Other Sound & Hi-Fi

Cables Direct RB-10-4GANGSWD surge protector White 4 AC outlet(s) 10 m

The NEWlink power extension blocks are perfect for home and office use and have a 2 3 5 or 10 metre cable to provide power to work stations and any home or office equipment that uses a standard UK plug.

The surge protected models provide better protection to electrical equipment by protecting against voltage spikes. The sockets are individually switched allowing greater control.

- Individually switched
- Surge protection status LED
- HO5VV-F 3G 1.25mm2 cable
- 13Amp
- White

The NEWlink power extension blocks are perfect for home or office use they have various lengths sockets and are either surge protected or non surge protected.

- Surge protection status LED
- White

- 50 Microns Pack of 100
- Gold pins
- 2 Prongs on pins
- Unshielded

Canon 3851V818 staple remover Paper

Exchange Roller Kit For A4 (Sf400 & M260)

Canon Carrying Case for the imageFORMULA P-150 High Speed Scanner.

Compatibility:

-- imageFORMULA P-150
-- imageFORMULA P-150M

Patch Code Decoder for DR-G1 Series

Lens hood for the EF-M 11-22mm f/4-5.6 IS STM Lens.

The Lens Hood EW60E is designed specifically for the EF-M 11-22mm f/4-5.6 IS STM Lens. it is a two-pronged petal-shaped bayonet mount hood.

FeaturesN/A- Exchange Roller Kit.N/A- Works with the DR-C125.N/A- User installable.

User-Replaceable Exchange Roller Kits Are A Recommended Purchase For Periodic Unit Maintenance. This Roller Is Compatible With The Dr-6010C/4010C.

Easy Service Plan Installation ServiceEasy Service Plan Installation Service - Imageformula Production Scanner. For The Dr-G1100/G1130/X10c

Exchange Roller Kit For Cr190i

12V, 1.5C AC power adapter that is perfect for performing keyboardists and is compatible with Casio CTK-6000, 7000, WK-7500, PX-135, 330, 735 and AP-220 keyboards.
Number of Outputs: 1
Current: 1001-1500 mA
Current (mA): 1500.0
UK/EU Power supply included: No
Power Supply: 240V
ChargerType: Power Supply
Made in: China
Voltage: 12V
Polarity: Center Plus
Plug Type: Barrel

Hear every high frequency within your sound. The Celestion CDX1-1010 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Designed to deliver pristine highs that complement well-defined low frequencies. Guaranteed to project your sound without sacrificing the quality. The CDX1-1010 has a nominal impedance of 8 ohms and is capable of handling 15 watts of continuous power. Installation is quick and simple - the driver just screws into the speaker enclosure. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1010 is the perfect choice.

Hear every high frequency within your sound. The Celestion CDX1-1070 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver pristine highs that complement well-defined low frequencies. The CDX1-1070 has a nominal impedance of 8 ohms and is capable of handling 12 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1070 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1430 compression driver has a 1.4 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1430 has a nominal impedance of 8 ohms and is capable of handling 50 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1430 is the perfect choice.

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Sensitivity: 107 dB
Impedance: 8 Ohm
Frequency Range: 800 Hz - 20 kHz
Power (Watt): 100.0
Diameter: 1"
Type: PA
Diameter (inch): 1.0
Power: 100 W
Power RMS: 50 W
Weight: 0,75 kg
Made in: China
Magnet Type: Neodymium
Power RMS (Watt): 50.0

CDX1-1730 features a neodymium magnet, which results in a reliable and high quality HF compression driver with a massive 70% reduction in weight compared to a ferrite device with the same output. Providing 80 W continuous power handling (40 W RMS AES standard) and 110 dB sensitivity. CDX1-1730 features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Weight: 0,6 kg
Power: 100 W
Type: PA
Sensitivity: 108 dB
Made in: China
Power (Watt): 100.0
Diameter: 1"
Frequency Range: 2000 Hz - 20 kHz
Magnet Type: Neodymium
Power RMS (Watt): 50.0
Impedance: 8 Ohm
Power RMS: 50 W
Diameter (inch): 1.0…

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Diameter (inch): 1.0
Frequency Range: 1200 Hz - 20 kHz
Power (Watt): 80.0
Weight: 3,0 kg
Power RMS: 40 W
Type: PA
Impedance: 16 Ohm
Diameter: 1"
Magnet Type: Ferrite
Power: 80 W
Sensitivity: 110 dB
Made in: China
Power RMS (Watt): 40.0…

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1745 compression driver has a 1.75 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver an extended frequency response with pristine highs that complement well-defined low frequencies. The CDX1-1745 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1745 is the perfect choice.

1" exit neodymium magnet compression driver.2,200 Hz recommended min. crossover freq (12 dB/oct)Single piece PETP film diaphragm and surroundSound Castle diaphragm assemblyScrew fitting
Made in: China
Power: 80 W
Impedance: 8 Ohm
Diameter: 1"
Weight: 0,75 kg
Type: PA
Sensitivity: 110 dB
Magnet Type: Neodymium
Frequency Range: 1200 Hz - 20 kHz
Diameter (inch): 1.0
Power (Watt): 80.0
Power RMS (Watt): 40.0
Power RMS: 40 W

Hear every detail within the high frequencies of your sound. The Celestion CDX14-3040 compression driver has a 3 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-3040 has a nominal impedance of 8 ohms and is capable of handling 75 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-3040 is the perfect choice.

10", cast aluminium chassis, ferrite magnet mid/bass driver. Balanced airflow venting provides enhanced cooling. Twin demodulation rings.
Type: Speaker unit
Power: 600 W
Impedance: 8 Ohm
Frequency Range: 60 Hz - 5 kHz
Magnet Type: Ferrite
Diameter (inch): 10.0
Power RMS (Watt): 300.0
Power RMS: 300 W
Made in: China
Diameter: 10"
Sensitivity: 99 dB
Power (Watt): 600.0
Weight: 5,5 kg