Information in model description is for reference purposes. Before buying always check characteristics and configuration of product with online store manager Catalog Draper 2024 - new products, best sales and most actual models Draper.
When you make a purchase through links on our site, we may earn an affiliate commission.
Draper 315mm 740W 230V Two Wheel Bandsaw 84714
Designed for workshop use, a bandsaw with excellent performance and cutting capacity. Fitted with the following features incl... moreuding an LED flexible work light, upper and lower door micro switches, dust collection tray, quick release blade tensioner and upper and lower blade bearing guides. Attached with a fine ground table, with tilting between 0-45 enabling straight cross cutting, ripping, mitre and bevel cutting. It can be either bench mounted or fitted to a stand (available separately). The machine is supplied with a mitre gauge, rip fence and dust extraction outlet. A bandsaw designed for the workshop and keen DIYer use.No-volt switch
This two-speed bandsaw is designed to cut wood, wood derived materials and plastics. Built to a high specification and ideal... morefor trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately (Stock No. 84718). Features and Benefits • Two-speed operation control • Adjustable blade tensioning and tracking for precise cutting • Mitre guide for crosscut work. Graduated to 30 degrees for both left and right hand angles • Table tilting with 0-45 degree range • Fitted with LED worklight and convenient tool drawer in base unit • 0-45° table tilting feature • For angled cutting, ripping, mitre and bevel cutting • Fitted with a cable and approved plug • Supplied with blade, mitre gauge, rip fence and dust extraction outlet • Can be bench mounted or fitted to a stand (available separately) Specifications Voltage: 230V Frequency: 50Hz Input: 750W No load speed: 1400rpm Maximum throat capacity: 305mm Cutting depth: 165mm Maximum capacity: 172mm Cutting speed: 2 speed, 6.16m/sec (370m/min) and 13.33m/sec (800m/min) Table size: 390 x 480mm (Tilt to 45 degrees) Bandsaw dimensions: 750 x 520 x 1170mm Weight: 57kg Contents 1 x 4tpi blade 1 x Parallel rip fence 1 x Open ended spanner 1 x Push stick 4 x Hex keys 4 x Pan head screw, M7 x 12mm 4 x Washers, 8.5mm 4 x Plastic wing bolts
This two-speed bandsaw is designed to cut wood, wood derived materials and plastics. Built to a high specification and ideal... morefor trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately (Stock No. 84718). Features and Benefits • Two-speed operation control • Adjustable blade tensioning and tracking for precise cutting • Mitre guide for crosscut work. Graduated to 30 degrees for both left and right hand angles • Table tilting with 0-45 degree range • Fitted with LED worklight and convenient tool drawer in base unit • 0-45° table tilting feature • For angled cutting, ripping, mitre and bevel cutting • Fitted with a cable and approved plug • Supplied with blade, mitre gauge, rip fence and dust extraction outlet • Can be bench mounted or fitted to a stand (available separately) Specifications Voltage: 230V Frequency: 50Hz Input: 750W No load speed: 1400rpm Maximum throat capacity: 305mm Cutting depth: 165mm Maximum capacity: 172mm Cutting speed: 2 speed, 6.16m/sec (370m/min) and 13.33m/sec (800m/min) Table size: 390 x 480mm (Tilt to 45 degrees) Bandsaw dimensions: 750 x 520 x 1170mm Weight: 57kg Contents 1 x 4tpi blade 1 x Parallel rip fence 1 x Open ended spanner 1 x Push stick 4 x Hex keys 4 x Pan head screw, M7 x 12mm 4 x Washers, 8.5mm 4 x Plastic wing bolts
This two-speed bandsaw is designed to cut wood, wood-derived materials and plastics. Built to a high specification and ideal... morefor trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately (Stock No. 84718).
This two–speed bandsaw is designed to cut wood, wood–derived materials and plastics. Built to a high specificatio... moren and ideal for trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0–45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No–volt release switch prevents uncontrolled blade to re–start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately. Features and Benefits This two–speed bandsaw is designed to cut wood, wood–derived materials and plastics. Built to a high specification and ideal for trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0–45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No–volt release switch prevents uncontrolled blade to re–start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately. Features and Benefits Precise Cutting – The adjustable blade tensioning and tracking allow for the perfect cut every time Mitre guide for crosscut work – Graduated to 30 degrees for both left and right hand angles Versatile – The Two–speed Bandsaw does angled cutting, ripping, as well as mitre and bevel cutting Specifications Two–speed operation control Fitted with cable and approved plug Colour: Silver Weight: 57kg Dimensions: H124 x W53 x D43cm Power: 750W What’s Included Saw Blade Mitre gauge Rip fence Dust extraction outlet Bandsaw #html-body [data-pb-style="60FF6AB43400A"]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}#html-body [data-pb-style="60FF6AB434028"]{border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}
This two-speed bandsaw is designed to cut wood, wood-derived materials and plastics. Built to a high specification and ideal... morefor trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4 tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately.Features and Benefits. Precise Cutting - The adjustable blade tensioning and tracking allow for the perfect cut every time. Mitre guide for crosscut work - Graduated to 30 degrees for both left and right hand angles. Versatile - The Two-speed Bandsaw does angled cutting, ripping, as well as mitre and bevel cuttingSpecifications. Two-speed operation control. Fitted with cable and approved plug. Colour: Silver. Weight: 57kg. Dimensions: H124 x W53 x D43cm. Power: 750W
Draper Draper BS305 750W 305mm Two Wheel Bandsaw (230V)
The Draper 84714 is a bandsaw designed for workshop use and it benefits from excellent performance and cutting capacity. This... moremodel is fitted with a LED flexible work light, upper and lower door micro switches, dust collection tray, quick release blade tensioner and upper and lower blade bearing guides for added ease of use. This two wheel bandsaw can also be attached to a stand (available separately) or bench mounted for added convenience, and has the ability to be tilted between 0-45°, enabling straight cross cutting, ripping, mitre and bevel cutting. The 84714 comes supplied with a mitre gauge, rip fence and dust extraction outlet.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.
