Comparison Chicco Duo Stylego 2 in 1 vs Chicco Trio Activ3 3 in 1

The ability to adjust the position of the footrest, on which the legs of the baby in the pushchair rest.

A similar ability is found in some pushchairs, transformers and pushchairs of universal pushchairs (see "Design"). The footrest itself is an inclined surface attached to the front edge of the seat. Adjustable footrests are those in which the angle of inclination can be adjusted; in many models, this footrest can even be set horizontally. This makes it possible to choose the most comfortable position for the baby's legs in different situations.

In strollers with this function, the seat unit can be fixed in one of two positions, to choose from: facing the parent (against the direction of movement) or facing away from the parent (in the direction of movement). Each option has its advantages: in the first case, the baby can see a familiar face and is less nervous, and when located in the direction of movement, it is more convenient for him/her to view the world around him/her.

A window made of transparent or translucent material, built into the hood that covers the cradle or seating unit. In the version with a walking block, the viewing window is usually located so that the parent can see the baby directly while moving, without being distracted from controlling the stroller. In cradles, the parent can see the child through a window by approaching the stroller from the side of the hood (that is, on the opposite side of the handle); implementations with a window in the front hemisphere of the hood are less common. In addition, a baby lying in a cradle can usually see the outside world through the window (primarily the sky above the stroller). The viewing window can be made in the form of oilcloth or a mesh mosquito net, through the holes of which air freely penetrates, but insects and small debris raised by the wind are retained.

The number of points of support provided in the pushchair — in other words, the number of individual wheels (single or twin) on which it rests. These pushchairs are currently in production:

— 3-wheel. These models usually have one wheel in the front and two wheels in the back. One of the advantages of this design is that even on an uneven surface, all wheels will have contact with the support, none of them will sag, and the pushchair will stand stable without wobbling. In addition, 3-wheel models are lighter and cheaper than similar 4-wheel models. At the same time, they are worse to resist tipping on the side, and in general a little less reliable and durable. Therefore, such pushchairs are produced relatively few.

— 4-wheel. Traditional 4 wheels — two in front, two in the back. This design is more practical, reliable and resistant to tipping over than a 3-wheel one, which is why it is used in most modern pushchairs. However it is somewhat more expensive and heavier, but these points are generally outweighed by the benefits.

— 6-wheel. A variant found among pushchairs for twins, in which the seats are installed side by side. The traditional 4 wheels in such models are supplemented by two more wheels that are placed between the seats; these wheels provide additional support, preventing the structure from saggin...g under the weight of the kids.

— 5-wheel. A very uncommon and specific variant, also found among pushchairs for twins. In fact, such models are a simplified version of the six-wheel ones described above: in the front of such a pushchair there are three wheels (on the edges and in the middle), and only two wheels in the back (on the edges). This reduces weight and cost a bit, but it also reduces reliability, which is why 5-wheel models have not become widespread.

— Classic. U-shaped handle (or similar), which is a kind of frame. It is slightly less comfortable to hold with two hands than a double handle, but can be comfortably held with one hand.

— Double. A pair of separate handles without a bridge between them. The handles themselves are usually curved so that the parent's hands resting on them are in the best, most comfortable position. At the same time, double handles should preferably be held with two hands; it is much more difficult to handle them with one hand than with a classic handle. In addition, it should be noted that this option is considered the most suitable for pushchairs (see "Design"), while for pushchairs with a carrycot it is not very suitable.

— Universal. A design that is a combination of the classic and double handle described above. This allows the parent to choose the option depending on the situation: for example, it is more convenient to hold the stroller with two hands by the "horns", and if one hand needs to be free - you can take the single (classic) handle. At the same time, such a choice is not really necessary for everyone, and universal handles are more complicated and expensive than specialized ones, so they are much less common.

— Round. The handlebar can have a different design: in some models it is an oval loop mounted on a long...bar, in others it is a kind of "steering wheel" on a frame above the hood. Whatever the case, in some models such a handle is a round: it is directly connected to the front wheels, and when you turn the handle, the wheels turn to one side or the other. This noticeably improves maneuverability, but complicates the design and increases its price. However, there are also simpler designs, where the round handlebar differs from the classic handles only in shape. All these nuances should be specified for each model separately.

The pushchair has a hand brake.

Any parking brake (whether hand or foot brake) locks the wheels of the pushchair, preventing it from moving. This function eliminates the risk of the standing pushchair moving on its own, for example down a slope or in a gust of wind. Almost all modern pushchairs are equipped with a parking brake. Most often it is foot brake (activated and deactivated by pressing the foot), but some models provide manual control — with a lever or button on the handle. This brake is a bit more expensive than a foot brake, but it is more convenient: the control is right in front of the eyes and under the parent's hand.

— Seat unit. A seat unit serves as the child's sitting area, suitable for use from 6 – 8 months onward when the child transitions from lying in a carrycot to sitting comfortably. All pushchair types feature seat units (see "Design"), except for classic and transformer models. Classic pushchairs inherently use a carrycot, while transformers use a unique device known as a "carrycot-transformer" (see below).

— Carrycot. A traditional carrycot is a basket with high sides in which the child is lying down. Such baskets are intended for children in the first months of life - usually up to 8 months, no more; from an older age it makes sense to use a seat unit (see above). Carrycots are used in all types of pushchairs, except for pushchairs and transformers (see "Design") - the first type is completed only with seat units, the second uses the so-called " carrycot-transformers" (see below). A special kind of traditional carrycots are carrying carrycots (they are also described below).

