United Kingdom
Catalog   /   Computing   /   Components   /   Computer Cases   /   HYTE

HYTE Y60 black (CS-HYTE-Y60-B)

Photos - Computer Case HYTE Y60 black
Videos 10Photos 9
HYTE Y60 black
Chassis Form Factor:Midi Tower
Motherboard size:E-ATX
PSU power:no PSU
Internal bays 2.5":4
Front panel:USB A 1, USB C 1

An enlarged body with an aquarium facade without frames or partitions, allowing you to freely inspect the chassis. To increase the decorative value, the platform comes with a pre-installed PCI 4.0 riser, thanks to which you can orient the video card vertically. Air exchange is organized in the direction from bottom to top and back. The sidewall behind the system board tray has continuous perforation, which significantly increases the efficiency of thermal regulation.

The lower section has a low-speed 120 mm fan on hydrodynamic bearings. Another turntable from the same series is installed at the rear. The HYTE Y60 computer case is designed for assembling a PC based on an E-ATX motherboard. Behind the motherboard tray there is a technical compartment in which the power supply is mounted. Additionally, there are two external 3.5″ HDD slots with quick-release slides that provide hot-swappable memory drives. Instead of the HDD cage, you can use an auxiliary power supply. Inside the platform there are four mounting pads for 2.5″ SSDs. This case is available in different color variations: black, white, black and white, black and red, and several multi-color anime-style colors.

All  specifications

Buy HYTE Y60 black

When you make a purchase through links on our site, we may earn an affiliate commission.

HYTE HYTE Y60 Dual Chamber Mid-Tower ATX Case - Black CS-HYTE-Y60-B

Elevate your aesthetic with the HYTE Y60 Mid-Tower Case. This ATX case utilises three tempered glass panels, providing an uninterrupted, panoramic view of the interior. You can truly show off your high-end gaming hardware, thanks to the vertical GPU mount and included PCIe 4.0 riser cable. Plus, with three pre-installed Flow FE12 fans and cold floo... morer cooling, this case will keep your gaming PC at optimum temperatures. With “crown moulding” along the top and bottom of the chassis, the HYTE Y60 is a stylish addition to your gaming set-up. HYTE Y60 Dual-Chamber Mid-Tower PC Case at a Glance: ATX case with bezel-less 3-piece panoramic tempered glass panelling PCIe 4.0 riser cable included for vertical GPU mounting Protective riser cable canopy for half-height PCIe cards behind vertical GPU Cold floor cooling utilising sweeping vents – eliminates hot spots Three pre-installed Flow FE12 fans on floor and rear of case Dual-chamber design for intelligent cable management Modern Aesthetics With your gaming PC inside a HYTE Y60 PC Case, you can achieve the peak modern aesthetic. The three-piece glass panelling offers a panoramic view of all your high-end hardware, with no bezels or framework interrupting their glory. What’s more, the intelligent interior layout makes it seem like your components are floating, for that extra touch of style. The HYTE Y60 is available in four stunning colourways: Black, White, Red, and Snow White. This model is Black, with both the exterior and interior featuring a matte black finish. A seamless addition to any gaming set-up. Built to Showcase As a showcase chassis, the HYTE Y60 has extensive support for a wide range of components, enabling you to build your dream PC. The backplate can accommodate Mini-ITX, Micro-ATX, ATX, and even E-ATX motherboards, with three full and seven half-height expansion slots for all your PCIe devices. Included within the scope of delivery is a PCIe 4.0 riser cable that allows you to vertically mount your GPU and features a protective canopy so you can mount half-height PCIe cards behind the GPU. There is 375mm clearance for graphics cards, at a maximum thickness of 75mm, though 60mm is recommended for the best cooling potential. To power your gaming PC, the HYTE Y60 has space for ATX power supplies, up to 235mm in length. Facilitating flexible storage, this chassis can hold either two 3.5” HDDs or four 2.5” SSDs. Cooler Than a Partly Cloudy Day with a Light Breeze The HYTE Y60 PC Case has been optimised to provide excellent cooling. To eliminate hot spots, it features cold floor cooling, with sweeping lateral vents integrated in the bottom of the chassis. Plus, with extensive ventilation throughout the frame and three pre-installed 120mm fans, the HYTE Y60 has a unique airflow path that will provide ample cooling to a wide variety of components. The featured fans are Flow FE12 fans, that
Overclockers.co.uk
Delivery: to United Kingdom
Report
£199.99

HYTE Y60 Midi Tower Black CS-HYTE-Y60-B

Panoramic Views No corner pillar. The Y60 features a 3-piece panoramic tempered glass design for the ultimate photo and display potential. See your build the way it was meant to be seen from the left or right side of your desk with a simple turn. Exclusively Vertical GPU Mounted Why would you want to see your graphics card any other way? In... morecluded PCIE 4.0 Riser Cable A protective riser cable canopy integrates beautifully into the case allowing for half-height PCIE cards behind the throne of the vertical graphics card. The protective shroud is the first of its kind made specifically for the Y60. Antechamber Construction Segment cables from thermal components and turn your PC into a work of art. Cold Floor Cooling Eliminate hot spots with sweeping lateral vents from fans tastefully tucked into the basement of the Y60. Included Fans The three pre-installed Flow FE12 fans with fluid-dynamic bearings provide whisper-quiet operation.
Quzo.net
Delivery: to United Kingdom
Report
£175.73

HYTE Y60 E-ATX Mid-Tower PC Case - Black, Black

Today's gaming PCs are basically art. To showcase your fancy RGB build, this HYTE chassis has three-piece panoramic tempered glass window, so you'll see your precious components from any angle. And you can make your graphics card the aesthetic centrepiece. The PCIe riser makes a perfect throne for your priciest part - you can place it vertically so... moreit can shine in its full glory rather than being tucked under the motherboard. Besides the looks, this is a very functional case too - expect great airflow and tons of cooling options. Good to know - There are two separate chambers so you can keep the PSU and cables tucked in the back for a neat setup- You can choose between air or liquid cooling, the case's even ready for a custom loop- To keep your build clean and breathable there are dust filters at the top, side and bottom
Currys.co.uk
Delivery: to United Kingdom
Report
£199.00

Hyte Hyte Y60 Black

Midi Tower / Fan (pre-installed) 3 / Motherboard E-ATX / Slots 9 / max. CPU Fan Height 160 mm / Max. Graphics Card Length 375 mm
Idealo.co.uk
Delivery: in United Kingdom
Report
£171.99
Video reviews

HYTE Y60 configurations

Price for HYTE Y60
HYTE Y60 blackfrom £171.994 offers
HYTE Y60 redfrom £165.999 offers
HYTE Y60 whitefrom £173.998 offers
HYTE Y60 whitefrom £174.9910 offers
Filters