Fieldmann FDW 201402-E
 | Outdated Product £80.56 Max. pressure (bar): 105; Power (W): 1400; Working flow (L/h): 396; Inlet temperature: 60; HP hose length (m): 3; Accessories: fan-shaped; water suction; overheat protection; Power source: mains (230 V); Power cord length (m): 5; Dimensions (cm): 19.5x20x42; Weight (kg): 5.6; |
 |
Fieldmann FDW 201402-E 2022water suction | |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Fieldmann 2024 - new products, best sales and most actual models Fieldmann.
Low-cost partner in the fight against dirt
The Fieldmann FDW 201402-E is a compact high pressure washer. It is equipped with a 1400 W motor and a pump that can generate pressure up to 105 bar. To adjust the jet pressure at the outlet, a swivel tip on the rod is used. If you turn it to one side, you can get the most powerful "thread" jet (similar to that created by the dot nozzle on other mini-sinks). If you turn the tip in the other direction, you can get a wide jet with less pressure. An angle of 20° is considered optimal for washing, while wider angles are used for rinsing, since with a wide jet the pressure is significantly reduced (up to 70 bar at a minimum).
Very great opportunities
The Fieldmann FDW 201402-E minisink can be operated from a water supply system, a pump or a container. It is important to consider that it consumes 396 l / h of water, so the volume of the container should be sufficient in order to complete tasks such as washing a car or cleaning a carpet. The unit is equipped with a 5 meter electrical cable and a 3 meter hose, but it is recommended to purchase a longer high pressure hose. The main advantage of this minisink is the possibility of using hot water. Its pump, hose and pipes are capable of operating at temperatures up to 60 ° C, and in case of overheating, the motor automatically turns off.
