Bike Accessories

Bike Oil / 15 ml

This innovative and easy to use product will protect you efficiently from mud projections during your most committed races or your winter outings - Easy to put on in less than 2 minutes with 5 clamps provided, it will stay in place - Its flexible structure in a proven material, neoprene, will remain reliable throughout the uses thanks to simple washings in clear water.

Rear / Screws Method of Attachment / Mountain Bike / 26 g / Polypropylene / 26 inch

Features:- Three-dimensionally adjustable- High definition, anti-glare and blast resistant glass- Mounting on handlebar end by internal clampingSpecifications:- Diameter of bracket: 15 - 23 mm- Weight: 141 g- Mounting position: left

Bike Cleaner / Universal / 472 ml

High-resistance frame-protection against impacts and scratches. Features: Easy to install with a powerful adhesive, it resists to ripping, UV light and temperature fluctuations. Transparent and adapted to all frames. Excellent water-resistance. Material: Polyurethane. Size: L. Number of patches: 14. Thickness: 250 microns. Composition: 1 down-tube protection 500 x 58mm, 1 top-tube protection 500 x 58mm, 2 rear base-protection 252 x 25mm, 2 crank protection 105 x 25mm, 4 patches 35 x 25mm and 4 patches Ø 25mm.
Type: Frame Protector
Made in: China

Front

Front

Stan's NoTubes DART Puncture Repair Tool The DART Repair Tool from Stan’s NoTubes is a puncture plug system for tubeless tyres that reacts with the sealant as well as physically blocking the hole in order to form a more effective repair. The DART has a barbed tip that holds it in place rather than relying on a tight fit, and the material used is less damaging to rims and rim tape than some alternatives. No trimming is required and the excess material won’t be felt even when used with high-pressure road tyres. The tool holds four DARTs (two are included with this tool) in a lightweight and ergonomic design which allows for precise application of the plug without any risk of damaging the …

CO2 cartridge-shaped puncture repair kit (including wicks) for better portability.- The kit includes one punch and 2 sets of wicks (5 wicks each set).Features:Material:CNC machined aluminum / stainless steel.Measurements:23 x 87.5 mm.Weight:44 g.Note:- This product is designed for emergency repairs.- For use in punctures of no more than 3 mm on tubeless tyres.- The effectiveness of each repair depends on the type of puncture and the condition of the tire.

##BBB MTBProtector Mudguard Both the front (BFD-13F) and rear (BFD-13R) mudguards from BBB features the TPR mud flap and is constructed from a strong two-tone composite material.

Shimano BB-UN300 68mm Square Taper Bottom Bracket Shimano’s tried and trusted BB-UN300 68mm Bottom Bracket is perfect for traditional square taper chainsets, providing superb reliability and easy installation. The sealed bearings are smooth and durable whilst the narrow body leaves plenty of room within the frame for cable routing.

Specifications:- IceToolz lockring remover M801, Bosch Active- For Bosch® Active / Performance Line- Use with 1/2 Two-way Ratchet Wrench (#53R4)- Material: Cr-Mo steelUnit:- 0.158 kg- 5,1 x 5,1 x 3,7 cmOuter box:- 36 x 21.5 x 42.8 cm- 100- 11.6 kg

This innovative mudguard provides optimal protection for tapered suspension forks. The SHOCKBOARD VARIO is simply mounted on the fork crown in seconds with the use of high quality rubber straps. The angle of the rear part of the SHOCKBOARD VARIO can be adapted to the geometry of your wheel. The form is based on the multiple test winners SHOCKBOARD and SHOCKBLADE and makes full use of the splash guard effect that has been proven for decades.Specifications:- Material: plastic- Weight: 116 g- Wheel size: 26´´, 27,5´´ (650b)´´, 28´´, 29 ´´- Tyre width: 1.75´´-2.5´´- Length front fender: 545 mm

Bike Mirror

SCHWALBE Rim Tape Tubeless To seal conventional wheels for tubeless use application .Easy to use and very high pressure-resistant. A single layer is even enough on road bikes. 10 m long 19mm wide Specifications:- Group: Rim Tape- Size: 10m / 19mm- Primary Base Color: Blue- Type: Tubeless

This chain guide increases chain tension on frames with vertical dropouts and is especially suitable for single-speed use.Features:- Suitable for single-speed hubs- Not suitable for coasterbrake hubs- Mount: Derailleur hangerSpecifications:- Material: Aluminum 6061-T6 CNC

SCHWALBE Rim Tape Tubeless To seal conventional wheels for tubeless use application .Easy to use and very high pressure-resistant. A single layer is even enough on road bikes. 10 m long 19mm wide Specifications:- Group: Rim Tape- Size: 10m / 19mm- Primary Base Color: Blue- Type: Tubeless

The tubeless rim tape is extremely user friendly and at the same time very high pressure resistant. Even on road bikes a single ply of tape is sufficient.

XLC carrier CarryMoreSpecifications: - incl. Switch-button lock- precision welded- incl. rearlight bracket - incl. springclip- with pumphook (240mm), (only 24)- maximale load 25 kg - incl. chainstay adapters - weight 721g (20), 741 (24)- dimensions of carry area: 400x135mm, Ø10mm

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider's personality.The Mount:- What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all).The Look:- The Oi bell's shape originates from its home – the handle bar. Where bells usually protrude up or out, Oi doesn't. It appears to hover around the handle bars. In one sense, it's discreet. B…

Muc-Off E-Bike Drivetrain Tool Maintaining your electric bike needn’t be a hassle - cue the Muc-Off E-Bike Drivetrain Tool. Unlike a standard bike, the crank on electric bikes with crank-based motors can’t spin the chain backwards, making applying lube and cleaning your chain a pain. With its magnetised connection, this unique drivetrain tool fits into the chainring bolts, allowing you to spin the crank and chain backwards. Three different-sized bits ensure compatibility with many chainrings and a silicone sleeve prevents you from scratching your ride.

Allows arresting the button of the racktime adapter and thus securing the accessory on the bike. fits all racktime adapters.Specifications:- Weight: 43 g

Repair Stand Accessory