Other Sound & Hi-Fi

The NEWlink power extension blocks are perfect for home and office use and have a 2 3 5 or 10 metre cable to provide power to work stations and any home or office equipment that uses a standard UK plug.N/AN/AThe surge protected models provide better protection to electrical equipment by protecting against voltage spikes. The sockets are individually switched allowing greater control.N/AN/A- Individually switchedN/A- Surge protection status LEDN/A- HO5VV-F 3G 1.25mm2 cableN/A- 13AmpN/A- White

The NEWlink power extension blocks are perfect for home and office use and have a 2 3 5 or 10 metre cable to provide power to work stations and any home or office equipment that uses a standard UK plug.

The surge protected models provide better protection to electrical equipment by protecting against voltage spikes. The sockets are individually switched allowing greater control.

- Individually switched
- Surge protection status LED
- HO5VV-F 3G 1.25mm2 cable
- 13Amp
- White

The NEWlink power extension blocks are perfect for home or office use they have various lengths sockets and are either surge protected or non surge protected.

- Surge protection status LED
- White

- 50 Microns Pack of 100
- Gold pins
- 2 Prongs on pins
- Unshielded

The CAT6A punch down module is 50 x 25mm punch down module to fit in faceplates.

Instant Staple Remover-A1Increase High-Volume Scan Productivity With One-Touch Staple Removal For Streamlined Workflows (Manufactured By Max Co. Ltd).Save Time By Accelerating Your Scan WorkflowsEfficiently Remove Staples To Ensure Your Documents Are Ready For Scanning And Copying. Simple One-Touch Operation Streamlines Preparation Of Documents And Together With Canon Imageformula Production Scanners Accelerates Digital Workflow Processes.Quick And Easy Staple RemovalSpeed Up Pre-Scan Preparation Of Documents With One-Touch Staple Operation. Simply Align The Staple With The Led Light And Press The Switch &Ndash; Also Compatible With Footswitches.Minimal Document DamageNeat Staple Removal Reduces …

Exchange Roller Kit For A4 (Sf400 & M260)

Canon Carrying Case for the imageFORMULA P-150 High Speed Scanner.

Compatibility:

-- imageFORMULA P-150
-- imageFORMULA P-150M

Canon EW-60E Black

Canon Exchange Roller Kit

Easy Service Plan Installation ServiceEasy Service Plan Installation Service - Imageformula Production Scanner. For The Dr-G1100/G1130/X10c

Exchange Roller Kit For Cr190i

The Casio AD-A12150LW power supply is suitable for a wide range of portable keyboards from Casio. The lightweight construction of the AD-A12150LW power supply enables it to be transported easily while the matte black colour keeps it hidden from sight. Please see below for all compatible Casio products - please check your owners manual.

Hear every high frequency within your sound. The Celestion CDX1-1010 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Designed to deliver pristine highs that complement well-defined low frequencies. Guaranteed to project your sound without sacrificing the quality. The CDX1-1010 has a nominal impedance of 8 ohms and is capable of handling 15 watts of continuous power. Installation is quick and simple - the driver just screws into the speaker enclosure. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1010 is the perfect choice.

Hear every high frequency within your sound. The Celestion CDX1-1070 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver pristine highs that complement well-defined low frequencies. The CDX1-1070 has a nominal impedance of 8 ohms and is capable of handling 12 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1070 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1430 compression driver has a 1.4 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1430 has a nominal impedance of 8 ohms and is capable of handling 50 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1430 is the perfect choice.

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Impedance: 8 Ohm
Power (Watt): 100.0
Sensitivity: 107 dB
Frequency Range: 800 Hz - 20 kHz
Diameter: 1"
Diameter (inch): 1.0
Power RMS: 50 W
Made in: China
Power: 100 W
Power RMS (Watt): 50.0
Weight: 0,75 kg
Type: PA
Magnet Type: Neodymium

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1731 compression driver has a 1.75 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1731 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1731 is the perfect choice.

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Type: PA
Weight: 3,0 kg
Made in: China
Magnet Type: Ferrite
Power RMS (Watt): 40.0
Power: 80 W
Frequency Range: 1200 Hz - 20 kHz
Diameter (inch): 1.0
Impedance: 16 Ohm
Sensitivity: 110 dB
Power RMS: 40 W
Diameter: 1"
Power (Watt): 80.0…

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1745 compression driver has a 1.75 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver an extended frequency response with pristine highs that complement well-defined low frequencies. The CDX1-1745 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1745 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX14-2420 compression driver has a 2.4 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-2420 has a nominal impedance of 8 ohms and is capable of handling 70 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-2420 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX14-3050 compression driver has a 3 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-3050 has a nominal impedance of 8 ohms and is capable of handling 75 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-3050 is the perfect choice.

10", cast aluminium chassis, ferrite magnet mid/bass driver. Balanced airflow venting provides enhanced cooling. Twin demodulation rings.
Type: Speaker unit
Frequency Range: 60 Hz - 5 kHz
Power RMS: 300 W
Diameter (inch): 10.0
Diameter: 10"
Power: 600 W
Power (Watt): 600.0
Impedance: 8 Ohm
Weight: 5,5 kg
Sensitivity: 99 dB
Power RMS (Watt): 300.0
Magnet Type: Ferrite
Made in: China

Balanced and well-defined mids. The Celestion FTR08-2011D is an 8 mid-range driver with a 2 round copper voice coil and ferrite magnet. With a nominal impedance of 8 ohms and a 300 watt continuous power rating the FTR08-2011D faithfully reproduces every detail within the mid frequencies. The perfect choice for a three-way multi-driver speaker. The FTR08-2011D is constructed with a lightweight cast aluminium chassis. Providing structural integrity and ensuring minimal interference with the voice coils ferrite magnet. With a kevlar loaded paper cone the 8 driver is able to deliver superior acoustic performance. Easy to install using the four mounting slots this compact driver is designed to fit …