Drum Accessories Tama

The Tama Steel 13 20 Strand Snare Wire with Starclassic Logo is a high quality snare wire from Tama featuring 20 strands of carbon steel that provides a powerful response and shell sound as well as being incredibly durable and long lasting. Tama have redesigned the angle of the end plates on the wires and made the straps thinner resulting in the optimum response available. The Tama Starclassic logo is featured on the end plates. These wires are suitable for regular 13 snare drums.

The Tama Steel 14 20 Strand Snare Wire with Starclassic Logo is a high quality snare wire from Tama featuring 20 strands of carbon steel that provides a powerful response and shell sound as well as being incredibly durable and long lasting. Tama have redesigned the angle of the end plates on the wires and made the straps thinner resulting in the optimum response available. The Tama Starclassic logo is featured on the end plates. These wires are suitable for regular 14 snare drums.

The Tama Steel 14 Snare Wire 20 Strand is a high quality snare wire from Tama featuring 20 strands of carbon steel that provides a powerful response and shell sound as well as being incredibly durable and long lasting. The carbon steel used in Tamas snare wires improve your snare drums sensitivity allowing you to play and be heard at all volumes and speeds. These wires are suitable for regular 14 snare drums.

The Tama Steel 14 Starclassic Snare Wire 20 Strand is a high quality snare wire from Tama featuring 20 strands of carbon steel that provides a powerful response and shell sound as well as being incredibly durable and long lasting. Tama have redesigned the angle of the end plates on the wires and made the straps thinner resulting in the optimum response. The end plates are made from bell brass for greater sensitivity. The Tama Starclassic logo is featured on the end plates. These wires are suitable for regular 14 snare drums.

Gain control of your sound. The Tama 14 Ultimate Steel 3mm 10 Lug Mighty Hoops Batter Side allows you to find the perfect tuning for your drum. Designed to fit 14 inch drum shells the ten hoops reduce sustain resulting in a tightly controlled drum sound. The hoop is designed for the batter side of the drum utilising a 3mm steel design suitable as either a replacement or spare part to your drum kit.

Gain control of your sound. The Tama 14 Ultimate Steel 3mm 10 Lug Mighty Hoops Snare Side allows you to find the perfect tuning for your drum. Designed to fit 14 inch drum shells the ten hoops reduce sustain resulting in a tightly controlled drum sound. The hoop is designed for the top side of the drum ensuring a consistent playing surface for you to perform on. This is achieved using a 3mm steel design suitable as either a replacement or spare part to your drum kit.

Round drum chair from Tama. Tama's HT230 throne blends round-style seat comfort with stability and value. Comfort is derived from the amply padded round-shaped seat top, which provides cushioning and comfort for extended performance sessions. Stability is ensured by Tama's double-braced tripod legs and Seat Link throne top/base connection unit, which grips the entire circumference of the seat post and solid rubber feet. Quick and easy height adjustments are achieved by Tama Threaded Rod Height Adjustment system, which allows the throne post to be pulled up into desired height without needing to rotate the spindle.

The Tama First Chair Drum Throne with Saddle Seat is perfect for drummers seeking unmatched comfort and durability. This throne features a saddle seat with a moulded foam cushion that maintains its shape over time ensuring consistent support during long sessions. The 1st Chair height adjustment system combines the precision of a threaded rod with the convenience of a T-bolt making height changes both accurate and quick. Additionally the double-braced legs offer exceptional stability so you can play with confidence.

The Ergo Rider provides absolute ergonomic comfort and support. The hybrid of a round seat and a saddle style seat, it offers the maneuverability of the former, and the playing support of the latter. The front cutaway allows unimpeded thigh movement even during the most rapid double bass patterns. Details:Height adjustable range: 515mm-665mm (20 1/4" – 26 1/8"). Color: Black.
Made in: China

Tama HT730B Ergo-Rider Trio Drum Throne offers a versatile and comfortable design thanks to its ergonomic seat shape. A hybrid of a round seat and a saddle seat it has a front cutaway for unimpeded thigh movement and indentations with extra padding to encourage correct posture. With a tri-leg base and oversized rubber feet for maximum support and stability the Tama HT730B Ergo-Rider Throne features an easily adjustable height range with high-quality Sit Tight seat clamp and Rocklok mechanisms.

The Tama HT530B Wide Rider Trio Drum Throne is a perfect alternative for drummers who prefer the front cutaway style drum seat. This style of seat is ideal for metal drummers or drummers who use a lot of intensive pedal work in their playing. The comfortable design of this drum throne provides a moulded foam cushioned seat designed to retain its shape allowing you to play in comfort. Stability is one of the key features of this drum throne with a strong base of 12mm thick plywood providing extra security and strength to the throne. Combined with the super stabiliser design of this throne it utilises the centre of gravity and double-braced tripod legs to achieve optimum stability. Tama has created …

The Tama HT530BC Wide Rider Trio Drum Throne is a comfortable option for drummers who prefer the front cutaway style. This provides unimpeded thigh movement which can be more comfortable for drummers doing a lot of intensive pedal work. The cloth seat consists of a special fabric that absorbs perspiration preventing drummers from slipping on their stools while playing. The double-braced tri-leg base and oversized rubber feet provide maximum support ensuring your throne stays securely in place.

