Other Sound & Hi-Fi

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Magnet Type: Neodymium
Frequency Range: 800 Hz - 20 kHz
Impedance: 8 Ohm
Power (Watt): 100.0
Weight: 0,75 kg
Sensitivity: 107 dB
Diameter: 1"
Made in: China
Power: 100 W
Power RMS (Watt): 50.0
Diameter (inch): 1.0
Power RMS: 50 W
Type: PA

CDX1-1730 features a neodymium magnet, which results in a reliable and high quality HF compression driver with a massive 70% reduction in weight compared to a ferrite device with the same output. Providing 80 W continuous power handling (40 W RMS AES standard) and 110 dB sensitivity. CDX1-1730 features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Type: PA
Power RMS (Watt): 50.0
Power: 100 W
Magnet Type: Neodymium
Diameter (inch): 1.0
Power (Watt): 100.0
Sensitivity: 108 dB
Made in: China
Weight: 0,6 kg
Frequency Range: 2000 Hz - 20 kHz
Power RMS: 50 W
Impedance: 8 Ohm
Diameter: 1"…

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Type: PA
Power: 80 W
Power RMS (Watt): 40.0
Diameter: 1"
Diameter (inch): 1.0
Power (Watt): 80.0
Frequency Range: 1200 Hz - 20 kHz
Made in: China
Impedance: 16 Ohm
Power RMS: 40 W
Magnet Type: Ferrite
Weight: 3,0 kg
Sensitivity: 110 dB…

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1745 compression driver has a 1.75 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver an extended frequency response with pristine highs that complement well-defined low frequencies. The CDX1-1745 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1745 is the perfect choice.

1" exit neodymium magnet compression driver.2,200 Hz recommended min. crossover freq (12 dB/oct)Single piece PETP film diaphragm and surroundSound Castle diaphragm assemblyScrew fitting
Power: 80 W
Magnet Type: Neodymium
Impedance: 8 Ohm
Power RMS (Watt): 40.0
Power (Watt): 80.0
Power RMS: 40 W
Frequency Range: 1200 Hz - 20 kHz
Made in: China
Diameter: 1"
Weight: 0,75 kg
Sensitivity: 110 dB
Diameter (inch): 1.0
Type: PA

Hear every detail within the high frequencies of your sound. The Celestion CDX14-3040 compression driver has a 3 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-3040 has a nominal impedance of 8 ohms and is capable of handling 75 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-3040 is the perfect choice.

10", cast aluminium chassis, ferrite magnet mid/bass driver. Balanced airflow venting provides enhanced cooling. Twin demodulation rings.
Type: Speaker unit
Made in: China
Power: 600 W
Power RMS: 300 W
Weight: 5,5 kg
Diameter (inch): 10.0
Frequency Range: 60 Hz - 5 kHz
Diameter: 10"
Power RMS (Watt): 300.0
Impedance: 8 Ohm
Power (Watt): 600.0
Magnet Type: Ferrite
Sensitivity: 99 dB

Optimized flux distribution in the magnet assembly provides exceptionally low harmonic distortion, for detailed sound reproduction. This 8” cast frame, ferrite magnet loudspeaker is ideal for use as a bass/mid driver in 2-way sound reinforcement cabinets, delivering 400 W continuous power handling (200 W RMS AES standard) and 93 dB sensitivity.
Impedance: 8 Ohm
Power: 400 W
Power RMS (Watt): 200.0
Diameter (inch): 8.0
Power RMS: 200 W
Magnet Type: Ferrite
Sensitivity: 93 dB
Diameter: 8"
Power (Watt): 400.0
Frequency Range: 70 Hz - 6 kHz
Weight: 3,8 kg
Made in: China
Type: Speaker unit

