United Kingdom
Catalog   /   Tools & Gardening   /   Machines & Equipment   /   Metal Detectors

Comparison Nokta Makro Legend WHP vs Fisher F22

Add to comparison
Nokta Makro Legend WHP
Fisher F22
Nokta Makro Legend WHPFisher F22
Compare prices 1Compare prices 1
TOP sellers
Main
Multi-frequency SMF technology. Hours counter.
Target Depth Determination
Typemetal detectormetal detector
Suitable for
underwater /up to 3 m/
ground
Principle of operationVLF
Coil/frame
Type
 
DD
concentric
 
Shape
round
 
 
elliptical
Waterproof
Dimensions (WxD)28x28 cm
Number of coils11
Specs
Number of detection frequencies51
Detection frequency5, 10, 15, 20, 40 kHz7.69 kHz
Max. detection depth150 cm75 cm
Coin detection depth35 cm25 cm
Discriminator
Discrimination segments609
Ground balancemanual / automatic
Features
Number of modes44
Search modespark, field, beach, goldjewelry, coins, relics, custom
Functions
Pin-Point mode
sensitivity adjustment
threshold tone
anti-interference
tone identification
VDI identification / Target ID
target depth determination
vibration response
volume control
low charge indicator
Pin-Point mode
sensitivity adjustment
 
 
tone identification
VDI identification / Target ID
target depth determination
 
volume control
low charge indicator
More features
LCD display
display backlight
USB port
armrest
built-in speaker
headphone output
Bluetooth
headphones
built-in flashlight
LCD display
 
 
armrest
built-in speaker
headphone output
 
 
 
General
Power source
proprietary battery /Li-Po, 5.05 Ah/
2xAA
Max. operating hours20 h30 h
Additionally includedUSB cable, case, cap
Shaft length63 – 132 cm105 – 130 cm
Weight1.4 kg1.04 kg
Added to E-Catalogdecember 2021august 2015

Suitable for

- Ground. Metal detectors designed to find metal objects buried in the ground - from coins and other historical artifacts to pipelines and caches. They can have different characteristics and scope of application - from the simplest models, suitable only for collecting scrap metal, to powerful professional devices capable of searching even at a depth of a couple of meters. The coil can be protected from moisture (see below), but ground metal detectors are not designed for complete immersion in water.

- Underwater. Metal detectors, designed, as the name suggests, to search for objects under water - primarily at the bottom of reservoirs. Their main features are due to optimization for the environment: a sealed waterproof case (in most cases, with the ability to submerge the entire body to a depth of several meters), the ability to work with wet salty soils, and a weight distribution designed for ease of use under water. Also, such models are usually equipped with waterproof headphones. Note that buying such a device for land use is hardly justified: holding an underwater metal detector in the air is not as convenient as a regular ground detector, and the expensive moisture protection of the case loses all its meaning.

- Inspector. Devices designed to conduct searches and search for metal objects on the human body, under clothing. They are used by law enfo...rcement agencies, security services at airports, train stations, security agencies, etc. Note that in this case we are not talking about stationary “frames”, but only about hand-held detectors. Almost all of them belong to pinpointers (see “Type”) and have a fairly compact size. Thanks to this, the device can be used as a portable device for express inspections, constantly carried with you along with other equipment. However, such a detector can also be useful at a stationary checkpoint, in addition to the frame - it helps to determine exactly where on the body the object that “disturbed” the frame is located.

For mine clearance. Highly specialized metal detectors for detecting mines or other explosive objects left by the echo of wars and hostilities. Such devices do not need to separate finds by type of metal. Their main purpose is to search for large projectiles, but there are other types of devices for solving specific problems (for example, detecting plastid with a fuse). Small pieces of hardware are usually ignored by such metal detectors. Mine clearance detectors are rarely found in common use, and they are incredibly expensive. Devices for this purpose are heavy and inconvenient, but durable and resistant to weather conditions. They are aimed at professional use by the military and rescue workers.

Principle of operation

A method used by a metal detector to find items. Describes both the general scheme of the signal and how it is processed.