Transform your snare drum. If youre looking for an injection of powerful traditional tones for your snare Tamas 42 Strand Snappy Snare Wire is the answer. Whether its a restoration project upgrade or time for a refresh the Snappy Snare Wires 42 carbon steel strands provide loose powerful and fat sounds. Compatible with 14" drums their added sensitivity allows your snare to breathe and fully articulate itself with great response - certain to shrine through any musical mix. Its hand-soldered end plates offer increased durability ensuring the wires remain effective for a long time.

The Tama Drum Rug featuring the TAMA 50th Anniversary Logo is a limited edition drum rug designed to commemorate 50 years of Tamas excellence in the music industry. Crafted with durability in mind this rug keeps your drum kit firmly in place allowing you to rock out with confidence. Constructed with a sturdy rubber underside this drum rug provides exceptional traction on any surface ensuring that your kit stays put even during your most enthusiastic performances. No more worries about your drum kit sliding or shifting as you play. In addition to its practicality this drum rug also boasts an original 50th anniversary design adding a touch of class and uniqueness to your drumming setup. With its …

The Tama Accessories Tray is specifically designed to hold your essential drum items leaving them within easy reach. As well as a cup holder this convenient accessory tray features unique grooved edges that accommodate drumsticks. Ever drop a drumstick mid-performance? Well those days are gone. As well as a safe place for drumsticks and drinks the Tama Accessories Tray also comes complete with S-hooks which allow you to hang other small items underneath. Whats more this tray also features a non-slip felt lining which ensures slippy items such as mobile phones will stay in place during a heavy set. Finally this versatile tray also features a 5/8 microphone thread allowing you to attach it to …

This cymbal holder with a pipe diameter of 19.1mm can be attached to stands using either the MC61 or MC62 multi-clamp. The CA30EN is a professional-grade model equipped with a conversion function that allows the boom arm to be stored in the standpipe and also includes the Quick-Set Tilter for convenient and easy set-up. 450 mm (17 3/4 ") length.
Made in: China
Material: Steel

The assortment of boom cymbal holder and Mc61 Multi-ClampBy connecting to stands from 15.9mm to 28.6mm in diameter, you can add any cymbal easily300mm (11 3/4") Length boom cymbal arm
Made in: China
Material: Steel

The Tama CB900AS Accu-Strike Drum Beater is a strong beater built to provide effortless speed and power to your playing arsenal and go hand-in-hand with your Tama Speed Cobra pedal. The strong lightweight design increases your potential for faster strokes with the butadiene rubber material compressing on impact to produce a quick punchy rebound. The surface of the beater head is flat and slightly smaller than usual for a more precise and focused projection. If youre looking to upgrade your speed potential or replace your stock Speed Cobra beater the Tama Accu-Strike is the ideal choice for your kick pedal.

The Power Strike Cobra beater by Tama has a smaller diameter with a longer head than the predecessor. This combination provides more attack than the previous design. Furthermore, Tama has optimized the distance between the striking surface of the beater and the shaft which results in more control during fast parts of songs.
Material: Felt
Made in: China

The Tama CB90F Iron Cobra Beater is a robust kick pedal capable of a quick responsive feel. Featuring a lightweight design it offers rapid response making it perfect for fast-paced drumming. The felt head ensures a softer strike reducing wear on your drumhead and producing a warm tone. While its mainly designed for the Tama Iron Cobra Kick Pedal its compatible with a range of other pedals offering versatile use for any setup. This beater is a solid choice for drummers looking to enhance their performance with precision and speed. Please Note: Kick Pedal NOT included.

The Tama CB90R Iron Cobra Beater is a robust kick pedal capable of a quick responsive feel. Featuring a lightweight design it offers rapid response making it perfect for fast-paced drumming. The rubber head ensures a low-end strike with an intense volume - ideal for metal drumming. While its mainly designed for the Tama Iron Cobra Kick Pedal its compatible with a range of other pedals offering versatile use for any setup. This beater is a solid choice for drummers looking to enhance their performance with precision and speed. Please Note: Kick Pedal NOT included.

The Tama CB90W Iron Cobra Beater is a high-performance adjustable bass drum beater featuring a wooden head with a lightweight design. Tama is renowned for high-quality drum parts and the Iron Cobra is no exception. Featuring high-tech housing material this lightweight beater provides a solid attack perfect for rock and metal or any genre that demands a more distinct attack. Gliding easily through the air to add responsivity to your playing. Ideal for any ability drummer this CB90W is a fantastic way to get more out of your pedal in terms of playability and sound.

The Tama Classic Hardware Pack With Bag is the ideal hardware pack for travelling light and easily between gigs. The pack features two cymbal stands a hi-hat stand and a snare stand. The hi-hat and cymbal stand features a classic flat base design that allows you to position the tripod base much lower and offers positioning in tricky spots that regular tripod stands cannot reach. All the Tama Classic stands feature a compact design for easy storage in the included bag. With the hardware weighing 7.4kg in total the Tama Classic Hardware Pack and bag make life on the road - and on stage convenient and easy.

Cymbal holder that can be built into your setup in combination with multi-clamps and attachments. Bass Drum Mounted Cymbal Holder features telescoping arm & fine gear tilter, which allow you to adjust the angle and height of the cymbal as you like in smaller spaces.
Made in: China
Material: Steel