Comparison Oclean W10 vs B.Well WI-912

The cleaning technology used by the toothbrush (see Type).

Nowadays, you can mainly find brushes with reciprocating-rotating, reciprocating-sweeping, and sonic cleaning technologies; the first two options can also be supplemented with pulsating technology. The main difference between these methods is the nature of the bristles' movement; here is a more detailed description of each option:

— Reciprocating-rotating. The traditional way of moving bristles in brushes with round heads. As the name suggests, such a head rotates back and forth at a small angle during operation. This technology is considered somewhat more advanced than reciprocating-sweeping — in particular, it provides better treatment of the interdental space and other similar places. True, such brushes are still not as effective as sonic ones — but they are also noticeably cheaper.

— Reciprocating-sweeping. Historically, this is the first technology used in brushes with oval attachments. The bristles in models with this operating principle oscillate left and right, like the twigs of a broom — hence the name. Classic reciprocating-sweeping brushes are simple in design, but not very effective. As a result, there are few such models these days, mostly budget devices, and most brushes with oval heads use more advanced sonic technology.

—...Pulsating. Usually this term refers to the operating format in which the bristles move up and down relative to the surface of the nozzle, in other words — they go deep into the head and extend back. This technology is almost never used in its pure form; it usually complements a reciprocating-rotating or reciprocating-sweeping head, providing the ability to 3D clean (see “Modes”). But if the 3D mode is not declared in the toothbrush, it is worth separately clarifying what is meant by pulsating technology. So, in some models we are actually talking about a whitening mode, when for maximum intensity of action the device does not work constantly, but in separate pulses; in others, the term “pulsating” actually refers to the sound mode of operation.

— Sonic. A cleaning technology that involves oscillating bristles with a small amplitude at a high frequency — up to 40 thousand oscillations per minute; this speed corresponds to the frequencies of audible sound, hence the name. This method of operation is considered more advanced than the reciprocating-rotating and especially the reciprocating-sweeping technology. Thus, due to the high speed of oscillations, sonic brushes create a fine homogeneous foam from paste, saliva and air during cleaning — this foam easily penetrates even hard-to-reach places; in addition, the vibration itself is effective in affecting plaque, including in the interdental space.

The number of working nozzles that are standardly supplied with the device. Nowadays, options are quite common with both one and two or three nozzles in the kit; and in the most extensive sets, this number can be four or five or even more.

In many sets, several nozzles may have different purposes. For instance, an irrigator, in addition to its standard nozzle, might include orthodontic and periodontal nozzles. However, it's important to note that models with the same number of accessories in the kit can have different specific specializations. So, when making a choice, it's wise to consider not just the quantity but also the types of nozzles available. Additionally, there's an option where several identical interchangeable heads come with one handle. This configuration is particularly common in toothbrushes. It enables multiple individuals, such as family members, to use a single device, and such a set is usually more cost-effective than purchasing individual toothbrushes for each person.

The number of power modes provided in the device. For flossing systems (see "Type"), this paragraph takes into account the characteristics of the irrigator; data on the toothbrush (if they differ) are indicated in the note.

It's important to distinguish between the number of power settings and the number of operating modes, as these are distinct parameters. Refer to the "Operating modes" section for details on the various modes. In this context, we emphasize that power adjustment, if available, may not be accessible in all modes. For example, in an irrigator offering two modes of operation—continuous jet and pulsation—power adjustment might only be available in the continuous jet mode.

Having multiple power settings enhances the versatility of the device. Even if a device technically offers only one operating mode, the ability to adjust the intensity of the treatment allows users to tailor the device for various tasks. For instance, in many toothbrushes, the traditional 2D brushing mode at its lowest power setting effectively serves as a gentle treatment option. However, it's worth noting that the capability to adjust power levels can somewhat increase the device's cost.

Operating modes supported by the device.

Toothbrushes have the greatest variety of modes these days. In addition to the traditional (so-called "2D") daily cleaning, they can feature a 3D mode, delicate and deep cleaning programs, polishing, whitening, gum massage, and tongue cleaning. Irrigators, in turn, in addition to the standard format of operation with a continuous stream of water, most often provide a pulsation and/or spray mode.

