 W
Impedance: 8 Ohm
Power RMS (Watt): 40.0
Sensitivity: 110 dB
Type: PA

Hear every detail within the high frequencies of your sound. The Celestion CDX14-3040 compression driver has a 3 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-3040 has a nominal impedance of 8 ohms and is capable of handling 75 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-3040 is the perfect choice.

10", cast aluminium chassis, ferrite magnet mid/bass driver. Balanced airflow venting provides enhanced cooling. Twin demodulation rings.
Type: Speaker unit
Made in: China
Weight: 5,5 kg
Magnet Type: Ferrite
Frequency Range: 60 Hz - 5 kHz
Diameter: 10"
Power (Watt): 600.0
Diameter (inch): 10.0
Power RMS: 300 W
Sensitivity: 99 dB
Impedance: 8 Ohm
Power: 600 W
Power RMS (Watt): 300.0

Optimized flux distribution in the magnet assembly provides exceptionally low harmonic distortion, for detailed sound reproduction. This 8” cast frame, ferrite magnet loudspeaker is ideal for use as a bass/mid driver in 2-way sound reinforcement cabinets, delivering 400 W continuous power handling (200 W RMS AES standard) and 93 dB sensitivity.
Power (Watt): 400.0
Diameter: 8"
Frequency Range: 70 Hz - 6 kHz
Weight: 3,8 kg
Made in: China
Sensitivity: 93 dB
Type: Speaker unit
Impedance: 8 Ohm
Power: 400 W
Diameter (inch): 8.0
Power RMS (Watt): 200.0
Magnet Type: Ferrite
Power RMS: 200 W