Comparison Grand ATG-21 vs Grand ATG-21 2v1

The width (diameter) of the trimmer knife characterizes the size of the paddle knife (or saw blade). Such a nozzle has a smaller capture width than a fishing line, however, it allows you to mow more dense thickets, including shrubs.

The type of handle provided in the design of the trimmer or combisystem (see "Type").

The choice for this parameter depends primarily on the personal preferences of the user, however, there are also quite objective differences between different types. The types themselves can be:

— Bicycle. A handle in the form of a pair of characteristic "horns" on either side of the trimmer bar, reminiscent, in accordance with the name, of a bicycle handlebar. This design allows you to comfortably mow the grass and perform other similar work; it is good in that the user's hands are in the most natural position when holding the tool. In addition, we note that the handles are convenient for both right-handers and left-handers. The disadvantage of models with bicycle handles is the relatively large weight and dimensions, as well as poor suitability for cutting branches and other work "at height". However, in the case of trimmers, such a need arises extremely rarely (especially since there are specialized varieties of garden tools for this — brush cutters and pole saws). Therefore, it is this option that has received the greatest popularity in modern trimmers.

— Loop -shaped. The handle, which looks like a characteristic loop, usually in the shape of the letter D. The role of the second handle in such a tool is usually played by the back of the bar, and the trimmer controls are also located there....In general, this design is considered less convenient than a bicycle one: the user has to either hold the tool with the barbell to the side, or pull one hand back strongly. On the other hand, the loop-shaped handle gives good vertical manoeuvrability and allows you to work both at ground level and much higher, and you can easily change the height of the nozzle. As a result of all this, although this option is less popular than the “bike”, it is still quite common, mainly on relatively light and low-power trimmers.

— Adjustment of the tilt of the rod. Possibility to tilt the rod or the working head relative to the rod. The setting will come in handy for mowing grass in hard-to-reach places. Trimmers with this function are much more convenient to work under swings, benches and garden furniture. Also, by adjusting the tilt of the rod, you can adjust the grip of the trimmer to the height of the user.

— Telescopic rod. Possibility of increasing the length of the trimmer by extending the rod. Due to design features, this solution is available only for models with a lower engine and helps to maximally adjust the device for a person of any height.

— Collapsible rod. Possibility to disassemble the trimmer rod into several parts. This feature greatly simplifies storage and transportation: packing, carrying and transporting side-by-side components is easier than a solid long rod. In theory, this design is less reliable than a non-removable design, but trimmers are usually not subjected to such high loads that this would be noticeable.

- Belt. The strap for carrying the trimmer is a shoulder or backpack strap. This design significantly simplifies the operator’s task and reduces operator fatigue: carrying it with a belt is not as tiring as holding the tool in your hands. The shoulder strap is supposed to be worn over one shoulder....It helps you control the trimmer better and reduces fatigue, especially during long periods of use. A more complex backpack strap system allows you to distribute the weight of the tool on both shoulders and back. In this implementation, the belt will not slip off the shoulder when wearing the trimmer. Please note that in models without a belt, it may be possible to purchase it separately. However, it is easier (and often cheaper) to immediately buy a tool with this accessory.

— Limit bracket. The bracket acts as a limiter and is designed to protect tall (necessary) vegetation from mowing. Those. you can extend a small structural element at the base of the rod, which, when approaching the bushes, will move them away, thereby not cutting them off. The bracket will also be appropriate when mowing an area with a fence, decorative landscape with many elements that can be damaged during mowing, or can once again “shorten” the fishing line by breaking its ends.

— Rotating head. Possibility of rotating the trimmer working attachment on the rod. Typically this function is used to move the cutting system from a horizontal to a vertical position. Vertical cutting can be useful, for example, for leveling edges and creating borders in lawns.

— Edging roller. The roller is necessary for a neat “haircut” between the lawn and the sidewalk. It is found in models with a rotating head and is designed for more comfortable work. Since the device does not need to be suspended, leaning on the roller makes it much easier to edge flower beds, decorative elements on the lawn, borders, etc.

— Support rollers. Special rollers mounted on the cutting head of the trimmer. Thanks to such rollers, you can rest the head on the ground and roll the tool in front of you - this is more convenient than carrying it “on yourself”. Another advantage is that the rollers support the working attachment at the same height, which means that mowing is as accurate as possible, almost like using a regular lawn mower (with all the advantages of a trimmer). The main disadvantages of models with rollers are the high cost, as well as increased weight, which makes it difficult to work “off the ground.”

