Drive Cases & Docks

Digitus USB hard drive enclosure, external, NVMe

Digitus USB hard disk enclosure, external, NVMe + SATA

Ports: External: 1 x SuperSpeed USB 10 Gbps (USB 3. 1 Gen 2) USB Type-C female internal: 1 x 67 pin M. 2 key B slot
Supports M. 2 modules in format 2280, 2260 and 2242 with Key B or Key B+M based on SATA
Data transfer rate up to 6 Gbps
LED display for power and access
Short circuit protection, overheating protection. ESD protection up to 2 kV

A new home: Our IB-AC640-C3 external enclosure offers you the perfect solution to upgrade your optical drive from a notebook and transform it into a modern external device.
Flexibility and versatility guaranteed: With our USB combo cable, you are well equipped to connect your SlimLine SATA drive to different devices. Whether USB Type-C or Type-A, you have full control over your connectivity.
Stable and safe: our non-slip rubber feet ensure that the housing is stable and secure at all times. No slipping, no scratches on the desk - you can concentrate fully on your work.
Stylish, timeless and robust: With its simple black design, the case blends harmoniously into any environment. Whether in …

DELOCK CAJA EXTERNA 3.5" SATA HDD MIT SUPERSPEED (USB 3.1 GEN 1)

For 5x 3.5 inch (8.9 cm) hard drives with non-scratch SATA (NSS) and lockable carriers
Aluminium housing with 80 mm fan and temperature alarm (55°C, 60°C or 65°C)
Cool & silent
Stress resistant
HDD trays with lock to prevent accidental and unauthorized access
Supports SATA I/II/III and SAS II up to 6Gbps. capacity unlimited

LogiLink M.2 NGFF (SATA) SSD to 2.5 HDD Enclosure

Made to fitHard drives and SSDs in 2.5 inch format have a height between 7 mm and 15 mm, depending on the storage capacity and model. Especially SSDs are usually particularly flat and have a 7 mm height. However, many installation slots, external hard drive enclosures or PC enclosures are designed only for 9.5mm high drives. An SSD would not sit and wobble safely. For this case, this self-adhesive spacer is intended to increase the height from 7 mm to 9.5 mm.

Sleek design
Versatile functionality
Reliable performance

Backplane for 4x 2, 5 inch SATA or SAS hard drives or SSDs, installation in 1x 5, 25 inch drive bay
Supports SATA III 6 Gbit/s and SAS III 12 Gbit/s as well as hot swap
Robust industrial design made of aluminium and metal, lockable.
Two fans (40 x 40 mm) with alarm for fan interference, status LED for operation and access
Requires 1x Mini SAS HD (SFF-8643) data connection and 1x 15-pin SATA power connection

Connectors: outside: 1 x SATA 22 pin male inside: 1 x SATA 22 pin female (NSS connector)
Suitable for 2.5 inch SATA HDD/SSD: hard drive height up to 12.5 mm SATA HDD/SSD up to 6 GB/s supports 5 V HDD/SSD
Data transfer rate up to 6 GB/s
With special SATA NSS connector internally to protect the SATA port of the hard drive from wear and tear with every change
Hot Swap

Package dimensions (L x W x H): 16.0 cm x 10.2 cm x 3.8 cm
Package weight: 128 g
Number of pack: 1
Country of origin: China

The HSB3SATSASBA Removable 3-drive backplane lets you quickly install and hot-swap 3.5" drives from the front of your computer by turning two 5.25" bays into a hot-swappable interface for you to connect up to three 3.5 SATA or SAS hard drives (HDD).

For added versatility the hard drive bay can interface with SATA I/II/III and SAS I/II hard drives -- an ideal accommodation for enterprise system applications.

For a quick and secure method of installing and removing drives the backplane features ejection levers and a key-lock design. To help prevent drive failure the bay provides excellent heat dissipation with a built-in fan and a vented solid aluminum enclosure.

The HSB3SATSASBA is backed …

Turn almost any 2.5" SATA/SAS drive into a 3.5" drive

This 2.5" to 3.5" hard drive adapter lets you install a 2.5" SATA or SAS hard drive (HDD) or solid-state drive (SSD) into an internal or external 3.5" drive bay using standard drive-mounting holes.

