Other Sound & Hi-Fi

UK Vertical power distribution units (PDUs) provide reliable power distribution from a mains supply or uninterruptable power supply (UPS). Vertical mounting to the rear of a rack/cabinet gives a 0u fitment meaning that rack space is left available for critical rack mount equipment.

They are offered with outlet counts from 4-way to 20-way and can be supplied with input connectors to suit your requirements.

8 x UK sockets (output)
1 x UK plug (input)

4-Part BNC Turned Crimp Plug for RG179 75 ohm coaxial cable.

Pack of 100 Crimp Plugs

3-Part BNC Diecast Crimp Plug for RG58 50 ohm coaxial cable.

Pack of 100 Crimp Plugs

3-Part BNC Turned Crimp Plug for RG58 50 ohm coaxial cable.

Pack of 100 Crimp Plugs

3-Part BNC Diecast Crimp Plug for RG59 75 ohm coaxial cable.

3-Part BNC Diecast Crimp Plug for RG59 75 ohm coaxial cable.

Pack of 100 Crimp Plugs

3-Part BNC Turned Crimp Plug for RG59 75 ohm coaxial cable

Possibly the simplest Cat5e RJ45 Termination ever created.

Insert wires all the way through the connector.
Simple one-piece design no loading bars or liners.
Check cables in correct order.
Simply pull the connector down over the cable jacket.
Trim the cables and crimp the connector in one step with the EZ Easy Plug Crimping Tool.
Make quicker terminations and reduce waste.
Suitable for stranded or solid cable (23-26 AWG).

Cable Stripper Crimping Tool & Boots sold separately

Convenient Carry Case is also available

Possibly the simplest Cat5e RJ45 Termination ever created.

Insert wires all the way through the connector.
Simple one-piece design no loading bars or liners.
Check cables in correct order.
Simply pull the connector down over the cable jacket.
Trim the cables and crimp the connector in one step with the EZ Easy Plug Crimping Tool.
Make quicker terminations and reduce waste.
Suitable for stranded or solid cable (23-26 AWG).

Cable Stripper Crimping Tool & Boots sold separately

Convenient Carry Case is also available

1 piece RJ45 Crimp Plug for solid Cat5e UTP cable

RJ45 cables can be terminated in two different ways as defined in TIA/EIA-568. One version is called T-568A and the other is T-568B.
Both wiring standards are listed below

T-568B - Most common wiring scheme
1 - White/Orange (Transmit +)
2 - Orange (Transmit -)
3 - White/Green (Receive +)
4 - Blue
5 - White/Blue
6 - Green (Receive -)
7 - White/Brown
8 - Brown

T-568A
1 - White/Green (Receive +)
2 - Green (Receive -)
3 - White/Orange (Transmit +)
4 - Blue
5 - White/Blue
6 - Orange (Transmit -)
7 - White/Brown
8 - Brown…

The Cat5e UTP 25 x 50 Module offers Cat5e performance and supports high speed protocols up to 1G Ethernet. The low-profile design (20mm overall depth) enables enhanced cable management in backboxes and multiple cable entry options ensure optimum cable bend radii can be achieved.

There is a wire retention cap and there are multiple points for cable strain relief using the supplied cable tie.

The spring-loaded shutter prevents contamination of the RJ45 contacts when the module is not in use. The module can be terminated with either Krone style or 110 punchdown tools and there is a protected labelling facility to provide clear outlet identification.

The Cat5e UTP LJ6C Module offers Cat5e performance and supports high speed protocols up to 1G Ethernet. The low-profile design enables enhanced cable management in floor boxes and multiple cable entry options ensure optimum cable bend radii can be achieved.

There is a wire retention cap and there are multiple points for cable strain relief using the supplied cable tie.

The spring-loaded shutter prevents contamination of the RJ45 contacts when the module is not in use. The module can be terminated with either Krone or 110 punch down tools and there is a labelling facility to provide clear outlet identification.

High performance shielded connector suitable for termination of extra large outer diameter cables for Category 6 and Category 6A.

Accepts cable diameter up to 8mm.

3 prong contacts accepts solid or stranded cable.

Requires the matched crimp tool 87-2810.

RJ45 cables can be terminated in two different ways as defined in TIA/EIA-568. One version is called T-568A and the other is T-568B.
Both wiring standards are listed below

T-568B - Most common wiring scheme
1 - White/Orange (Transmit +)
2 - Orange (Transmit -)
3 - White/Green (Receive +)
4 - Blue
5 - White/Blue
6 - Green (Receive -)
7 - White/Brown
8 - Brown

T-568A
1 - White/Green (Receive +)
2 - Green (Receive …

These field termination plugs are manufactured with a fully shielded die-cast zinc alloy nickel plated body and gold plated phosphor bronze contact pins.Suitable for cable diameters between 6.00mm and 7.5mm Cable retention and strain relief is provided by the compression nut on the rear of the connector. IDC termination accepts wire gauges from 23 to 26AWG stranded or solid wire.

Termination is performed using the dedicated Crimping Tool for Cat6a Field Termination Plug.