With 700 W continuous power handling (350W RMS AES standard), this robust, cast aluminium replacement driver has been designed for superior sound reinforcement. Purpose-built for mid/bass applications, it really comes into its own when used with compact 12” enclosures. The efficient, Finite Element Analysis-optimised magnet structure delivers high BL (magnetic flux) for a tight, controlled low end performance that delivers truly detailed, high-definition sound reproduction.
Type: Speaker unit
Made in: China
Power RMS (Watt): 350.0
Diameter: 12"
Sensitivity: 96 dB
Magnet Type: Ferrite
Diameter (inch): 12.0
Impedance: 8 Ohm
Frequency Range: 40 Hz - 4 kHz
Power RMS: 350 W
Weight: 6,3 kg
Power …

6.5'' coaxial loudspeaker providing 150Wrms (AES standard) power handling and 92dB sensitivity. Full range frequency response: 110 – 20,000Hz. FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence. Robust cast aluminum chassis is designed to minimize unwanted reflections, further reducing acoustic distortion. Demodulation ring reduces flux modulation, minimizing electromagnetic distortion. 2'' edgewound copper clad aluminum voice coil wound on high temperature glass fibre former. 100° nominal HF coverage.
Impedance: 8 Ohm
Power (Watt): 150.0
Power: 150 W
Type: PA
Power RMS: 75 W
Power RMS (Watt): 75.0…

8'' coaxial loudspeaker providing 200Wrms (AES standard) power handling and 94dB sensitivity. Full range frequency response: 70 – 20,000Hz. FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence. Robust cast aluminium chassis is designed to minimize unwanted reflections, further reducing acoustic distortion. Demodulation ring reduces flux modulation, minimizing electromagnetic distortion. 2'' edgewound copper voice coil wound on high temperature glass fibre former. 100° nominal HF coverage.
Power RMS: 100 W
Diameter (inch): 8.0
Power RMS (Watt): 100.0
Made in: China
Type: PA
Power (Watt): 200.0
Power: 200…

Outstanding full-range sound reproduction. The Celestion FTX1225 is a coaxial driver with a nominal impedance of 8 Ohms and a total of 360W RMS power handling. Offering clear and defined audio from 50Hz all the way up to 20kHz the FTX1225 is perfect for a wide variety of system applications. This high-performance driver features a coaxially-mounted 1.75 polyimide compression driver that utilises an FEA-optimised ferrite magnet assembly. This assembly acts as a common motor for the LF and the HF drivers for significantly improved coherence. The FTX1225 also features a demodulation ring that reduces flux modulation resulting in minimised electromagnetic distortion. With eight mounting slots …

The FTX1530 is a 15″ diameter cast frame common motor coaxial speaker, with a single ferrite magnet that acts as a motor for both LF and HF drivers saving space and weight. With a 3″ voice coil, the speaker provides a 800 W continuous / 400 W (AES standard) power rating with a 97 dB LF sensitivity (106.5 dB HF sensitivity). It incorporates a 3″ voice coil compression driver to deliver a 40 Hz to 20 kHz frequency response. An external crossover is required, directing the low and high frequency parts of the input signal to the woofer and HF driver respectively.
Power RMS (Watt): 600.0
Weight: 11 kg
Sensitivity: 97 dB
Diameter: 15"
Frequency Range: 40 Hz - 4 kHz
Diameter (inch): …

Versatile 12 twin-cone design. The Celestion K12H-200TC is a 12 boasts a nominal impedance of 8 Ohms and 200W RMS power handling. With an extended frequency response ranging from 50Hz all the way up to 10kHz the K12H-200TC is perfect for a wide variety of system applications. The K12H-200TC boasts a 1.41kg ferrite magnet and a 2 high-temperature copper voice coil for exceptional reliability and performance. Reliability is further increased with an optimised cone neck/voice coil assembly as well as minimising high-frequency distortion and providing improved overall sound quality. The secondary cone is terminated by a pressure-formed cloth dust cap to enhance the clarity of the mid-band whilst …

Mids as they were meant to be heard. The Celestion TF0510MR is a 5 mid-range driver with a nominal impedance of 8 Ohms and a 30W RMS power rating. With the ability to reproduce mid frequencies with outstanding clarity and detail the TF0510MR is the perfect choice for a three-way multi-driver speaker system. The closed-back design prevents your low-frequency drivers backwave radiation from affecting the TF0510MRs motion eliminating the need for a separate mid-range enclosure in your cabinet. The pressed steel chassis and kevlar-loaded paper cone ensure your driver is well-protected and reliable whilst simultaneously delivering excellent acoustic performance. Easy to install using the four mounting …

