Guitar Accessories Behringer

Analogue modelling acoustic guitar preamp/stompbox with DI recording output that has been designed to compete head to head with leading products on the market. Its authentic tube/microphone modelling circuitry provides the natural warmth and presence, as if the acoustic guitar was miked through a tube pre-amp. It features the ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezo pickups; dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode; and ground lift switch that eliminates typical ground loop problems. Device has super-high impedance to retain …

Compression/sustain effect pedal for guitar that compress loud and boost low signals without degrading the original sound. Effect provides dedicated Level, Tone, Attack and Sustain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Battery Operation: Yes
Тype: Compressor;Sustainer
Power Supply: Adapter
Made in: China

Digital stereo reverb effects pedal for electric guitar that is comparable to state-of-the-art studio processors and delivers 24-bit high-resolution stereo reverbs including Spring, Plate, Hall, Gate, Room and Modulate. It features dedicated Mode, Time, Tone and Level controls for awesome sound shaping, a status LED for effect on/off and battery check and a first-class electronic On/Off switch for signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Battery Detail: Al/Mn
UK/EU Power supply included: No
Battery Operation: Yes
Made in: China
Power Supply: Adapter
Тype: Reverb…

An authentic re-creation of a vintage classic, the Behringer Dual-Phase is sure to please fans of wondrous '70s phase warble! Behringer designed this 12 opto-coupler dual phaser to deliver all the analog depth you could ask for. Two sweep generators — each with individual rate and shape controls — produce phase-shifted tones that range from a subtle drift to wildly intense modulation. While it sounds incredible with guitar, musicians will love how the Dual-Phase sounds just as good with a variety of other instruments — the CV input makes it a natural combo with a good synthesizer. Constructed with a robust dual-footswitch metal chassis, the Behringer Dual-Phase is a reliable (and affordable) pathwa…

Robust 7-band EQ pedal for electric and electric-acoustic guitar that shapes the sound and eliminates unwanted feedback. Pedal offers a wide frequency range – from 100 Hz to 6.4 kHz, with a powerful 15 dB boost or cut of each EQ band. It is equipped with a first-class electronic on/off switch for highest signal integrity n bypass mode, and status LED for on/off and battery check. Powered by 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Power Supply: Adapter
UK/EU Power supply included: No
Battery Operation: Yes
Made in: China
Тype: Equalizer

Get louder, get quieter, or get modulated with the outstanding FOOT CONTROLLER FCV100. This versatile pedal works equally well as a volume or modulation pedal – without tying up your hands or slowing down your performance.The FCV100 can accommodate two mono or one stereo instrument via its dual 1,4" Input jacks. By switching into Norm mode, the FCV100 is capable of controlling the volume of two individual instruments. In CV mode the FCV100 can control modulation and volume levels of other musical instruments by connecting Output 2 to the volume or modulation input of the instrument. In CV mode, when Output 2 is in use, Input/Output 1 can still be used for controlling the volume of another …

Digital multi-effects pedal comparable to state-of-the-art studio processors that features 24-bit/40 kHz high-resolution stereo effects including Chorus, Flanger, Phaser, Delay, Tremolo and Pitch Shifter. It also provides dedicated Level control plus 2 additional parameter controls for adjustment of delay time, flanger rate etc., a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Тype: Multieffect
UK/EU Power supply included: No
Battery Operation: Yes
Battery T…

The Behringer GB3002-A Acoustic Guitar Stand is built to keep your guitar supremely protected giving you peace of mind when youre not in action. Its heavy duty durable metal tube design offers a secure and reliable place for you to store your acoustic whilst the secure lock system ensures it stands firmly in place. And thanks to a layer of soft padding and the rubber back rest you can be sure that no damage will come to your prized instrument. When you want to pack up and go do so effortlessly - say goodbye to the days of fiddling with complicated contraptions and lugging heavy gear around. The GB3002-A is wonderfully lightweight and folds down easily lending itself to stress-free transportation.…

Behringer has designed a foldable electric guitar stand for easy transportation and storage. This lightweight A-frame features metal construction, rubber feet, and secure lock system to keep your guitar stand in place. It is covered with soft padding which helps ensure your guitar is safe in place. The secure lock system helps keep your guitar stand in place to avoid any accidental spills. These foldable stands are easy to transport or store and take up almost no room. That leaves more room for gear! The GB3002-E is covered with soft padding which helps ensure your guitar won’t go anywhere! The rubber back rest will prevent your guitar from sliding around while mounted on the folding guitar …

Distortion effect pedal for electric guitar that pushes distortion to the extreme by producing crushing, bottom-heavy distortion for modern metal and hard rock. It features gain boost circuitry that delivers super-thick and heavy distortion with low-end punch and endless sustain, dedicated Gain Boost, Distortion, Tone, Bottom and Level controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and first-class electronic on/off switch for highest signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Made in: China
Тype: B…

Compact 2-channel hum eliminator/DI-box that removes hum caused by AC power or ground loops while maintaining the highest sonic quality, and converts between balanced and unbalanced signals without any signal loss, perfect for use with unbalanced equipment and balanced audio system. It is equipped with two 1/4" TRS inputs and outputs and allows for cleaning two mono signals or one stereo signal. Unit is also completely passive and does not require any power supply. Dimensions: 32 x 57.5 x 103.6 mm. Weight: 180 g.
UK/EU Power supply included: No
Тype: Noise Reducer
Made in: China