— Carrying carrycot. A variation of the carrycot (see above) designed to be easily carried separately from the pushchair. To do this, the design provides an appropriate handle. At the same time, not every carrycot that has a carrying handle (see above) belongs to this category of accessories: "carrying" are called only those carrycots that initially allow long-term carrying in the hands...and have various design features that facilitate such transportation.

— Carrycot-transformer. In fact, it is a carrycot, which, if necessary, can be turned into a seat unit for a child who can sit up.

— Car seat. A specialized seat designed for the safe transportation of small children in cars is essential for compliance with safety regulations in many countries. Car seats are typically provided with pushchairs for babies up to 12 months and weighing up to 13 kg. However, a separate seat for older babies must be purchased. Before buying, it's important to check the specifications of the car seat, particularly the method of attaching it to the car.

— Foot cover. A cover designed to protect a child's legs in a pushchair from wind, cold and bad weather. While blankets or improvised solutions can be used for the same goal, complete covers offer more convenience as they securely attach to the pushchair and stay in place during movement. Additionally, if needed, a blanket can be placed inside the cover for extra warmth. It's worth noting that many pushchairs, lacking this accessory, allow for separate purchase. This accessory is primarily used with seat units, whereas carrycots rely on a leg-area canopy with a similar function, though it's not classified as a cover.

— Rain cover. A waterproof cover that protects the child in the pushchair from rain, snow and strong winds. Usually such a cover is made of transparent material or has transparent inserts — so that the baby can see the world around, and the parent can follow the baby. Rain covers for pushchairs are also sold separately, but if such an accessory is included in the kit, you do not have to worry about compatibility.

— Mosquito net. Mesh with small cells, which can cover a child sitting in a pushchair. The cells allow air to pass through, but trap mosquitoes, midges and other harmful insects, as well as small debris raised by the wind; such protection is especially useful during evening walks in the warm season, as well as when going out in the countryside.

— Bag / backpack for things. A separate bag that is usually hung on the handle of the pushchair. In such a bag you can keep various useful small things that need quick access: food, toys and hygiene items for the baby, parent's documents, etc. In most cases, the bag is removable, which provides additional convenience. Note that for some models, initially not equipped with a bag, such an accessory can be purchased separately. And some models are equipped with a backpack — a more convenient option for use.

— Shopping compartment. A device in the form of a basket or container installed at the bottom of the pushchair - under the cradle or seat unit. This compartment is convenient for storing purchases and other things that do not require quick access while walking. At the same time, larger and heavier items are placed in the basket/container than in a bag for things (see above); and the low position improves the stability of the pushchair. The shopping compartment can be either open or closed. The first option is found everywhere, the second - mainly in elite models (and such pushchairs can be supplied with two baskets: open and closed, or in different colors). The capacity of a closed compartment is often smaller, but the contents in it are securely hidden from prying prying eyes and protected from dust, dirt and moisture. Compartments for purchases are made from a wide variety of materials: plastic, metal mesh, fabric, etc. Soft materials are generally lighter, but less durable, hard ones are reliable, but can interfere when overcoming curbs and other obstacles.

— Cup holder. A stand on the parental handle to hold a glass or bottle with a drink - for example, milk for the baby or water for the parent.

— Hand strap. Strap on the handle of the pushchair, which the parent can put on his hand. This reduces the risk of dropping the pushchair: the strap is likely to keep it close to the parent, even if the arms are fully unclenched.

— Hand muff. An accessory that can come in handy when strolling in the cold season. The muff is attached to the handle of the pushchair; if desired, you can hide your hands in it so that they do not freeze in the cold. At the same time, the design of the muff is such that it does not interfere with fully holding the handle and driving the pushchair.

— Cover for pushchair. A protective cover designed for storing and transporting a pushchair during non-use hours is typically made from soft materials. It primarily protects the structure from dirt, direct sunlight, and moisture to some extent. While it offers symbolic protection against mechanical damage, more substantial safeguarding would require a case made of rigid materials. However, the need for such intensive protection is rare in practice. Soft covers are favored for their lightweight nature and minimal storage space when folded, making them the most popular choice for pushchairs. Overall, a complete cover tends to be more convenient, practical, and reliable compared to makeshift packaging.

The distance between the side wheels of the pushchair; this generally corresponds to the overall width of the pushchair. If the front and rear widths are different, the greatest distance is indicated, usually on the rear wheels; the same wheels are used to measure the width of three-wheeled models.

In general, the wider the chassis, the more stable the pushchair is and the more difficult it is to tip it over. On the other hand, greater width can cause problems in tight spaces such as narrow hallways and doorways, elevators, etc. The narrowest modern pushchairs have a width of up to 45 cm, the widest — more than 70 cm (these are mainly models for twins or triplets , where two seats are side-by-side). Models 46 – 50 cm are also considered quite narrow, a width of 51 – 55 cm can be called small, 56 – 60 cm — medium, 61 – 65 cm — more than average, 65 – 70 cm — large.

Dimensions of the carrycot provided in the kit.

Partly the rule "the bigger the better" works here: a large carrycot gives a good reserve for the period of growth of the baby, in winter you can put the baby dressed in warm clothes in it, and in summer the extra space in the carrycot provides good ventilation. On the other hand, large carrycots are more bulky, weigh more and cost more.