DJ Accessories Palmer

The Palmer Elde Passive 2-Channel DI-Box is the perfect choice for guitarists bassists keyboard players and synthesizers who want to balance and impedance match their instruments. It has a two-channel model that allows you to connect stereo signals or two instruments at once and features galvanic transformer isolation which eliminates ground loop hum. Plus its pure and unaltered low-noise audio ensures that your signal remains true to its original form. This DI-Box also features a switchable 30 dB pad for extremely high input levels such as amplifier outputs as well as a Thru-out port for routing the input signal directly to an amplifier. Its solid casing made of aluminium and steel is designed …

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Input connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance:
Made in: Germany
Тype: DI Box
UK/EU Power supply included: No

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Power Supply: 48V Phantom
Made in: Germany
Тype: DI Box
UK/EU Power supply included: No
Battery Operation: Yes

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanced lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The active circuitry preserves frequency response and provides increased dynamics. The unit also features a 1/4" direct out and switchable -30 dB pad on each channel. An additional balanced XLR output merges both input signals to mono, e.g. for summing the L and R channels of a stereo instrument. With its tough construction, the PAN04A is equally suitable for stage and studio use. It operates on any standard …

Passive 2-channel DI Box. The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Dimensions: Width: 110 mm, Depth: 110 mm, Height: 45 mm - Weight: 0.419 kg
Outputs: Jack 6,3 mm TS;XLR
Тype: Passive;DI Box
Made in: Germany
Height (mm): 45.0
Inputs: Jack 6,3 mm TS
Headphone Output: No
UK/EU Power supply included: No
Width (mm): 110.0
Power Supply: Passi…

Passive 8-channels 19" DI Box. Through the special MERGE LINK/IN function, the front LINK output can be used as a second input.The signal is then mono merged with the one from the INPUT jack through to the output. Thus, the PAN16 offers a maximum of 16 inputs. Two PAD buttons enable an attenuation of 10, 20 or 30 dB. The XLR outputs are electrically isolated and balanced via transformer. 8 additional LINK-sockets are also available on the rear panel of the device. Dimensions: 480 (19") x 200 x 45 mm (1 U), Weight 2,39 kg
Тype: DI Box
UK/EU Power supply included: No
Made in: Germany
Rackmountable: Yes

The Palmer PDI 03 JB is a passive DI box for guitar amps that simulates speakers and cabinets to give you organic consistent guitar tones on stage and in studios. The PDI 03 JBs speaker simulation gives your direct guitar tone an organic sound that prevents you having to set mics up on cabinets and achieve a polished professional sounding signal. This DI box developed in collaboration with Joe Bonamassa also features a "JB Switch" which brings your guitar tone front and centre. The PDI 03 JBs speaker simulations offer several different filter modes allowing you to recreate the voicing of popular vintage and modern guitar speakers at the push of a switch. This DI box pairs perfectly with amp …

The Palmer Wipper is a passive stereo DI box for balancing guitars bass keyboards and synthesizers before connecting them to amplifiers or mixers. The perfect tool for performers studios and live engineers. The Wipper is designed to match impedance and convert unbalanced signals into balanced ones ensuring that noise and interference are minimised. This DI box also offers galvanic transformer isolation making it easy to break ground loops and prevent interference. The Wippers durable aluminum and steel construction ensures it can hold up under the most intensive use.