Distortion effect pedal for guitar that features ultra-high gain circuitry and produces huge guitar tone which used to be available only from high-gain amps with endless sustain – sound like hard rock/heavy metal distortion of the 80’s. Effect provides dedicated Distortion, Low, High and Level controls, status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Width (mm): 70.0
Battery Type: 9V
Power Supply: Adapter or Battery;9V DC ( - );Adapter
USB: No
Number of Buttons: 1
Depth (mm): 123.0
Battery Operation: Yes
Weight (g):…

The OCTAVE DIVIDER is an authentic recreation of the popular Octave Divider from the ‘70s. It features an earth-shaking sub-octave effect with its own MIX and TONE controls so you can blend your dry and sub-octave signal, or shape that tone to your taste while still preserving the dynamics and harmonics. The BASS ONLY switch also allows you to completely cut out the dry signal leaving only the sub-octave so you can create your own complex basslines on the fly. The OCTAVE DIVIDER brings all the amazing features from the original ‘70s design, plus a few modern ones, that are sure to fit right at home with any pedal board. The OCTAVE DIVIDER has an amazing RINGER function that adds …

Overdrive and distortion pedal for electric guitar that combines the overdrive and distortion effects for a wide range of tones, suitable for use with both single-coil and humbucker pickups. It features dedicated Level, Tone, Drive and Mode controls, status LED for effect on/off and battery check, and first-class noiseless electronic on/off switch that maintains excellent signal integrity in bypass mode. Pedal is equipped with 1/4" input and output, and can be powered by 9 V battery or PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: 330 g.
Made in: China
UK/EU Power supply included: No
Тype: Distortion;Overdrive

Fuzz/distortion effect pedal for guitars that recreates the gamut of famous fuzz tones from the 60’s and 70’s and offers switch for 3 different sound modes: Fuzz 1 (classic fuzz), Fuzz 2 (grunge) and gain Boost. It provides dedicated Gain, Bass, Treble and Level, controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g..
Тype: Fuzz
Power Supply: Adapter
UK/EU Power supply included: No
Battery Operation: Yes
Made in: China

The Behringer SPRING REVERBERATION 636 is a legendary spring reverb module available in a compact and portable Eurorack format. Let’s dive into the details:Overview:The SPRING REVERBERATION 636 is designed to recreate the lush and dynamic reverb sound of the original Grampian Type 636 spring reverb unit.It’s a no-nonsense reverb module with dual mechanical springs, providing an authentic spring reverb experience.Unlike digital emulations, the 636 delivers that classic spring reverb tone that no other reverb type can match.Features:Legendary Sound: The 636 faithfully emulates the spring reverb used by iconic musicians like Pete Townshend and Lee “Scratch” Perry.Overload Circuit: The module includes…

Setting up amps, dialing in tones and positioning mics takes a lot of time and patience. Step on the amazing TUBE AMP MODELER TM300 and skip straight to the good part! The TM300 features authentic modeling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations that let you easily achieve the most sought-after tube amp sounds – from clean to crunch to super-fat distortion.
Тype: Equalizer;Tube Amp Modeler;Distortion
UK/EU Power supply included: No
Battery Operation: Yes
Made in: China
Power Supply: Adapter

Overdrive effect pedal for guitars that features original 4558 op amps and MA150 distortion diodes, and delivers the classic, authentic vintage vacuum tube-like sound. It provides dedicated Drive, Tone and Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Battery Operation: Yes
Made in: China
Тype: Overdrive

A chromatic pedal tuner. It offers 7 different tuning modes including normal, flat, double flat and chromatic mode. The tuning progress is displayed via a single-digit LED display and an 11-point stream meter. Two additional directional LEDs indicate the required tuning direction. In addition, the tuner is equipped with one ¼'' input, one ¼'' output and a Bypass output. Powered by a 9V battery or a 9V adapter (not included).
Made in: China
UK/EU Power supply included: No

Stereo chorus guitar effect pedal that features dedicated Level, Tone, Rate and Depth controls for an incredible sound shaping. It also provides a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Тype: Chorus
Power Supply: Adapter
UK/EU Power supply included: No
Battery Operation: Yes
Made in: China

A distortion effect pedal. It has dense, tube-like distortion sound with an endless sustain. Its ideal for extreme hard rock or heavy metal sounds. The sound is adjusted using Distortion, Level potentiometers and a 3-band equalizer. In addition, it is equipped with a blue status LED, foot switch and ¼'' In/Out connectors. The effect is powered by a 9 V battery or adapter (not included).
UK/EU Power supply included: No
Battery Operation: Yes
Тype: Overdrive;Distortion
Made in: China

3-mode octaver effect pedal for electric bass guitar that allows for creating a monster sound by adding 2 additional tones using the guitar—1 and 2 octaves below the original tone. Pedal provides dedicated volume controls for all 3 tone types for awesome sound shaping, a flexible 3-mode Range switch that allows ultimate bass performance, a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Made in: China
Power Supply: Adapter
Battery Operation: Yes
UK/EU Power supply included: No
Тype: Oct…

Tremolo effect pedal for electric guitar that offers the classic, warm and mind-bending tremolo effects of vintage ‘60s amps. It provides dedicated Rate, Wave and Depth controls for awesome sound shaping, features a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 173 x 99 x 58 mm. Weight: 272 g.
Made in: China
Battery Operation: Yes
UK/EU Power supply included: No
Power Supply: Adapter
Тype: Tremolo

Analog bucket-brigade delay effect pedal for guitar with up to 300 ms of delay and optionally separate wet and dry outputs that provides true analog delay experience and vintage vibe of real slap-back echo. It features advanced noise reduction circuit that keeps the signal clean, dedicated Intensity, Echo and Repeat Rate controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and first-class electronic on/off switch that offers noise-free operation. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Made in: China
UK/EU Power supply included: No
Battery …