Convert a 2.5" drive into a 3.5" drive

The 2.5" to 3.5" hard drive bay adapter lets you install a newer higher performance drive such as an SSD into a legacy system that may only support a 3.5" hard drive. It provides a cost-efficient way to enhance storage performance and reliability without expensive upgrades to core IT systems. It's also ideal for system administrators who want to build a system that takes advantage of the increased …

Convert Your Nvme & Sata M.2 Drive Into Superfast Portable Drive! Toolessly Install The Drive In The Slot Close The Cover And Connect To Your Device Using The Included Usb Type-C -To Usb Type-C Or Usb Type-C To Usb-A Cables For Highspeed Data Transfer Or To Boot Heavy Programmes That Would Hamper Your Device's Performance.- Included Usb C To Usb C And Usb A To Usb C Cable.- Compatible With 2280/2260/2242/2230 Size Ssd.- Up To 10Gbps Through Usb 3.1 Gen2.- Slim And PortableAdvanced ChipsHigh-Performance Built-In Rtl9210b Master Control Supports Uasp Acceleration And Trim Instruction Giving The Hdd Powerful Performance All The Time.High-Texture ShellThe Shell Is Made Of Aluminium Alloy And Anodic …

SATA Docking Station / External Interface SATA / Internal Interface SATA III / 2.5 Inch

The S352BU33RER 2-Bay RAID enclosure lets you build an external RAID array with two 3.5' SATA hard drives, and connect to your computer through USB 3.0 or eSATA. For fast performance and efficient data transfers, the enclosure supports SATA III transfer speeds -- up to 6 Gbps when connected through eSATA. The versatile RAID enclosure can also be connected through USB 3.0, with support for UASP, performing up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details. The external RAID enclosure features a hardware RAID controller, supporting JBOD, Spanning, RAID 0, and RAID 1 -- to achieve greater drive capacity,…

LogiLink UA0346 storage drive enclosure SSD enclosure Black M.2

LogiLink UA0154 storage drive enclosure 3.5"

Characteristics.-Simple design and very easy installation.-It is an ideal solution for transporting a large amount of information.-Versatility, it is compatible with both IDE and SATA hard drives.Advantages.The minimalist design and high-quality aluminum finishes provide you with an external box that is professional, modern and timeless.Specifications:-USB 2.0:1.-USB connector gender:Female.-USB version:2.0.-USB connection:Yes.-Height:33 mm.-Package height:65 mm.-Package depth:255 mm.-Package width:190 mm.-Package weight:750 g.-Weight:350 g.-Depth:114 mm.-Width:203 mm.-External power adapter:Yes.-Maximum storage capacity:3 TB.-Number of supported storage units:1.-Supported storage disk interfaces:IDE,…

Featured features.-It is a box that provides professionalism, modernity and is very compact.-Very easy opening and installation of the hard drive.Specifications:-USB 2.0:1.-USB connector gender:Female.-USB version:2.0.-USB connection:Yes.-Height:31.5 mm.-Package height:65 mm.-Package depth:255 mm.-Package width:190 mm.-Package weight:820 g.-Weight:250 g.-Depth:175 mm.-Width:117 mm.-External power adapter:Yes.-Maximum storage capacity:3 TB.-Number of supported storage units:1.-Supported storage disk interfaces:SATA, Serial ATA II, Serial ATA III.-Storage unit size:3.5´´.-User manual:Yes.-Stand included:Yes.-Screws included:Yes.-Cables included:USB.-Compatible operating systems:-Windows 98/2000/XP/Vista/7.-M…

Docking Station Double Bay SATA 2.5´´/3.5´´ USB 3.0/3.1 Gen1.Plug & Play device that allows you to clone 2 SATA drives without the need for a computer.You can read and manage the information on your drives while connected to a device through its USB 3.0/3.1 Gen 1 port - Compatible with 2.5/3.5 HDD/SSD ´´ SATA- USB 3.0/3.1 Gen1 connection (compatible with USB 2.0)-Supports cloning of hard drives without the need for a PC- LED read and write indicator, with color sequence depending on the percentage completed during the cloning process- Power via external power adapter - Supports HDD/SSD up to 8TB (between the two bays) - Supported operating systems:Windows/MacOS/Linux - Type of file formats suppor…

Description.Docking Station TQDS-802 is a versatile device that works as a dock to connect up to 2 SATA hard drives to a PC via USB 3.0.It is an ideal solution to clone (duplicate) hard drives and make backup copies.You can clone (duplicate) hard drives without the need for a PC.You can make the backup by pressing a single button.Built-in USB host.(The USB 2.0 HOST is a USB port that works exactly the same as the USB 2.0 ports on your computer and allows you to connect any USB device.) Versatility, it is compatible with 2.5´´ and 3.5´´ SATA hard drives.Specifications:-Number of compatible storage drives:2.-Maximum storage capacity:3 TB.-Storage type:Hard drive.-Storage drive interface:SATA, Ser…

Portable HDD Rack / External Interface SATA / Internal Interface SATA II / 3.5 Inch / Max Hard Drives 2