6” mid-range driver with nominal impedance of 8 Ohm that provides 95 dB sensitivity and 100W RMS power rating (200 W continuous), ideal for two-way systems. It achieves optimal performance in compact enclosures. It features a 1.5” high temperature copper voice coil wound on polyimide former for increased reliability, vented ferrite magnet assembly for enhanced cooling and rigid pressed steel chassis design for maximum energy transfer. It is also equipped with a single suspension, polyimide former and Kevlar loaded paper cone with cloth sealed surroundings. Frequency range: 85 Hz-6 kHz. Overall diameter: 178 mm. Overall depth: 74 mm. Cut-out diameter: 147 mm. Weight: 1.4 kg.
Made in: China
…

18" pressed steel chassis, ferrite magnet subwoofer.Balanced Airflow Venting provides enhanced coolingMulti-layer voice coilCompact high flux Dual Magnet Motor design
Sensitivity: 96 dB
Power (Watt): 1000.0
Power RMS: 500 W
Diameter (inch): 18.0
Impedance: 4 Ohm
Made in: China
Magnet Type: Ferrite
Power RMS (Watt): 500.0
Power: 1000 W
Frequency Range: 35 Hz - 1 kHz
Diameter: 18"
Weight: 9,0 kg
Type: Speaker unit

Elegant 4-drawer module characterized by an asymmetrical facade.Generously-sized drawers accept documents up to 24 x 32 cm elastic sleeves.Equipped with an acess slot to facilitate withdrawal of documents and retaining stops to prevent the drawers from sliding out.Useful capacity of a drawer : 333 x 250 x H 44 mm or 450 sheets (80 g).Stackable. Anti-skids pads provided.Overall dimensions: 292 x 386 H 246 mm. 100% recyclable high quality plastic PS.

Ingeniously designed this magnetic pencil cup will enable you to always have at hand board markers and small office supplies.
Ideal for magnetic whiteboards and flat metallic surfaces. Not suitable for use on magnetic glass boards.
The back equipped with a magnet can support up to 300 g.
Capacity: 8 whiteboard markers/1 remote control/1 pad of Post-It...
Overall dim: 78 x 74 H 95 mm.
100% recyclable high quality plastic PS.

Nimbus Cart easily transports your Nimbus dry ice machine to and from the car and around the dance floor. Four high-strength, ball bearing casters allow for smooth transportation, while two locking casters securely transport Nimbus by locking it in place. Highlights:Easily transport your Nimbus dry ice machine from the car to and around the dance floorAchieve smooth transportation with four high-strength, ball bearing castersSecurely transport Nimbus and lock it in place using 2 locking castersIncreased durability with one piece steel construction Specifications:Weight: 2,7 kgDimensions: 426 x 379 x 132 mmLoad Capacity: 34 kg
Length (cm): 42.6
Weight: 2,7 kg
Load Capacity: 34 kg
Width (mm): …

CHERRY JA-2200 Headset Wired Head-band Gaming Black

CHERRY MA 3.0 UNI

Smart stable energy-saving and can be operated with one hand Whether access controls network logon or chipcard-based transactions the ST 1144 supports you in protecting your sensitive data in a simple and easy way.

- Single-handed operation through high weight and stable standing
- High-quality USB smart card reader
- Compatible chipcard types: Reads and writes on all ISO 7816 cards
- USB 2.0-compatible
- PC/SC smart card reader
- Low power consumption when idle: 2 mA

If it happens more roughly. WetEx protects keyboards from liquid spills dust and dirt.N/AN/A- Conditionally resistant to oilN/A- Resistant to dish liquidN/A- Resistant to isopropyl alcoholN/A- Under normal conditions WetEx provides > 10 Mio. operating cycles.N/A- Disposal does not cause polybrominated dibenzodioxin or dibenzofuran.N/A- Conditionally resistant to petrol