Name: Crompton T8 22W 3000K G13 LFT422WW
Brand: Crompton
Price: 79.69999694824219 GBP
Availability: InStock

Buy Crompton T8 22W 3000K G13

When you make a purchase through links on our site, we may earn an affiliate commission.


	Crompton Lamps LED 4ft T8 Tube 22W (10 Pack) Warm White LFT422WW A value pack of 10 retrofit 4ft LED T8 tube light bulbs from Crompton Lamps replaces the mercury and other hazardous material... mores found in fluorescent tubes with modern LED components, making it a much safer, more reliable and more efficient alternative.The tubes linear circuit board is adorned with a series of SMD LED chips that sit within a protective, cylindrical glass shell. This use of glass - rather than plastic - prevents the tube from bending, warping or discolouring over time. Each tube carries a 2-year Lightbulbs Direct warranty as standard, alongside a 5-year manufacturer's warranty.Where a traditional fluorescent tube would use approximately 36W to produce 2310 lumens, these modern LED T8 tubes use just 22W. This, coupled with the light bulbs vastly superior nominal lifetime of 40,000 hours, has the potential to reduce lighting bills by up to 90%. Despite the much-improved performance offered by its LED componentry, it shares the same G13 fitting as the fluorescent tubes its been designed to replace. This makes upgrading incredibly simple and completely removes the need for rewiring of any sort. Simply remove your power-hungry 36W fluorescent tube, replace it with this 22W LED equivalent and you can begin to benefit from substantially reduced lighting costs almost immediately.No warping, no bending. Replaces 36W fluorescent tube but consumes only 22W of power. Supplied in rigid 2mm cardboard tube to minimise risk of transport damage. Not suitable for dimming.Fitted with a standard sized G13 2-pin (13mm apart) caps to both ends.* This LED T8 tube includes an LED starter for direct retrofit into existing battens where starters are used, however Crompton Lamps recommends wiring this light bulb directly to the mains to acheive optimum efficiency. For circuits which have an electronic ballast, Crompton Lamps recommends bypassing the ballast and wiring this light bulb directly to the mains for optimum efficiency. We highly recommend that the installation is carried out by a qualified electrician to ensure the best results. For more installation information please see manufacturers website. LightBulbs-direct.com Delivery: in United Kingdom Report	£79.70 Buy in shop

	Crompton T8 LED Tube Light 4ft 22W (36W Eqv) Warm White Food Safe LFT422WW This 4ft LED replacement tube from Crompton Lamps has been designed throughout to provide a safe, bright alternative to stand... moreard fluorescent T8 tubes that is both easier to install and more energy efficient.The tube employs Surface Mounted Diode (SMD) LED technology to deliver a clean, bright light that illuminates a range of spaces just as capably as existing fluorescent tubes, albeit more efficiently and reliably. The tube's linear circuit board is adorned with a series of LED chips that sit within a protective, cylindrical glass shell. The use of glass - rather than plastic - prevents the tube from bending, warping or discolouring over time.A diffused inner coating disperses the light within an optimal 320 beam angle and removes the need for a separate reflector, or the harmful substances commonly found in fluorescent tubes. Each tube carries a 2 year SimplyLED warranty as standard, alongside a 5 year manufacturer's warranty.Each tube features a single-ended circuit that makes installation as simple and risk free as possible. However, despite this we would still recommend that installation be carried out by a qualified electrician to ensure the best results.Available in 2ft, 3ft, 4ft, 5ft or 6ft T8 lengths, along with a range of Warm White, Cool White or Daylight colour options. SimplyLed.co.uk Delivery: to United Kingdom Report	£14.87 Buy in shop

	Crompton Lamps LED 4ft T8 Tube 22W Shatterproof Food Safe Warm White LFT42 This warm white coloured LED T8 tube light has been coated with a foodsafe protective sleeve/coating which is IEC 61549 compl... moreiant and can also be used for long life lamps is recognisable by a green band. The sleeve encompasses both the tube and the cap (excluding the pins) making it essential for use in environments, such as food preparation or display areas, where you may be concerned about the possible costly consequences that a broken tube could cause.This retrofit 4ft LED T8 tube light bulb from Crompton Lamps replaces the mercury and other hazardous materials found in fluorescent tubes with modern LED components, making it a much safer, more reliable and more efficient alternative.The tubes linear circuit board is adorned with a series of SMD LED chips that sit within a protective, cylindrical glass shell. This use of glass - rather than plastic - prevents the tube from bending, warping or discolouring over time. Each tube carries a 2-year Lightbulbs Direct warranty as standard, alongside a 5-year manufacturer's warranty.Where a traditional fluorescent tube would use approximately 36W to produce 1950 lumens, these modern LED T8 tubes use just 22W. This, coupled with the light bulbs vastly superior nominal lifetime of 40,000 hours, has the potential to reduce lighting bills by up to 90%. Despite the much-improved performance offered by its LED componentry, it shares the same G13 fitting as the fluorescent tubes its been designed to replace. This makes upgrading incredibly simple and completely removes the need for rewiring of any sort. Simply remove your power-hungry 36W fluorescent tube, replace it with this 22W LED equivalent and you can begin to benefit from substantially reduced lighting costs almost immediately.No warping, no bending. Replaces 36W fluorescent tube but consumes only 22W of power. Supplied in rigid 2mm cardboard tube to minimise risk of transport damage. Not suitable for dimming.Fitted with a standard sized G13 2-pin (13mm apart) caps to both ends.* This LED T8 tube includes an LED starter for direct retrofit into existing battens where starters are used, however Crompton Lamps recommends wiring this light bulb directly to the mains to acheive optimum efficiency. For circuits which have an electronic ballast, Crompton Lamps recommends bypassing the ballast and wiring this light bulb directly to the mains for optimum efficiency. We highly recommend that the installation is carried out by a qualified electrician to ensure the best results. For more installation information please see manufacturers website. LightBulbs-direct.com Delivery: in United Kingdom Report	£14.99 Buy in shop

