United Kingdom
Catalog   /   Computing   /   Input Devices   /   Graphics Tablets

Comparison Huion Inspiroy Dial Q620M vs XP-PEN Deco Pro Small

Add to comparison
Huion Inspiroy Dial Q620M
XP-PEN Deco Pro Small
Huion Inspiroy Dial Q620MXP-PEN Deco Pro Small
Compare prices 1Compare prices 8
TOP sellers
Product typegraphics Tabletgraphics Tablet
FormatA4A5
Workspace267x167 mm231x130 mm
Aspect ratio16:1018:10
Control keys88
Scroll wheel
Touch ring
Connection
Connection typeradio / wiredwired
Connector on deviceUSB CUSB C
Compatibility
Windows
Mac
Android
Windows
Mac
Android
Pen
Pen modelPW500PA1
Pen power sourceno battery (passive)no battery (passive)
Max. reading height10 mm10 mm
Pressure levels81928192
Pen angle60 °60 °
Resolution5080 lpi5080 lpi
Response266 PPS200 PPS
Control keys22
General
In the box
replacement pen nibs
pen holder
USB receiver
replacement pen nibs
pen holder
 
Power sourcebattery / USB portUSB port
Size378x220x8 mm351x200x17 mm
Tablet weight0.66 kg
Added to E-Catalogfebruary 2020january 2020

Format

The paper size that corresponds to the size of the tablet's active surface.

This parameter is specified only for traditional tablets and smart-notebooks (see "Type"). At the same time, the specific size of the device does not always strictly correspond to the specified format. For example, an A4 tablet can be either a little larger or a little smaller than a standard landscape sheet of 210x297 mm. Nevertheless, according to the specified format, one can easily estimate the dimensions of the tablet as a whole and its general “weight category”.

Nowadays, on the market you can find devices in formats from A3 to A7, and the most popular options are the A4 mentioned above, as well as A5(148x210 mm) and A6(105x148 mm). In general, larger tablets are easier to use, but also more expensive.

Workspace

The exact size of the active area of a tablet (or screen in a graphic display) in width and height. In general, it is more of a reference than a practically significant parameter: when choosing a traditional graphics tablet, there is often enough information about the format (see above), and for displays, primarily the diagonal (see above) and aspect ratio (see below) are of practical importance . However, the exact dimensions can also be useful in fact: for example, you can determine the aspect ratio from them (for classic tablets, this parameter is often not indicated).

Aspect ratio

The aspect ratio of the tablet working area (width to height). This parameter allows you to evaluate the overall proportions of the device: for example, the ratio of 4:3 gives an almost square shape of the work area, and in 16:9 models it is noticeably elongated in width.

Actually, "widescreen" aspect ratios — 16:9 and 16:10 — are now much more common than the classic 4:3. The 3:2 standard is also rare, although it is actually also a widescreen. This situation is due to the fact that, ideally, the aspect ratio of the monitor and tablet should be the same (otherwise, there may be a mismatch in the movement of the pen and the cursor on the screen, or part of the screen or tablet area will be unused). And the most popular nowadays are just monitors in 16:9 and 16:10 formats, the 4:3 standard is much less common, and 3:2 is extremely rare.

Scroll wheel

A wheel for scrolling content on the screen, similar to that used in modern computer mice. A similar wheel is placed on the side or top of the graphics tablet case. It is used for quick navigation through graphical applications, documents or web pages. At the same time, the scroll wheel has expanded functionality - by pressing it you can perform certain commands or gestures such as zooming an image, scrolling horizontally, etc.

Touch ring

The device has a touch ring for quick control of popular parameters. By simply moving your finger around the ring, you can zoom and scroll in graphics applications, switch between layers, change brush size, rotate the canvas, etc. Note that the touch ring can have several operating modes, and a physical button in the center of the circle is often responsible for switching between them. In advanced devices, the ring can be reprogrammed for certain actions, and even sensitivity (scrolling speed) can be adjusted.

Connection type

Regular way to connect a tablet to a computer.

