Inter-Tech black (88881240)

An infinity mirror in the front illuminated by RGB LEDs, an RGB LED strip in the power supply tunnel and three 120mm RGB fans make the X-908 Infini2 a real eye-catcher. The front made of tempered glass and the side panel made of 4mm thick tempered glass give a generous insight on strong effects and colors, which can be managed by a switch on the fr... moreont or via the 5V RGB header connector (addressable RGB LEDs).The control panel of the X-908 Infini2 is equipped with HD-Audio jacks, two USB 3.0 Type A and two additional USB 3.0 Type C ports and is easy to reach. Two separate switches provide the option of manual fan control in three levels (Low, High or Stop). The power and reset switches are slightly recessed, preventing accidental operation in the dark.The infinity mirror is set in scence through the tempered glass of the front panel, offering insights into the depths of the optical illusion. Another highlight is the 4mm thick tempered glass side panel, which additionally highlights the built-in hardware. Through the side-mounted RGB LED switch all the pre-programmed effects and colors can be switched easily and conveniently. With the 3-pin RGB header connector for 5V RGB motherboard controls and matching motherboard software, the RGB LEDs can be controlled (addressable RGB LEDs).In the top of the case is a large-area dust filter, which protects the interior of the case from dust. With two simple clicks, the dust filter is removed and can be cleaned easily and quickly.Three standard mounted 120mm RGB LED fans not only skilfully show off the interior, they also ensure clean and cool air for the installed components. The effects of the fans can be controlled via the built-in RGB LED switch or the 3-pin RGB header connector for 5V RGB motherboard controls, synchronous with the RGB LEDs in the front and in the power supply tunnel.Behind the motherboard carrier is the heart of the X-908 Infini2 - the RGB / PWM board. Over the board, all built-in RGB LEDs, such as the RGB LEDs of the fans, the RGB LEDs of the LED strip above the power supply tunnel or the RGB LEDs of the infinity front panel, will be synchronously controlled. In addition, up to five 3-pin fans can be connected there, which can be all speed-controlled via the PWM connection of the mainboard. Two slots for 2.5´´ SSDs find their place on the back of the mainboard tray.Specifications:Size:- Form factor: eATX, ATX, μATX, ITX- Dimensions (h/w/d): 530 x 210 x 510mmInstallation Dimensions:- Height CPU cooler (max.): 160mm- Length graphics card (max.): 420mmDrive Bays:- 3.5´´ internal: 3x¹- 2.5´´ internal: 6x¹Front Connectors:- USB 3.0: 2x- USB 3.0 Type C: 2x- Microphone: 1x- Headphones: 1xFan Mounting Option:- Front: 3x 120mm (optional)- Top: 2x 140mm or 3x 120mm (2x 120mm serial, RGB, 3pin-connector)- Rear: 1x 120mm (serial, RGB, 3pin-connector)Scope of delivery:- Case- Retail packaging- Screw set- RGB sync cable- Adapter USB 3.0 to USB 2.0, internal- Graphics cards bracket- Manual

Midi Tower / Fan (pre-installed) 3 / Motherboard E-ATX / Slots 7 / max. CPU Fan Height 160 mm / Max. Graphics Card Length 420 mm