These field termination plugs are manufactured with a fully shielded die-cast zinc alloy nickel plated body and gold plated phosphor bronze contact pins.Suitable for cable diameters between 6.00mm and 7.5mm Cable retention and strain relief is provided by the compression nut on the rear of the connector. IDC termination accepts wire gauges from 23 to 26AWG stranded or solid wire.

Termination is performed using the dedicated Crimping Tool for Cat6a Field Termination Plug.

These field termination plugs are manufactured with a fully shielded die-cast zinc alloy nickel plated body and gold plated phosphor bronze contact pins.Suitable for cable diameters between 6.00mm and 7.5mm Cable retention and strain relief is provided by the compression nut on the rear of the connector. IDC termination accepts wire gauges from 23 to 26AWG stranded or solid wire.

Termination is performed using the dedicated Crimping Tool for Cat6a Field Termination Plug.

These Keystone Panel Mount Through Couplers requires no termination just simply plug in your RJ45 cables on both sides.

Keystone fitting allows installation in most keystone panels or faceplate adapters.

Quick and easy to install.
Cat6a performance.
Easily extend cables without the need for punchdown termination.
FTP.

Performance Cat6/Cat6a shielded 2-part RJ45 Crimp plug can be terminated with generic RJ45 crimping tools.
Utilising a staggered transparent load bar to maintain pair separation and to offer a consistent level of performance.

Cat6 requires the 6mm Bubble Boots and the Cat6a requires the 6.5mm Bubble Boots

High Performance Crimp Plug
Suitable for 26AWG Stranded Conductors
2 Part Construction
Utilises low cost crimp tools

Accepts solid or stranded cable up to 7mm diameter.

RJ45 cables can be terminated in two different ways as defined in TIA/EIA-568. One version is called T-568A and the other is T-568B.
Both wiring standards are listed below

T-568B - Most common wiring scheme …

Possibly the simplest Cat6 RJ45 Termination ever created.

Insert wires all the way through the connector.
Simple one-piece design no loading bars or liners.
Check cables in correct order.
Simply pull the connector down over the cable jacket.
Trim the cables and crimp the connector in one step with the EZ Easy Plug Crimping Tool.
Make quicker terminations and reduce waste.
Suitable for stranded or solid cable (23-26 AWG).

Cable Stripper Crimping Tool & Boots sold separately

Convenient Carry Case is also available

1 piece RJ45 Crimp Plug for solid and/or stranded Cat6 UTP cable

RJ45 is a type of connector commonly used for Ethernet networking. RJ45 connectors are used for connecting Ethernet cables to equipment in computer networking applications such as telecommunications or data equipment.

RJ45 cables can be terminated in two different ways as defined in TIA/EIA-568. One version is called T-568A and the other is T-568B.
Both wiring standards are listed below

T-568B - Most common wiring scheme
1 - White/Orange (Transmit +)
2 - Orange (Transmit -)
3 - White/Green (Receive +)
4 - Blue
5 - White/Blue
6 - Green (Receive -)
7 - White/Brown
8 - Brown

T-568A
1 - White/Green (Receive +) …

2 piece RJ45 Crimp Plug for stranded Cat6 UTP cable

RJ45 cables can be terminated in two different ways as defined in TIA/EIA-568. One version is called T-568A and the other is T-568B.
Both wiring standards are listed below

T-568B - Most common wiring scheme
1 - White/Orange (Transmit +)
2 - Orange (Transmit -)
3 - White/Green (Receive +)
4 - Blue
5 - White/Blue
6 - Green (Receive -)
7 - White/Brown
8 - Brown

T-568A
1 - White/Green (Receive +)
2 - Green (Receive -)
3 - White/Orange (Transmit +)
4 - Blue
5 - White/Blue
6 - Orange (Transmit -)
7 - White/Brown
8 - Brown…

Possibly the simplest Cat6 RJ45 Termination ever created.

Insert wires all the way through the connector.
Simple one-piece design no loading bars or liners.
Check cables in correct order.
Simply pull the connector down over the cable jacket.
Trim the cables and crimp the connector in one step with the EZ Easy Plug Crimping Tool.
Make quicker terminations and reduce waste.
Suitable for stranded or solid cable (23-26 AWG).

Cable Stripper Crimping Tool & Boots sold separately

Convenient Carry Case is also available

These Keystone Panel Mount Through Couplers requires no termination just simply plug in your RJ45 cables on both sides.

Keystone fitting allows installation in most keystone panels or faceplate adapters.

Quick and easy to install.
Cat6 performance.
Easily extend cables without the need for punchdown termination.
UTP.

The Cat6 UTP 25 x 50 Angled Module offers Cat6 performance and supports high speed protocols up to 10G Ethernet. The angled design enables enhanced cable management in back boxes and multiple cable entry options ensure optimum cable bend radii can be achieved.

There is a wire retention cap and there are multiple points for cable strain relief using the supplied cable tie. The spring-loaded shutter prevents contamination of the RJ45 contacts when the module is not in use.

The module can be terminated with either Krone style or 110 punch down tools and there is a protected labelling facility to provide clear outlet identification.