Vision TM-1200

Vision TM 1200 is a universal projector ceiling mounting bracket designed to fit 99 of all small to medium sized data projectors safety and sturdily to a ceiling. The Vision TM 1200 can be quickly assembly into a number of different configurations, including flush mount where the projector is as close to the ceiling as possible. The TM 1200 project... moreor mount pole has greater rigidity than a telescopic mount and it can be cut it to length on site so it has an infinitely variable length. A 1m male to female projector mount extension pole is available which can be daisy chained. Order Code: TM 1200 EXT1M Sloping Ceilings? No Problem! The Vision TM 1200 projector mounting solution comes with a tilting mechanism which tilts the projector to a full 90 degrees, allowing you to use the bracket as a projector boom arm if need be. Safety Approved In line with best practice the Vision Techmount TM 1200 projector mount comes with a safety fall arrest tether which can be used to secure the projector to the bracket. Independent testing on calibrated test equipment measured a breaking strain of half a ton! Vision recommend a maximum safe working load of 10kg which is well within the limits of the TM 1200 Projector mounting solution. Easy fit Fitting the Vision TM 1200 universal projector spider bracket to the projector is simple, most projectors have threaded inserts in the bottom of the projector for attaching to a projector bracket or mount . Not all projectors use the same diameter screws so Vision provide a selection to suit almost all projectors. Simply adjust the arms on our universal projector mounting spider bracket over the mounting holes of the projector, and insert a screw into the projector base. Obstruction free Cable Management Rather than having a bolt that runs through the pipe, restricting cable access. The Vision TM1200 projector mounting bracket uses a unique quad bolt chute through system which leaves cable access clear to prevent snagging. Tools Included The Vision TM1200 projector mount bracket comes completes with a spanner and pin hex keys. The only tool you ll need is a hacksaw or 2 pipe cutter (ask your tool supplier for a cutter with a 6 67mm range, and a metal file). Vision have also included with the projector mount pole a drilling jig so that you can easily and accurately drill 9mm holes into the projector pole. Quick release mechanisms make life easier for thieves, so the Vision Techmount TM 1200 projector mount features pin hex key security bolts. Finish the job properly! Enhance aesthetics with the retro fit trim disk which can be installed after the projector is mounted to the ceiling, ideal for false ceiling environments and through plasterboard ceilings to properly finish off the projector installation. BOX DIMENSIONS: 1300 x 160 x 90mm PACKAGED WEIGHT: 6kg SAFE WORKING LOAD: 10kg COLOUR: Satin White ACCESSORIES INCLUDED: 1 x H50 Pin Hex key 1 x 17mm Spanner 4 x M3 43mm screws 4 x M4 43mm screws 4 x M5 43mm screws 4 x M6 43mm