Load capacity
Wheelbarrow / trolley capacity — the maximum weight of the load that can be constantly carried on it.
In this case, a load capacity
of up to 150 kg is considered small; wheelbarrows in this category are intended mainly for gardening, and carts for relatively small loads like a sack of potatoes or a couple of sacks of cement. Models for
150 – 200 kg can be attributed to the middle category, among them it already makes sense to look for cars for construction work of a relatively small volume. And in the most durable and "hardy" products, this figure can
exceed 200 kg, reaching 500 kg or even more.
It is worth noting that most modern wheelbarrows / carts (especially at the beginning of operation) can easily carry short-term loads that exceed the claimed carrying capacity without visible consequences. However, overloading the structure is highly discouraged: in such cases, it will experience off-design stress, which reduces the overall service life and increases the risk of failure at the most inopportune moment.
Body capacity
The total volume of the body of a wheelbarrow or trolley (if any, see "Type"). The larger the body, the more cargo can be placed in it, especially when it comes to liquid or bulk materials. At the same time, it should be noted that manufacturers usually choose a body for a particular model taking into account its carrying capacity; therefore, when choosing, it makes sense to look first of all at the weight of the cargo being transported, and only then — at the volume of the body.
In addition, note that the volume is measured to the upper edge of the body — this means that loose or other materials that can be loaded “with a slide” can fit more in a wheelbarrow than stated in the volume specifications.
Additional body support
The presence in the design of the wheelbarrow (see "Type")
of additional support for the body. This support is located under the front side of the body (usually sloping) and provides additional support. Its design may be different, but anyway, such cars are more reliable and resistant to serious loads than those without additional support.
Wheel guard
The presence of a
strut in the design of the wheelbarrow (see "Type").
A strut is called a fixture in the area of \u200b\u200bthe front wheel (s); it can be made as a U-shaped piece between the wheels, a pipe around the wheel, two separate shaped pipes in front of each wheel, and the like. Anyway, the strut significantly simplifies the unloading of the wheelbarrow: with a strong forward tilt (for example, if you need to pour sand on a pile), it rests on the ground and works as a support — this is much more convenient and safer than resting the wheelbarrow on a freely spinning wheel.
In addition, the strut can play the role of a third support (along with the support legs) even if the wheel needs to be removed — for example, to close a hole.
Weight
Total weight of an empty wheelbarrow/cart in standard working configuration (if equipped with detachable support legs — with legs installed, see above). This parameter allows you to estimate how much excess weight you will have to carry with you in addition to the actual cargo. However it doesn't always make sense to chase light weight — it can mean less strength.
