Comparison Soshine 1x18650 3600 mAh micro USB vs Bailong BL-18650 8800 mAh

The rated capacity of a battery is the amount of energy it can store.

This parameter directly determines how long the power supply can operate with a particular load. However, when assessing capacity, there are two things to consider. First, the capacitance rating is usually specified for a specific discharge power. So, for salt and alkaline full-size batteries (see “Technology”), this power is measured in tens of milliamps. But if it is significantly exceeded (on the order of hundreds of milliamps), the actual capacity of the battery may decrease significantly compared to the declared one. Therefore, for example, it is not recommended to use disposable batteries in digital cameras - the power consumption in such equipment can exceed 1000 mAh, and NiMh batteries cope best with such a load. And miniature silver-zinc batteries of the “300” series (SR) are available in two versions - for high and low discharge power; CR series button batteries can have a similar low-power version (for more details on both, see “Size”). More detailed information on discharge currents for different types and sizes of batteries/accumulators can be found in special sources; and in some cases (mainly for lithium-ion batteries) it is directly specified in the characteristics (see “Nominal discharge power”, “Maximum discharge power”).

The second caveat is that the actual energy reserve depends not only on the number of milliamp-hours declared, but also on the operating voltage;...so you can only compare by numbers in mAh batteries/accumulators with the same voltage (in extreme cases, with a similar voltage, for example, 3 V and 3.6 V). However, other comparisons are rarely required in practice.

Rated voltage of a fully charged battery or a fresh battery. The practical value of this parameter may differ slightly from the nominal one, however, in the design of most electronics models, this feature is usually taken into account, and the user himself does not need to worry about this. And in general, voltage data in most cases does not play a key role and is more of a general reference information. This is due to the fact that all sizes (see above) have requirements not only for the overall design of the battery, but also for its voltage. Therefore, it is necessary to pay special attention to this indicator mainly in specific cases, such as searching for interchangeable elements or assembling a home-made electrical circuit and selecting power for it.

Rated discharge current provided by the battery. This is the highest discharge current at which the battery will operate without a voltage drop and without a noticeable decrease in the actual capacity. It is worth paying attention to this parameter first of all if the battery is purchased for a device that is sensitive to supply voltage — for example, for a multimeter.

The rated discharge current is indicated only for rechargeable batteries (see "Type").

Built-in electronic circuit that protects the battery from operating conditions.

This function is found mainly in lithium-ion batteries (see “Technology”). This is due to the fact that such batteries have fairly strict charging and discharging rules; violation of these rules (primarily overcharging and overdischarging, as well as overcurrent) can lead not only to battery failure, but also to fire and even explosion. To avoid such troubles, protection boards are used: they primarily control the charge level, as well as charging and discharging power.

This feature is highly recommended if the battery is to be used in a device that does not have its own battery controller. A striking example is electronic cigarettes with mechanical battery mods, in which the atomizer coil is connected to the battery virtually directly. Without a protection board, the customer must carefully control the operating mode himself - and this is not so easy, given the absence of any additional indicators in the same “mechanical mode”.

On the other hand, it is worth considering that this function affects not only the cost, but often also the dimensions of the battery - it can increase its length by several millimeters beyond the nominal size. For example, 18650 elements with a protection board are not 65 mm long, but about 68 mm. In some cases, this can create problems with installation, or even make it impossible. So if the device fo...r which the battery is purchased has its own protection circuits, the optimal choice for such a load would be a regular, “unprotected” power source.

The ability to connect the battery directly to the USB port for charging. The specific implementation of this function may be different. Most often, a miniature socket like microUSB is provided on the battery case, and a corresponding cable is included in the kit, however, there are also more original solutions — for example, a built-in USB connector, covered by a lid during normal use. Most elements with this function belong to the popular 18650 size, but it can also be used in other sizes — in particular, AA and PP3.