Here is a detailed description of the most popular options found in brushes:

— Daily cleaning (2D). The operating mode is closest to traditional (manual) toothbrushes. In this mode, the bristles of the brush move in one plane; the trajectory of movement may vary, depending on the cleaning technology (see below). The intensity of action in this case is usually medium/high, so this operating format is intended mainly for relatively healthy and not too sensitive teeth. The recommended daily cleaning time is 2 minutes, 30 seconds for each quadrant of the oral cavity; the corresponding settings are usually provided in the timer (if available - see below). In general, 2D cleaning is somewhat less effective than 3D (see below), but this option can b...e provided even in the most inexpensive toothbrushes.

— Daily cleaning (3D). A function found in brushes with reciprocating-rotating and reciprocating-sweeping technology. In such models, in addition to the main cleaning technology, the bristles pulsate up and down (more precisely, into the head and back). Thanks to this, cleaning is carried out in three planes at once, which significantly improves efficiency compared to the 2D cleaning described above: the bristles not only treat the outer surface of the teeth, but also to a certain extent capture the sides and interdental space (although such cleaning is not a full-fledged replacement for the use of dental floss). The disadvantage of this function is traditional - relatively high cost.

— Gentle cleaning. A gentle cleaning program used mainly for sensitive teeth and gums prone to bleeding. In toothbrushes with reciprocating-rotating and reciprocating-sweeping cleaning technology (see below), the gentle mode most often provides for a reduced rotation/oscillation speed of the nozzle; in sonic and ultrasonic models, gentle cleaning can be ensured by reducing the amplitude of oscillations. In any case, this mode maximally eliminates discomfort during brushing and the likelihood of gum damage - even when using standard nozzles; and for the most gentle effect, it is best to use this function with a nozzle for sensitive teeth.

— Deep cleaning. Most often, this name refers to cleaning with standard intensity, but with an increased duration — for example, 3 minutes instead of the usual 2 minutes (45 seconds for each quadrant of the mouth instead of the traditional 30 seconds). This mode allows you to clean your teeth as effectively as possible and remove dirt for which regular daily cleaning is not enough.

— Polishing. A mode for treating relatively clean teeth that do not require full-scale cleaning. As a rule, polishing is performed at a reduced frequency of oscillations (rotations) and takes significantly less time than conventional treatment (for example, 1 minute instead of the traditional 2 minutes).

— Whitening. A special mode for whitening tooth enamel and removing various stains, primarily from the front teeth. It can be an extended version of the regular cleaning mode: for example, when turned on for whitening, the brush works in the regular format for 2 minutes, and then for 30 seconds in the high-intensity mode. These nuances should be clarified separately; it also does not hurt to clarify the contraindications for using this mode (especially with sensitive teeth and/or gum problems).

— Gum massage. Gum treatment can be provided as a completely separate program, or as an addition to the usual cleaning mode. This function provides not only effective cleaning, but also strengthening of the gums — it can be useful for treating inflammation and bleeding, although in such cases you should first consult a doctor.

When using irrigators, the gum massage effect is achieved by delivering a pulsating jet of variable intensity or by spraying a water-air mixture (a cloud of small droplets). For more information on these modes, see below.

— Tongue cleaning. A separate mode for cleaning the tongue. Many people find that cleaning their tongue with an electric toothbrush causes a tickling sensation that is difficult to tolerate for a long time. In light of this, this mode usually provides for a short duration of continuous treatment — about 20 seconds; if necessary, such “sessions” can be carried out several times. It is also worth mentioning that the presence of a tongue cleaning mode in itself does not mean that the kit includes a special attachment for such cleaning (see “Attachments”), although most often such a device is included in the kit.

It should be noted that in some toothbrushes, the mode change is carried out using “smart” attachments: when such an attachment is installed, the device recognizes it by the built-in chip and automatically switches to the appropriate program.

In turn, in irrigators the features of the main modes are as follows:

— Pulse. The pulse mode of the irrigator means the supply of cleaning fluid in the form of a pulsating stream. Such a flow effectively removes plaque and food debris, helps to thoroughly clean the space between the teeth, under the braces and periodontal canals (especially in hard-to-reach places).

