Shimano Baitrunner 6000OC (BTR6000OC)

The new Baitrunner OC gives you the confidence of a legendary drivetrain and auto-return Baitrunner feature as well as better castability, better line lay, less backlash, wind knots or tangles, less friction on the line, larger, more comfortable grips, a higher max drag as well as a wider range of Baitrunner settings than its predecessors. Specific... moreations:- Series: Baitrunner- Bearings: 3 +1- Key Feature: Varispeed Oscillation- Retrieve Per Crank Range (in): 28-36- Family Type: Saltwater Spinning- Maximum Drag (lb): 15-25 (lb)- Models: 3- Retrieve: Reversible- Gear Ratio: 4.4:1- Line Capacity Mono Lbs/yds: 12/550, 16/350, 20/265- Power Pro Lb/yds: 50/505, 65/310, 80/230- Weight: 29.1 Ounce, Lineretrieve Per Crank 37 Inch- Bearings: 3 S ArbTechnology:S A-RB:- These bearings have been through the same process as our A-RB bearings, but feature shields on both sides of the bearings that reduce the possibility of salt or sand inhibiting the bearing´s rotation.Dyna-Balance:- This feature eliminates wobble during the retrieve by counter balancing the rotor to enhance sensitivity and smoothness. By using computer balancing, an approach similar to car tire balancing, we are able to redistribute the rotor weight to create smooth rotation and eliminate vibrations.Fluidrive II:- Building upon the successes of Fluidrive, Fluidrive II features a large master gear polished using a wrapping process, increasing the efficiency of the retrieve.Propulsion Line Management System:- The most obvious component of the Propulsion Line Management System is the new Propulsion spool lip design. Through tens of thousands of casting tests and computer simulations it has been determined that this new spool lip design provides longer casting distances than a standard spool lip design while preventing backlashes and wind knots from forming.Super Stopper II:- Super Stopper II anti-reverse uses a one-way roller bearing that eliminates back-play. This provides the angler with instant hook setting power.Varispeed:- Normal oscillation systems use a constant rotation of the oscillation gear that, when translated to the cam, provides an inconsistent spool speed. This results in line lay that stacks at either end of the spool. By using an oval oscillation gear, we are able to alter the speed of the oscillation cam to provide a consistent spool speed. This results in an even line lay that provides excellent castability and manageability.