	Crompton Lamps LED 4ft T8 Tube 22W Warm White LFT422WW This retrofit 4ft LED T8 tube light bulb from Crompton Lamps replaces the mercury and other hazardous materials found in fluo... morerescent tubes with modern LED components, making it a much safer, more reliable and more efficient alternative.The tubes linear circuit board is adorned with a series of SMD LED chips that sit within a protective, cylindrical glass shell. This use of glass - rather than plastic - prevents the tube from bending, warping or discolouring over time. Each tube carries a 2-year Lightbulbs Direct warranty as standard, alongside a 5-year manufacturer's warranty.Where a traditional fluorescent tube would use approximately 36W to produce 2310 lumens, these modern LED T8 tubes use just 22W. This, coupled with the light bulbs vastly superior nominal lifetime of 40,000 hours, has the potential to reduce lighting bills by up to 90%. Despite the much-improved performance offered by its LED componentry, it shares the same G13 fitting as the fluorescent tubes its been designed to replace. This makes upgrading incredibly simple and completely removes the need for rewiring of any sort. Simply remove your power-hungry 36W fluorescent tube, replace it with this 22W LED equivalent and you can begin to benefit from substantially reduced lighting costs almost immediately.No warping, no bending. Replaces 36W fluorescent tube but consumes only 22W of power. Supplied in rigid 2mm cardboard tube to minimise risk of transport damage. Not suitable for dimming.Fitted with a standard sized G13 2-pin (13mm apart) caps to both ends.* This LED T8 tube includes an LED starter for direct retrofit into existing battens where starters are used, however Crompton Lamps recommends wiring this light bulb directly to the mains to acheive optimum efficiency. For circuits which have an electronic ballast, Crompton Lamps recommends bypassing the ballast and wiring this light bulb directly to the mains for optimum efficiency. We highly recommend that the installation is carried out by a qualified electrician to ensure the best results. For more installation information please see manufacturers website. LightBulbs-direct.com Delivery: in United Kingdom Report	£8.39 Buy in shop

	Crompton Lamps LED 4ft T8 Tube 22W Shatterproof Warm White LFT422WW-S This warm white coloured LED T8 tube light has been coated with our shatterproof protective sleeve/coating which is IEC 61549... morecompliant and is identified with a dual green band. The sleeve encompasses the tube making it essential for use in environments where you may be concerned about the possible costly consequences that a broken tube could cause.This 4ft LED T8 tube light bulb from Crompton Lamps replaces the mercury and other hazardous materials found in compact fluorescent tubes with modern LED components, making it a much safer, more reliable and more efficient alternative.The tubes linear circuit board is adorned with a series of SMD LED chips that sit within a protective, cylindrical glass shell. This use of glass - rather than plastic - prevents the tube from bending, warping or discolouring over time.The tube itself uses just 22W but delivers the same light output as a 36W compact fluorescent tube, within an optimal 320 beam angle. Despite the much improved performance offered by its LED componentry, it shares the same G13 fitting as the fluorescent tubes its been designed to replace. This makes upgrading incredibly simple and completely removes the need for rewiring of any sort. Simply remove your power hungry 36W fluorescent tube, replace it with this 22W LED equivalent and you can begin to benefit from substantially reduced lighting costs almost immediately.Fitted with a standard sized G13 2-pin (13mm apart) caps to both ends.No warping, no bending. Replaces 36W fluorescent tube but consumes only 22W of power. Supplied in rigid 2mm cardboard tube to minimise risk of transport damage. Not suitable for dimming.Crompton Lamps recommends wiring this light bulb directly to the mains for optimum efficiency. LightBulbs-direct.com Delivery: in United Kingdom Report	£10.42 Buy in shop


Crompton T8 9W 3000K G13	from £5.97	5 offers
Crompton T8 9W 4000K G13	from £5.33	5 offers
Crompton T8 9W 6500K G13	from £5.33	4 offers
Crompton T8 14W 3000K G13	from £68.00	4 offers
Crompton T8 14W 4000K G13	from £68.00	4 offers
Crompton T8 14W 6500K G13	from £68.00	3 offers
Crompton T8 22W 3000K G13	from £79.00	5 offers
Crompton T8 22W 4000K G13	from £79.00	4 offers
Crompton T8 22W 6500K G13	from £8.39	4 offers
Crompton T8 24W 3000K G13	from £10.99	4 offers
Crompton T8 24W 4000K G13	from £104.00	5 offers
Crompton T8 24W 6500K G13	from £10.99	5 offers
Crompton T8 28W 4000K G13	from £15.43	7 offers
Crompton T8 28W 6500K G13	from £162.00	3 offers

Crompton T8 22W 3000K G13 (LFT422WW)

Buy Crompton T8 22W 3000K G13

Crompton Lamps LED 4ft T8 Tube 22W (10 Pack) Warm White LFT422WW

Crompton T8 LED Tube Light 4ft 22W (36W Eqv) Warm White Food Safe LFT422WW

Crompton Lamps LED 4ft T8 Tube 22W Shatterproof Food Safe Warm White LFT42

Crompton Lamps LED 4ft T8 Tube 22W Warm White LFT422WW

Crompton Lamps LED 4ft T8 Tube 22W Shatterproof Warm White LFT422WW-S

Crompton T8 22W 3000K G13 configurations