Comparison Asus ROG Spatha X vs Asus ROG Spatha

The length of the cable that is equipped with a mouse with the possibility of a wired connection (see "Type of connection").

When choosing this parameter, you should first of all take into account the distance from the manipulator to the connection port: a cable that is too short may simply not reach the connector, and a cable that is too long may get tangled at hand and create inconvenience. As for specific values, the most modest wire length in modern mice is 1 m or less ; such devices are intended mainly for laptops. Most desktop manipulators come with cables that are 1.1-1.5m or 1.6-2m long, with some models running longer than 2m.

The range of the wireless connection provided in the mouse (see "Connection Type").

Almost all modern wireless models work confidently at a distance of at least 2 – 3 metres. So you need to pay attention to this parameter mainly when you plan to use the mouse at a greater distance from the computer — for example, when working with a projector at a presentation. At the same time, when evaluating the range, note that it is indicated for perfect conditions: the absence of interference and obstacles in the signal path, the full charge of the battery in the mouse, etc. In fact, the communication range may be somewhat less, so when choosing, it is worth taking a certain stock. Nevertheless, according to the claimed range, it is quite possible to evaluate the practical capabilities of different models and compare them with each other.

— Optical. The working element of an optical mouse consists of an LED that illuminates the underlying surface and an optical sensor that photographs this surface at high frequency. On the basis of a number of received images, the mouse electronics concludes about the direction and speed of movement of the manipulator and outputs the corresponding data to the computer. Optical mice are inexpensive, reliable enough and not too demanding on the working surface. Initially, they were poorly compatible with certain types of surfaces — mirror, fur, leather, etc.; however, in most modern optical sensors, this drawback is eliminated, and mice of this type are often quite "omnivorous".

— Laser. According to the principle of operation, laser mice are similar to optical ones (see above). The main difference is that they do not use an LED, but a laser, to illuminate the image. Thus, a narrower beam directivity is provided, and as a result, more accurate cursor positioning, which is especially important when working with complex detailed graphics, in games, etc. Theoretically, the laser is less versatile and not compatible with such an abundance of surfaces as optics, but this difference is noticeable only on specific surfaces like fur, polished metal, etc. But the unequivocal disadvantage of this technology is the higher cost.

— Optical, Bluetrack. Optical models (see a...bove) using a sensor with BlueTrack technology. This technology was originally developed by Microsoft, but nowadays it is also found in other manufacturers. The most noticeable difference between such sensors and conventional optical ones is the blue colour of the LED (hence the name). In addition, the design provides for a number of improvements: an increased area of illumination of the surface under the mouse, high resolution of the matrix, coated optics. Thanks to this, BlueTrack mice have high accuracy and are able to function even on “difficult” surfaces such as glass, polished stone, carpet pile, etc.

— Optical, V-Track. Optical sensor using V-Track technology. This technology was developed by A4Tech and is used primarily in mice of this brand. One of the key features of V-Track is that the beam of light in such sensors falls on the work surface vertically (rather than obliquely, as in conventional optics). In addition, the light spot size is very small, the light density is high, and the photodetector lens has a very narrow aperture, which gives a large depth of field. Thanks to these improvements, V-Track provides very high accuracy and (according to the creators) is able to work even on volumetric mechs, where other types of sensors are useless. However, mice with this feature are not cheap.

— Laser, V-Track. Laser sensor using V-Track technology. For more information about this technology, see above, but here we note that the use of V-Track in laser mice allows you to get rid of the main drawback of such devices — sensitivity to non-standard surfaces. At the same time, the positioning accuracy characteristic of laser sensors is further increased by V-Track. On the other hand, the price of such devices is high. Therefore, the combination of a laser sensor and V-Track is extremely rare, mainly in premium gaming mice from the same A4Tech.

— Hybrid. The combination of two sensors in the mouse at once — optical and laser. Such a combination allows you to combine the advantages of both technologies and partially compensate for the shortcomings: in terms of accuracy, hybrid mice are not inferior to laser ones, while they are not so sensitive to non-standard surfaces. At the same time, the presence of two sensors significantly affects the price of the device, while it is possible to achieve similar characteristics with one sensor — due to the BlueTrack or V-Track technologies described above. Therefore, hybrid systems have not received distribution.