Wired. Wired connection, usually via a USB port. This method is not very convenient: the wire limits the maximum distance from the tablet to the PC, and sometimes it has to be pulled to hard-to-reach places (for example, if the system unit is installed under the table with ports to the wall, and there are no available connectors on the front panel). On the other hand, in most cases, these inconveniences are not critical, and the wired tablets themselves are not as expensive as wireless ones, and besides, they do not require their own power supply.

Wireless. Wireless connection can be carried out in two main ways — either via technology or via a dedicated radio channel. The first option is convenient because the tablet can be connected to any computer with Bluetooth — for example, a laptop or monoblock — without the use of special adapters; however, if there is no Bluetooth module in the computer, you will still need an adapter, and you will have to buy it separately. Models connected via radio, by definition, are equipped with an adapter and work only through it. Anyway, wireless tablets are more convenient than wired ones: the communication range usually reaches several metres, which allows you to freely move away from the comp...uter (for example, draw in your favorite chair, holding the tablet on your lap). On the other hand, these devices are significantly more expensive, require their own power supplies, and have limited battery life.

— Wired/wireless. Models that support both of the connection options described above. Thus, they combine the advantages and partly compensate for the shortcomings of wired and wireless models. So, when the user is sitting right at the computer, the tablet can be connected with a wire and save battery power, and if freedom of movement is needed, the device can be disconnected and use a wireless connection. However, these models are not cheap.

Pen model

The model of the pen that comes with the device. Allows you to understand which one is used and learn more fully its full characteristics. In this case, in the case of a replacement, you will already be aware of which accessory is needed for the purchase. However, nothing prevents you from replacing the existing one with a more advanced one, of course, if the graphics tablet itself allows you to work with a different pen model.

Response

A characteristic of a graphics tablet that determines how many times per second the tablet records the artist’s actions. The response rate is expressed in PPS (Points Per Second).

The higher the PPS value, the more responsive the surface is. If responsiveness is low, there is a possibility of getting jagged lines when working with the pen, and the stylus cursor may lag behind the movement of your hand. Devices with a response of 266 PPS or more perform best, the “golden mean” is the range of values 230 – 233 PPS and 250 – 260 PPS, and in entry-level models the response can be 220 PPS or less.

In the box

- Mouse. Availability of a computer mouse included with the tablet. Note that such an accessory can be useful even if you already have a mouse: tablet mice are usually specialized models that are distinguished by high accuracy and/or advanced functionality and are well suited for working with graphics. However, it wouldn’t hurt to clarify the specific capabilities of the mouse separately.

Replaceable pen nibs. The use of such accessories is connected with two points. Firstly, the stylus tip is usually made quite soft so that when working with the tablet, it is the pen that is erased, not the touch surface. Secondly, specialized tips are produced for styluses that allow you to simulate the sensations of using various artistic tools - felt-tip pens, brushes, etc. Accordingly, the delivery package may include both spare tips of the same standard type and tips of different designs; This point should be clarified separately. However, in any case, such a set will be useful for those who draw often and a lot.

Pen holder. In accordance with the name, this device is used to secure the pen during non-working hours - so that the stylus does not get lost and is always in a clearly defined place. Note that the holder can be made either as a part on the tablet body (for example, a hinge), or as a separate device that can be mounted in a convenient place on the tab...le. In addition, it can have seats not only for the pen, but also for replaceable nibs for it, if they are provided in the kit (see above).

- Glove. The kit includes a special glove made of lycra or other similar material. The glove reduces friction between the hand and the active area of the graphics tablet, providing a smooth glide while working and helping to avoid hand marks. As a rule, such “clothes” are designed for two fingers (little finger and ring finger). And the fingers that hold the pen for drawing remain free.

- USB receiver. A device found in models with wireless or combined connections. Such a receiver is connected to the USB port of a computer or laptop, and communication via a radio channel is carried out through it. However, this accessory can also be found in Bluetooth models - in them it plays the role of an adapter for equipment that is not equipped with its own Bluetooth modules.
Huion Inspiroy Dial Q620M often compared
XP-PEN Deco Pro Small often compared