Bosch 2607019578

It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering ma... moreximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill Bit Ground is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. 18-piece Toughbox metal drill bit set HSS-G, DIN 338, 135° • Drilling with the Maximum Precision • HSS Twist Drill Bit offers solid drilling for standard usage with metal • 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering • Precision-ground bit made of HSS enables fast results • No need to pre-punch or pilot drill up to 10 mm-diameter Specifications: Diameter mm: 1,0; 1,5; 2,0; 2,0; 2,5; 3,0; 3,0; 3,5; 4,0; 4,0; 4,5; 5,0; 5,5; 6,0; 7,0; 8,0; 9,0; 10,0 Working length mm: 12; 18; 24; 24; 30; 33; 33; 39; 43; 43; 47; 52; 57; 57; 69; 75; 81; 87 Total length mm: 34; 40; 49; 49; 57; 61; 61; 70; 75; 75; 80; 86; 93; 93; 109; 117; 125; 133 Set dimension(s) mm: 180,0 x 85,0 x 45 Materials: Ferrous metals Non-ferrous metal Materials in Detail: Steel/ferrous metal Gray iron Alloyed/non-alloyed steel Copper Zinc Alloys Tin Aluminium

Bosch 2607019578 18 Piece HSS-G Metal Drill Bit Set in Tough Box The Bosch 2607019578 is an 18 Piece HSS-G metal drill bit set that comes in a tough box. It is suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm_, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-gro... moreund HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Features: In tough plastic box Self-centring split point drill tip There is no need to pre-punch or pilot drill up to 10mm in diameter Specification: Diameter mm: 1, 1.5, 2x2, 2.5, 2x3, 3.5, 2x4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 Working length: 12, 18, 2x24, 30, 2x33, 39, 2x43, 47, 52, 2x57, 69, 75, 81, 87 Total length: 34, 40, 2x49, 57, 2x61, 70, 2x75, 80, 86, 2x93, 109, 117, 125, 133