- Bladed knife. A knife in the form of a pair of blades, rotating around a vertical axis in the manner of a propeller blade. Two blades are the most popular, almost standard option for rotary lawn mowers (see "Cutting System"). Note that in the case of trimmers, the use of a knife allows you to achieve higher productivity and better cope with thick grass than using a line reel. On the other hand, blades do not tolerate contact with stones and other hard objects very well; in case of such troubles, various tricks can be provided (for example, an automatic engine brake).

- Spindle knife. Nozzles used in spindle-type lawn mowers. For more information about such units, see "Cutting system", here we recall that spindle knives are inferior to bladed ones in terms of performance and efficiency in thick grass, however, they provide a "cleaner" cut, which allows you to give the lawn the most accurate appearance. So this option is well suited for regular cutting of relatively sparse, well-groomed vegetation.

- Reel with fishing line. Most often used in trimmers (see "Type"). According to the general principle of operation, it is similar to a bladed knife (see above), however, in this case, the working tool is not blades, but pieces of thick fishing line rotating at high speed. The main advantage of the fishing line over a bladed knife is its almost complete insens...itivity to collisions with stones and other solid objects: such a “blade” will only bend from impact and literally immediately straighten due to centrifugal force. True, such nozzles cope with thick stems somewhat worse, but in practice it all depends on the thickness of the fishing line (see above) and the speed of its rotation.

- Cultivator. Nozzle designed to loosen the soil. Outwardly, it is a set of gears mounted on a horizontal axis with teeth of a specific bent shape. Due to the rotation of these wheels, loosening is carried out. Combisystems are mainly equipped with such nozzles (see "Type"). At the same time, the width of the cultivator is usually small, it is poorly suited for full-fledged garden work, but it can be useful when processing a small flower bed or several beds.

- Saw blade. Attachment for cutting relatively thick, stiff stems (e.g. bushes or small tree branches). Mounted mainly on trimmers (see "Type"). Outwardly, such a nozzle is very similar to the working element of a circular saw: it uses a rotating rim with characteristic teeth along the edges. The rim may have holes - to reduce weight.

- Scissor mower. In this case, it means a special attachment, most often used in mowers (see "Type"). Such a nozzle has the form of a characteristic horizontal "comb" with two rows of teeth moving relative to each other. Its design is described in more detail in the “Cutting system - Scissor” section, here we note that hay trimmers are indispensable when working with dense vegetation and thick stems, they easily cope with thickets that are “too tough” for other attachments.

- Without nozzles. The absence of any nozzles in the regular configuration of the lawn mower. It is assumed that the customer will purchase them separately for specific needs.

The maximum speed that the engine in an electric mower can run at (see "Engine type").

It makes sense to compare according to this indicator only engines of the same power. In general, higher rpm improves performance but reduces torque. Conversely, a relatively slow engine will be inferior to a “fast” one in overall speed, but it will better cope with dense dense vegetation. So it’s worth choosing by engine speed, taking into account what is more important to you — speed or efficiency in difficult conditions.

The presence of a soft start system in the lawn mower engine.

The design features of electric motors are such that when power is applied directly, the start occurs very abruptly — both in a mechanical and electrical sense. Firstly, the engine itself spins up in a jerk, in a very short time, which increases the wear of its parts. Secondly, at the moment of start-up, there is a sharp jump in current strength, which creates significant loads on the power grid (or the batteries of the unit). The soft start system eliminates these phenomena: it limits the starting current, allowing the motor to accelerate smoothly and preventing voltage surges.

On the other hand, additional electronic circuits affect the cost, sometimes quite significantly. So there are few models with this feature nowadays, and you should pay attention to them mainly in cases where the mentioned advantages are of fundamental importance — for example, if the device is purchased for a house with weak wiring that does not tolerate voltage surges.

The operating time of a battery-powered device (see "Motor type") on a single battery charge.

This indicator allows, to a certain extent, to assess the battery life of the unit. However note that the characteristics usually indicate the operating time under certain conditions, usually very favorable: low load on the nozzle, low and constant engine speed, etc. Therefore, in fact, battery life may differ from the claimed one — usually in a smaller direction, but vice versa is also possible. Nevertheless, according to the claimed operating time, it is quite possible to compare different models of cordless tools: the difference in official characteristics usually corresponds to the difference in actual battery life.