Other Sound & Hi-Fi

classic cable for ambitious musicianspure sound pleasure for stage, studio and rehearsal roomtop-quality materials: PVC jacket, Cu spiral shielddelivers a powerful, transparent and assertive soundfat twisted-core design, minimum interferencelow capacitance
Type-A Connector: XLR Male
Type-B Connector: XLR Female
Made in: Germany
Length: 100 cm
Colour: Black
~ Length: 1 m

Classic cable for ambitious musicians, pure sound pleasure for stage, studio and rehearsal room, top-quality materials: PVC jacket, Cu spiral shield, delivers a powerful, transparent and assertive sound, fat twisted-core design, minimum interference, low capacitance
Colour: Black
~ Length: 5 m
Type-B Connector: XLR Female
Type-A Connector: XLR Male
Length: 5 m
Made in: Germany

Microphone cable series M1, used cable MY206, connectors XLR female NC3FXX - XLR male NC3MXX - NEUTRIK silver, cable color black, cable length 7.5 m
Length: 7,5 m
Type-B Connector: XLR Female
Type-A Connector: XLR Male
~ Length: 7,5 m
Colour: Black

The Klotz M1FM1N1000 Neutrik XLR 3-pole – XLR 3-pole microphone cable 10 meters delivers the goods. The Neutrik XLR connectors are very durable and precise. The cable stays precisely where you left it, thanks to the flexible design that prevents it from curling up. The Klotz M1FM1N1000 microphone cable leaves nothing to chance.
Colour: Black
~ Length: 10 m
Length: 10 m
Type-A Connector: XLR Male
Type-B Connector: XLR Female
Made in: Germany

Low-capacitance microphone cable with nickel-plated XLR connectors from M1 series that is a classic accessory for ambitious musicians and delivers a powerful, transparent and assertive sound for any stage, studio and rehearsal room. It features a fat twisted-core design for minimum interference, copper spiral shielding and a PVC jacket. Cable length: 5 m. Black colour.
~ Length: 5 m
Length: 5 m
Type-A Connector: XLR Female
Type-B Connector: XLR Male
Made in: Germany

Microphone cable with XLR by KLOTZ. Classic cable for ambitious musicians. Pure sound pleasure for stage, studio and rehearsal room. Top-quality materials: PVC jacket, Cu spiral shield. Delivers a powerful, transparent and assertive sound. Fat twisted-core design, minimum interference and low capacitance. Leght: 10 m.
Type-A Connector: XLR Female
Length: 10 m
Type-B Connector: XLR Male
~ Length: 10 m
Made in: Germany

Low-capacitance microphone cable with nickel-plated XLR connectors from M1 series that is a classic accessory for ambitious musicians and delivers a powerful, transparent and assertive sound for any stage, studio and rehearsal room. It features a fat twisted-core design for minimum interference, copper spiral shielding and a PVC jacket. Cable length: 15 m. Black colour.
Made in: Germany
~ Length: 15 m
Length: 15 m
Type-A Connector: XLR Female
Type-B Connector: XLR Male

Superior microphone cable with extra thick outer jacket and Neutrik XLR, ideal for tough road life, with outer jacket of reinforced PVC and outer diameter of 6.5 mm. For professional sound standards. Nuanced delivery, top-quality materials: PVC jacket, Cu spiral shield, fat twisted-core design. Minimum interference low bending radius of only 30 mm. Treble-friendly capacitance of 60 pF/m. Lenght 10 m.
Type-B Connector: XLR Female
Length: 10 m
Made in: China
Type-A Connector: XLR Male
~ Length: 10 m
Colour: Black

High-end assembled microphone cable from M5 series that is suitable for professional stage and studio settings full of high and low frequency interference. It features two silver XLR 3-pole connectors (male and female), double shielding and PVC sheath. Cable length: 6 m. Black colour.
Made in: China
Colour: Black
Length: 6 m
Type-B Connector: XLR Female
Type-A Connector: XLR Male
~ Length: 6 m

Keep your scanner in tip-top shape by cleaning it 2 to 4 times a week with one of these wipes. These are sold in boxes of 50 sheets.

Kodak Alaris 142 8101 Consumable kit

Kit includes: 1 feed module 1 separation roller 18 pre-separation pads and 50 replacement tires

Recommended maintenance:

- Feed module and separation roller tires: tire life will vary depending upon paper types environment and cleanliness. Normal tire life is approximately 500000 pages; results will vary. Degradation of feeder performance multiple feeds stoppages etc. indicate a need to change tires. It is also recommended that all tires on the feed module & separation roller be changed at the same time. The kit includes extra tires in the event one is damaged when replacing tires.
- Feed module and separation roller: it is recommended that you install a new feed module and separation …

Kodak Alaris Extra Large Feeder Consumables Kit

Kodak Alaris Feeder Module

Includes: 1 feed moduleN/AUsage: this module has the potential to scan up to 500000 pages.

Includes: 12 tires and 2 pre-separation pads
Usage: See the table on page 33 for a guideline on how often to change consumables.

These tires are for use on the feed module and separation module.

Includes: 1 separation moduleN/AUsage: this module is used for document scanning has the potential to scan up to 250000 pages.

Includes: 4 pre-separation padsN/AUsage: the pre-separation pad has the potential to scan up to 20000-50000 pages.

S2050 / 70 / 60W / 80W Feed Roller Kit

ALARIS S2000 Carrier Sleeves (5 pack)

Stable footrest for musicians that is height-adjustable to 6 different positions, from 119 to 264 mm. It features a steel construction with large non-skid plastic pad and heavy-duty legs for added stability. Dimensions: 250 x 98 mm. Weight: 0.6 kg. Black colour.
Made in: Germany

The K&M Popkiller - a world-wide classic. For stands with diameter of up to 30 mm. Double nylon screen for superior performance. Unobtrusive black round filter frame. Non-marring locking screw prevents scratching of mic stand. Specifications:- Material: steel- Screw-on to: tube diameter up to 30 mm- Special features: double nylon screen with plastic frame- Weight: 0.2 kg

Compact holder that allows for attachment of microphone to the drum set and can be easily mount and remove. Its construction is made of steel and features noise and shock absorbing rubber inserts which also provide a better fit. The microphone can be connected via standard 3/8” threaded connector. Height: 60 mm. Weight: 0.11 kg. Black colour.
Made in: Germany

A Pristine, Compact Sound Amplifier You Build Yourself
The HA-S is a Nutube-equipped DIY Headphone amp kit that will let you enjoy the highest quality audio anywhere. No soldering is required, so even if you are new to the world of DIY, you will be able to assemble the HA-S to add a warm, analog tube-driven signal boost to any sound source in no time!
Made in: Japan
UK/EU Power supply included: No
Inputs: Jack 3,5 mm
Outputs: Jack 3,5 mm
Type: Headphone Amp
Power Supply: None, Only Battery Operated
Controls: Volume
Battery Operation: Yes
Battery Type: AA
Impedance: 10 Ohm
Weight (g): 110.0
Colour: Black