— Jet (single-stream). Classic, most popular format of work: permanent jet with permanent pressure. Provides sufficient efficiency for most tasks for which irrigators are used, while being extremely easy to implement and can be provided even in the most inexpensive models.

— Pulsating. Water supply with variable pressure. This mode is especially effective for removing dirt from the interdental space, under braces and in other hard-to-reach places.

— Spray (atomizer). In this mode, a mixture of water and air is supplied through the nozzle, due to which, instead of a regular stream, a cloud of small drops flying at high speed is obtained at the outlet. This mode is great for gum massage and general cleaning of the oral cavity.

The frequency of sound vibrations provided by a toothbrush with a sonic operating principle. This parameter also means the maximum pulsation frequency for toothbrushes with support for pulsating cleaning technology (see above) and for irrigators with a pulsed operating mode. For dental centers (see "Type"), data on the irrigator is usually specified here, and the pulsation frequency of the toothbrush (if this parameter is relevant for it) is indicated in a separate note

High frequency of movements and pulsations(from 40 thousand/min and higher) has a positive effect on the efficiency and quality of treatment, allowing you to quickly deal with dense plaque and even tartar. On the other hand, too intensive treatment can also be undesirable - for example, with high tooth sensitivity. All this is also relevant for irrigators - except that the operating frequencies in them are noticeably lower, such devices very rarely produce more than 2 thousand pulsations per minute. So when choosing, do not chase the maximum indicators of the frequency of movements and pulsations, but first of all it is important to take into account the individual characteristics of the user - for a full guarantee, it would not hurt to consult a dentist about this.

The pressure of the water supplied by the irrigator (see "Type") to the operating nozzle. Usually, this pressure can be adjusted within a certain range, since different situations and purposes require different processing intensity. The wider this range, the more versatile the device.

The lower limit of the pressure range in modern irrigators is around 30 kPa; similar values are set for procedures for sensitive teeth, for certain gum diseases and in other cases where the most gentle treatment is required. 400 – 500 kPa is considered an average level, and 600 – 650 kPa is considered high, such indicators allow for deep cleaning (see "Functions"). And higher values are rare, and they are used mainly when cleaning the tongue. However, it is best to consult with a dentist before purchasing an irrigator and choose a model for working pressure based on the recommendations received.

The volume of the reservoir for water (or treatment solution) provided in the design of the irrigator or flossing system (see "Type").

In general, the larger the tank, the less often you have to refill the device, but the larger, heavier and more expensive the whole structure is. Thus, in portable format irrigators, where the water tank is built right into the handle, the capacity is small — even in the largest models it usually does not exceed 400 ml, a larger tank would noticeably complicate use. However, even the smallest volumes in such cases are usually enough for at least one standard procedure. But stationary models, consisting of a handle and a separate main unit, can hold very significant volumes of water — up to 1.5 L or even more.

The last mode memory allows the device to "remember" which mode was active at the time of shutdown — thus, after switching on, work will continue in the same mode.

This feature is primarily found in toothbrushes (see "Type"), especially relevant due to the various programs available in such devices. However, it's important to consider that the memory of the last mode is convenient when consistently using one mode. If switching between different modes, it can become inconvenient. For instance, if a user starts with a regular cleaning program and then switches to a separate polishing program, the brush will default to polishing mode each time it's turned on, requiring manual adjustment to switch back to cleaning mode. Therefore, before seeking a device with this feature, ensure it aligns with your usage needs.

Possibility of mounting the device on the wall.

The design of the mount for these devices depends on the device type (as mentioned earlier) and how it's typically used. In the case of most toothbrushes, which are typically self-powered, they come with a wall-mounted stand that also functions as a charger. Some irrigators and dental centers follow a similar setup, but many of these devices are designed for stationary use and have a larger main unit to which a handle with a nozzle attaches. In such models, the wall mount is designed to accommodate the entire main unit.

Wall installation offers a significant advantage by saving shelf space, which is particularly beneficial in tight spaces. However, this installation method entails additional preparatory work, which can be somewhat challenging. Furthermore, not all wall mounts facilitate easy removal and installation of the device, making it less suitable for situations where you frequently need to take the toothbrush or irrigator with you on trips.