Resolution of the sensor responsible for tracking mouse movements on the work surface. Specified in DPI — dots per inch.

The physical meaning of DPI as a whole is as follows. The sensor of a modern mouse works on the same principle as the camera matrix, and consists of pixels. And DPI is the number of pixels that fall on 1 inch of the underlying surface (length or width), "visible" by the sensor.

It is believed that more DPI means a more advanced sensor and mouse in general; nowadays, models for 3500 – 5000 DPI, 12000 DPI, 16000 DPI even more are not uncommon. In a way, it is — high resolution contributes to accuracy. However, the only thing that is directly determined by this indicator is the speed at which the cursor moves across the screen: the higher the resolution of the sensor, the greater the number of pixels that the cursor will move when the mouse itself moves a certain distance. At the same time, it is worth recalling that too high a speed is even more undesirable than too low. So the real need for high DPI ( 1000 and above) arises mainly when working on large screens (4K resolution and more); for more modest displays (HD and Full HD), smaller values are often enough.

The greatest acceleration during movement, at which the mouse maintains normal performance; if this indicator is exceeded, the cursor may “break down” (moving to an unexpected place due to incorrect processing of data from the sensor).

The faster the mouse moves, the greater the acceleration acting on it. Accordingly, this parameter determines the sensitivity to sudden movements, the extent to which this model is able to normally perceive and process such movements. High values of maximum acceleration ( 40 G, 50 G) are important first of all in dynamic games, especially for professional e-sportsmen and advanced enthusiasts. If the mouse is bought for relatively simple tasks (working with documents, surfing the web, etc.), you can ignore this indicator.

The ips (inches per second) parameter is the linear speed of mouse movement, expressed in inches per second, at which the manipulator's sensor is able to read the surface. In top models, the maximum mouse movement speed often reaches 400-600 ips, but devices with ips in the region of 200 are more common.

The presence in the mouse of its own built-in memory.

The main and, in fact, the only way to use such memory is to store various advanced settings (for example, the functions of programmable keys, or even entire user profiles for various games or other tasks). This feature is relevant mainly for gamers, so almost all models with this feature are gaming.

The presence of illumination in the design of the mouse.

This illumination can be provided by the same LED that illuminates the surface below the sensor, or by separate light sources. It can have a different colour, and the most advanced systems — RGB backlighting — allow you to adjust the shade to your liking. Anyway, the backlight gives the mouse an unusual and stylish appearance, besides, it can also have special effects (see below). However, this function has not only an aesthetic, but also quite a practical meaning: for example, a colour change can be used as a DPI level indicator (see above) or as a low battery signal. On the other hand, the backlight affects the cost of the device, and the real need for it is not so often — moreover, in many cases (for example, in the office) an extra “illumination” is completely useless. Therefore, most modern mice still do not have a backlight.

Additional features of the cable that the mouse is equipped with.

These features may include a winding system, a detachable wire, and a braided wire(however, most modern mice still have a cable without a braid). Here is a more detailed description of all these features.

— Retractable. Wire equipped with a special coil for winding. This feature greatly simplifies transportation: during off-hours, the wire is as compact as possible and does not get tangled, and when used, it can be unwound to the desired length (usually the coil allows this possibility). All this is especially important for laptop mice (see "In direction") — in fact, most models with a wire reel fall into this category.

— Removable. Wire that can be detached from the mouse. Almost all mice with two connection options have this feature — wired and wireless: when working in a wireless format, the cable can be removed so that it does not interfere. However, there are also purely wired devices with such a cable — mostly laptop devices, where the wire is removed for ease of transportation. Also note that most often a universal connector like microUSB is used to connect the cable, so if necessary, the wire can be replaced with another one — for example, a longer one.

— In a braid. The presence of an additional braid on the mouse cable. This feature makes the wire more d...urable, reliable and resistant to bending. On the other hand, braid tends to accumulate dirt and fray when worn; because of this, the wire sheath loses its presentation faster than in mice without a braid. Yes, and such a wire is more expensive than a regular smooth one.