VLF. Abbreviation for "very low frequency". As the name implies, these metal detectors operate at relatively low electromagnetic frequencies (less than 20 kHz). They use the “transmitter-receiver” operation scheme: one winding transmits the search signal, the other receives it. The transmitting and receiving windings are located in the same plane, in a concentric pattern or DD (see Coil Type). This technology allows you to create relatively inexpensive devices with good ground balance, minimal sensitivity to false alarms and a high degree of accuracy in metal recognition. Of the shortcomings, it is worth noting the rather high cost of production (coils require precision tuning), as well as the relatively small working depth of such metal detectors.

VFLEX. A variation of the VLF technology described above, developed by Minelab. The key principles of operation in such metal detectors are the same, however, the control unit in them receives not an analogue, but a digital signal. This has a positive effect on the quality of its processing, but significantly increases the price of the devices themselves.

R.F. This principle involves the use of high frequencies and the presence of two coils — a receiver and a transmitter — sep...arated by a certain distance (usually several tens of centimeters) and located perpendicular to one another. Such a scheme provides a greater depth of detection, but does not allow you to search for small objects and determine the type of metal. Therefore, it is mainly used in "deep" metal detectors.

— P.I. Abbreviation for "pulse induction" — "pulse induction". In such devices, one coil is provided, "mono" (see "Type of coil"), which plays the role of both a receiver and a transmitter. The coil emits signals in separate pulses, and in between them it works as a receiver, "listening" to the response signal from the ground. Such a scheme allows you to effectively search for objects even in an environment unfavorable for electromagnetic pulses — in particular, highly mineralized soils and in salt water. The latter makes PI instruments extremely useful for marine archeology, both underwater and on wet, salty sand beaches. On the other hand, qualitative discrimination in such models is not available.

— OR. A method based on the so-called breakdown of resonance. The coil in such metal detectors is part of an oscillatory circuit, to which a signal is supplied from the generator with a frequency close to the resonant frequency of the circuit. When a metal object enters the field created by the coil, the characteristics of its inductance and, accordingly, the resonant frequency of the entire circuit change. Based on the change in resonance characteristics, the control unit determines not only the presence of metallic objects, but also, to some extent, their composition. OR-devices are simple in design and inexpensive, since they do not require precision settings; at the same time, the depth of detection and the reliability of operation in them are low, and mineralized or wet soil further worsen the performance. Therefore, this method has not received wide popularity; it is used mainly in entry-level devices.

— ZVT. Minelab's proprietary technology, developed primarily for searching for gold treasures and nuggets. The abbreviation stands for "zero voltage transmission", the principle of operation is described as "the creation of ultra-constant high-power magnetic fields of opposite polarity." Due to this, according to the manufacturer, the efficiency and depth of gold detection are significantly increased, as well as the resistance to interference is improved and it becomes possible to work even on soils with very high levels of mineralization. However, ZVT-metal detectors are quite expensive, and the possibility of working with other metals, except for gold, is usually not mentioned in the description of such devices.

Type

The design of the coil(s) of the metal detector.

— Concentric. The name of this type is due to the fact that such a coil includes two separate windings — receiving and transmitting — one of which is located inside the other. It is used in metal detectors that use the principles of VLF and VLFEX (see above). The field from a concentric coil has a small width, which determined both its advantages and disadvantages: on the one hand, due to this, it is possible to determine the location of an individual find with high accuracy, on the other hand, it takes a lot of time and effort to carefully examine vast areas. This shortcoming can be partly compensated for by the elliptical shape (see below). Also note that concentric models are quite sensitive to mineralized soils.

— Mono. The simplest type of coil, having only one winding. This option is used in PI, OR and RF devices, and in the latter case, two mono-coils must be installed. The main advantages and disadvantages of this type are similar to those described above concentric.

— D.D. Also known as Double-D. Such coils have a pair of windings in the form of the letters D, turned in different directions and arranged closely so that they form a circle or an ellipse. In terms of application, DDs are similar to the concentric coils described above, but they differ in the shape of the generated field: it is a narrow plane directed along th...e line of contact of the windings. This makes it possible to cover a fairly wide band in one pass, and also reduces the sensitivity to interference from mineralized soils. Among the shortcomings, compared with concentric ones, it is worth noting the high cost and lower accuracy in the localization of individual finds (however, the latter can be compensated by the skills and experience of the operator).

