Other Sound & Hi-Fi Neumann

The Neumann REK 3 Electronics Kit is designed for use with KH 805 KH810 or KH 870 active subwoofers. The Neumann REK 3 consists of a cover plate for the subwoofer an electronics chassis and two cable harnesses with Neutrik SpeakON chassis connectors. The REK 3 allows you to remotely position the rear electronics panel up to 30 metres away from the subwoofer enclosure. The REK 3 electronics chassis features a heavy-duty construction and can be installed within a 19 rack unit.

A modern classic. Preserve the integrity of your signal with the Neumann V402 Microphone Preamp. This is the first preamp that Neumann have launched since the groundbreaking V 476b in the 80s which is still highly sought after. Whether theyre modern or vintage designs Neumann products have never been anything short of groundbreaking and the V 402 is a testament to this. The V402 features two transformerless preamps and high impedance instrument inputs. These are designed to reinforce the sonic image presented by the microphone and instrument. That means what you hear in the room is what youll hear in the speakers. The V 402 is designed to project your sound to be heard by the masses. Free from …

Foam wind shields prevent disturbing sounds that arise from wind, rapid movements of the microphone pole or sensing from a short distance. They are made of special foam (polyurethane foam with open cells) and do not cause disturbing resonances or affect the directional characteristics of the microphone. The only negative is a slight attenuation of frequencies in the highest band. Wind noise attenuation is approx. 18 dB, measured without electrical filtration in a wind speed of 20 km/h created by a quiet fan. Attenuation at a frequency of 15 kHz is approx. 2 dB. WNS 100 is designed for Series 100, Series 180, KM A and KM D microphones. The diameter of the wind shield is 45 mm. It is produced …

Foam wind shields prevent disturbing sounds that arise from wind, rapid movements of the microphone pole or sensing from a short distance. They are made of special foam (polyurethane foam with open cells) and do not cause disturbing resonances or affect the directional characteristics of the microphone. The only negative is a slight attenuation of frequencies in the highest band. Wind noise attenuation is approx. 26 dB, measured without electrical filtration in a wind speed of 20 km/h created by a quiet fan. Attenuation at a frequency of 15 kHz is approx. 3 dB. WS 87 is intended for microphones M 147 Tube, TLM 50, TLM 67, TLM 103, TLM 103 D, TLM 170 R and U 87 Ai. The diameter of the wind protection …

Foam wind shields prevent disturbing sounds that arise from wind, rapid movements of the microphone pole or sensing from a short distance. They are made of special foam (polyurethane foam with open cells) and do not cause disturbing resonances or affect the directional characteristics of the microphone. The only negative is a slight attenuation of frequencies in the highest band. Wind noise reduction is approx. 27 dB, measured without electrical filtration in a wind speed of 20 km/h created by a quiet fan. Attenuation at a frequency of 15 kHz is approx. 3 dB. WSS 100 is designed for microphones KMS 104/105, KMS 140/150 and microphone heads KK 104/105. The diameter of the wind protection is 90 …