United Kingdom
Catalog   /   Computing   /   Components   /   Graphics Cards

Comparison Palit GeForce RTX 3060 Ti Dual OC V1 LHR vs MSI GeForce RTX 3060 Ti GAMING Z TRIO 8G LHR

Add to comparison
Palit GeForce RTX 3060 Ti Dual OC V1 LHR
MSI GeForce RTX 3060 Ti GAMING Z TRIO 8G LHR
Palit GeForce RTX 3060 Ti Dual OC V1 LHRMSI GeForce RTX 3060 Ti GAMING Z TRIO 8G LHR
from £542.99 
Outdated Product
Compare prices 1
TOP sellers
InterfacePCI-E v4.0PCI-E v4.0
LHR (low hash rate)
GPU
GPU model
NVIDIA GeForce RTX 3060 Ti /LHR/
NVIDIA GeForce RTX 3060 Ti /LHR/
ArchitectureAmpereAmpere
Memory size8 GB8 GB
Memory typeGDDR6GDDR6
Memory bus256 bit256 bit
GPU clock speed1695 MHz1845 MHz
Memory clock14000 MHz14000 MHz
Lithography8 nm8 nm
Max. resolution7680x4320 px7680x4320 px
Passmark G3D Mark19523 score(s)19523 score(s)
Connections
HDMI11
HDMI versionv.2.1v.2.1
DisplayPort33
DisplayPort versionv.1.4av.1.4a
Software
DirectX12 Ultimate12 Ultimate
OpenGL4.64.6
VR
Stream processors48644864
General
Monitors connection44
Coolingactive (fan)active (fan)
Fans23
Lighting
Lighting syncMSI Mystic Light Sync
Power consumption200 W240 W
Additional power8 pin8 + 8 pin
Minimum PSU recommendation550 W600 W
Number of slots22.5
Length
247 mm /247x120x40/
323 mm /323x140x56/
Added to E-Catalogjuly 2021july 2021

GPU clock speed

The frequency of the graphics processor of the graphics card. As a general rule, the higher the frequency of the GPU, the higher the performance of the graphics card, but this parameter is not the only one — a lot also depends on the design features of the graphics card, in particular, the type and amount of video memory (see the relevant glossary items). As a result, it is not unusual for a model with a lower processor frequency to be more performant of two video cards. In addition, it should be noted that high-frequency processors also have high heat dissipation, which requires the use of powerful cooling systems.

Fans

The number of individual fans provided in the graphics card cooling system (if any, see "Cooling").

In general, the more powerful the video adapter, the more efficient cooling it needs. So one fan is typical mainly for devices of the initial and inexpensive middle class, two — from medium to advanced, and three or more are almost an unambiguous sign of a premium-level solution. At the same time, there is no strict dependence here, and models with similar characteristics may have a different number of fans (especially since the cooling efficiency is determined not only by the number of fans, but also by their diameter). But what this parameter unambiguously affects is the length of the graphics card and, accordingly, the amount of space required to install it.

Lighting sync

Backlight synchronization technology provided in a graphics card with an associated design.

By itself, synchronization allows you to "match" the backlight of the graphics card with the backlight of other system components — the motherboard, case, keyboard, mouse, etc. Thanks to this matching, all components can change colour synchronously, turn on / off at the same time, etc. Specific features the operation of such backlighting depends on the synchronization technology used, and, usually, each manufacturer has its own (Mystic Light Sync for MSI, RGB Fusion for Gigabyte, etc.). The compatibility of the components also depends on this: they must all support the same technology. So the easiest way to achieve backlight compatibility is to collect components from the same manufacturer.

Power consumption

Maximum power consumed by the graphics card during operation. This parameter is important for calculating the total power consumed by the entire system and selecting a power supply that provides the appropriate power.

Additional power

Format of additional power required for the operation of the graphics card.

By itself, the PCI-E connector, which is standardly used to connect video cards, provides 75 watts of power. For many models, even quite performant ones, this is quite enough, and many modern video adapters do without additional power. However, models with additional power have become more widespread, especially among high-end solutions.

The simplest version of such a power supply is one 6-pin or 8-pin connector. A 6-pin connector can additionally provide up to 75 watts, an 8-pin connector can provide up to 150 watts. However, for high-end solutions, one connector is not enough, so there are models with 6 + 8 pin, 8 + 8 pin, and even 8 + 8 + 6 pin or 8 + 8 + 8 pin formats.And the new cards are completely 16-pin. Such power connectors have a total of 16 lines: 12 for current supply and 4 signal. The effective power threshold of the 16 pin connector is up to 600 watts. Connection to it can be done through a 3×8 pin adapter.

Note that it is theoretically possible to connect a 6-pin power supply to an 8-pin connector and vice versa, even corresponding adapters are availa...ble for this. However, in fact, the possibility of such a connection should be clarified separately, and such tricks should be used only in extreme cases, when other options are not available.

Minimum PSU recommendation

The smallest power supply recommended for a computer with this graphics card.

This parameter, usually, is much higher than the power consumption of the graphics card itself. This is natural — after all, the PSU must provide electricity to the entire system, not just the video adapter. At the same time, the higher the power of the graphics card, the inevitably higher the power consumption of the PC as a whole. Moreover, this is due not only to the “voracity” of the graphics adapter itself, but also to the consumption of other PC components: a high-end graphics card, usually, is combined with an equally powerful (and energy-intensive) system.

With this in mind, manufacturers indicate the minimum recommended power supply. Of course, such recommendations are not mandatory; however, when using a PSU with a power lower than the recommended one, the probability of malfunctions increases significantly — to the point that even a very limited system may simply “not start”.

Number of slots

The number of slots occupied by the graphics card on the back of the system unit.

This indicator allows you to estimate the amount of space required to install a video adapter. It is relevant in the light of the fact that modern video cards can have a fairly extensive set of connectors, and for this set there has long been little standard lanyard for 1 slot. This is especially true for powerful performant models. Thus, many solutions, especially mid-range and top-end ones, occupy two or even three slots at once.

Separately, it is worth touching on models for which the characteristics indicate a fractional number of slots — usually 2.5 or 2.7. This detail is provided by the manufacturer for promotional purposes — as confirmation that the graphics card is smaller than a full-fledged 3-slot solution. However, in fact there is no difference between these options: adapters for 2.5 or 2.7 slots still block the third slot (albeit partially), making it unusable.

Length

The total length of the graphics card.

In this case, the length means the size of the device from the plate with connectors (which is attached to the back wall of the system unit) to the opposite side. The plate itself and the outwardly protruding connectors are usually not taken into account.

Data on the length of the graphics card is needed primarily in order to assess whether there is enough space for it in a particular case. In addition, longer boards, usually, have more advanced characteristics (although there is no hard dependence here, and video adapters of similar class may have different lengths). As for specific values, the most compact solutions nowadays have a size of 150 – 200 mm or less ; an indicator of 200 – 250 mm can still be considered relatively small, 250 – 290 mm — medium, and many models (mostly advanced) have a length of more than 290 mm.
Palit GeForce RTX 3060 Ti Dual OC V1 LHR often compared
MSI GeForce RTX 3060 Ti GAMING Z TRIO 8G LHR often compared