— Super-D. Coils of a specific design, consisting of three windings — a central one, which plays the role of a transmitter, and two external ones, working for reception. They were developed specifically for ZVT metal detectors (see "The principle of operation"), taking into account the features of their work.

Shape

The shape of the coil (frame) of the metal detector.

Round. The traditional form used in almost all types of ground and underwater metal detectors (see "Type"); the only exceptions are models that work according to the RF method (see "Operating principle"). When using concentric coils (see "Coil Type"), this option allows you to create a conical field, which is convenient for pinpointing the location of the find, but reduces the covered area and makes it difficult to search over a large area; models with DD coils do not have this drawback.

Elliptical. The shape in the form of a longitudinally elongated ellipse allows you to somewhat "stretch" the field created by the metal detector in length. This is especially true for coils of the concentric type — however, such an expansion somewhat reduces the positioning accuracy of individual finds. But in coils of the DD type, where the accuracy is by definition low, the choice between round and elliptical shape is most often not fundamental.

Rectangular. A specific form used in RF or PI instruments. For technical reasons, it is considered optimal for such devices, but it is practically not found in other types of metal detectors.

Butterfly. Another option used in DD coils along with the ellipse (see above). In fact, it consists of two elliptical windings..., partially combined and resembling butterfly wings in shape — hence the name. This option is typical mainly for large-sized DD coils; with a large width, it is considered more optimal than an ellipse.

Dimensions (WxD)

The size of the standard coil (frame) of the metal detector. Theoretically, the larger it is, the deeper the device is able to “see” and the more space it captures in one pass, but the worse it is suitable for searching for small objects and the lower the accuracy with which it localizes them. At the same time, these characteristics depend on so many other factors that in fact, the size of the coil itself affects them very little.

Note that for coils (frames) of an elliptical shape, only one size can be indicated — along the length.

Number of detection frequencies

The number of individual operating frequencies at which the metal detector can operate. For more on the frequencies themselves, see "Detection Frequency" below; here we note that the more options ( 3 frequencies and more) are provided in the design, the wider the capabilities of the metal detector, the easier it is to adjust it to the specifics of the objects being searched and the environment. However, most models have one frequency.

Detection frequency

The operating frequency (or frequency range) of the metal detector. This is one of the most important parameters when choosing a device, because the optimal frequency for different cases will be different — depending on the size and material of the items being searched, the characteristics of the soil and other factors. Detailed recommendations on the choice of frequency for each specific situation can be found in special sources; And already on the basis of this information, it is worth choosing a specific model.

Note that the actual frequency at which the metal detector will operate also depends on the installed coil — they are usually made for a specific frequency. Therefore, to use the full capabilities of the device with the ability to adjust this parameter, you may need replaceable coils.

Max. detection depth

The greatest depth at which a metal detector is guaranteed to be able to detect a metal object. Note that this parameter is most often quite approximate, moreover, somewhat conditional. This is due to the fact that it is usually indicated for an perfect environment (low-mineralized soil, a fairly large object, the material of which optimally matches the frequency of detection of the coil, etc.), and even for such conditions it is difficult to derive an absolutely accurate value. Therefore, in fact, the detection depth is highly dependent on a number of additional factors (from soil characteristics to user skills) and can be significantly less than indicated in the characteristics. Nevertheless, the claimed depth describes the capabilities of the metal detector quite well, and it is quite possible to compare different models with each other.

Note that a large depth not only increases the cost of the device, but can also adversely affect its ability to detect small objects.

Coin detection depth

The deepest depth at which a metal detector is capable of detecting small coins and other objects of similar size. Many users buy a device with the intention of “hunting” for metal trifles, so manufacturers often indicate this parameter separately in the specifications. Due to the small size of the coins, their detection depth is usually much less than the total maximum detection depth (see above).
Nokta Makro Legend WHP often compared
Fisher F22 often compared