Comparison Whirlpool BSNF 9432 K black vs Whirlpool BSNF 9431 K black

The refrigeration circuit can be described as a heat sink system that has a separate connection to the compressor (see “Number of compressors”) and a separate, independent from other similar systems, regulation of the operating mode.

In the most common variety of modern refrigerators — two-chamber models with a freezer — both one common circuit for both chambers and 2 circuits can be provided. The second option is more expensive, but it gives an important advantage — in such refrigerators, you can completely independently control the operating modes of the refrigeration and freezer compartments. If there is only one circuit, these adjustments turn out to be interconnected: for example, when you turn on the fast freeze mode (see "Features"), the main chamber also starts to work at increased cooling power, which is not always desirable.

As for refrigerators with three or more chambers, usually, the number of circuits in them is less than the number of chambers — otherwise, the design would be unnecessarily complex, cumbersome and expensive.

Various special features provided in the refrigerator, such as holiday mode, control via smartphone, child lock, ( LED display or TFT display), door alarm reversible door. And now in more detail:

— Holiday mode. A special mode of operation in case of a long absence of users — when there is no foodstuff in the refrigerating chamber and there is no need for the unit to work intensively. In holiday mode, the temperature inside is maintained at about 12 °C; this prevents the growth of mould and unpleasant odours, while the energy consumption is very low.

— Control via smartphone. The ability of access to control the refrigerator via the Internet. The refrigerator, usually, is connected to the World Wide Web using Wi-Fi — via a router or a smart home system. The convenience of this function is obvious: it allows you to control the operation of the unit from anywhere in the world where there is an Internet connection. However, the specific implementation of such control may be different: some models of refrigerators use an application installed on a smartphone or tablet, and others allow you to work through a web page available in any browser. However, the user can thus obtain various data on the unit's operating mode (temperatur...e and humidity in the chambers, the use of special functions, malfunctions and emergencies, etc.) and, if necessary, change its settings.

— Child lock. Various features to keep your refrigerator safe from small children. Often, it means blocking the control panel — so that a curious baby cannot change the settings.

— Display. Refrigerators of any level can be equipped with displays — from the simplest to the most advanced. Anyway, the screen provides additional convenience in operation: it can display various detailed information about the operation of the unit, as well as other useful data (for example, time). But the specific type of display may be different.
— LED display. Usually, they are very simple — they display one colour (maximum two or three basic colours) and a limited set of characters (numbers, individual letters and some special icons). However, such limited functionality is enough even for fairly advanced refrigerators, and LED displays are inexpensive.
— TFT display. These are already the most functional screens — like those used in smartphones, tablets, etc. They are capable to display a huge variety of information and can even be made touch-sensitive. And some units with TFT displays are not just refrigerators at all but multifunctional smart home components. However, such an appliance costs accordingly.

— Door alarm. An alarm system that warns that the refrigerator door is open for a long time (or not closed tightly enough). After some time after opening, such a system gives a signal (usually sound), notifying the user of the need to check the status of the door. It avoids a critical increase in temperature in the refrigerator chamber and damage to the contents. In some models, this system is also complemented by a light indicator that confirms the correct closing of the door — this further reduces the risk of leaving the refrigerator loosely closed.

— Reversible door. The ability to choose from which side the hinges on the refrigerator door will be located and, accordingly, in which direction it will open. It allows you to optimize the space in the kitchen, providing access to the contents of the unit from the most convenient side. Please note that this function is only available for classic design models, including display refrigerators (see “Product type”). In Side-by-Side and French Door refrigerators it makes no sense to provide this feature.

Separate zones that help expand your food storage options. Among these there are multizone — , fresh zone, humidity zone, low temperature zone, wine chamber, bottle rack. More details about them:

— Fresh zone. A special compartment designed for long-term storage of fresh vegetables, herbs and other similar food. Such a compartment can be made in the form of a completely separate chamber. In such cases, it is called the zero chamber and its volume is separately indicated in the specifications. However, more often the fresh zone is located inside the main compartment. Anyway, the humidity in this zone is somewhat higher than in the refrigeration compartment, and the temperature is somewhat lower: in some models, it is about zero (which allows you to store raw meat or fish), in others it is about +1 .. .3 °C (this is only suitable for fruits, vegetables and cheeses). Anyway, the moisture from the products in the fresh zone does not evaporate as quickly as in the main chamber, and the contents retain their original appearance and taste longer. This feature is especially useful if there is a No Frost system (see above) in the refrigeration chamber of the unit.

— Humidity zone. Another feature designed for long-term storage of fresh food is similar to the fres...h zone described above. The difference is that freshness is preserved solely due to the increased humidity of the air (hence the name). The temperature corresponds to the temperature in the refrigeration chamber. The humidity zone is intended mainly for storing vegetables and fruits; in some refrigerators, this compartment has a humidity control that allows you to optimally adjust it to different types of contents (detailed recommendations on this can be found in special sources)

— Low temperature zone. A compartment in which a lower temperature is maintained than in the main chamber of the refrigerator. Typically, fresh meat or fish are supposed to be stored in the low-temperature compartment. The presence of such a compartment allows you to more effectively organize long-term storage of food in the refrigerator and keep it fresh longer.

— Multizone. A compartment that combines the functions of several compartments at once. The simplest option is the ability to work in the mode of a refrigerator or freezer. However, in modern refrigerators, there are multizones with more extensive capabilities. These features can be quite specific — like quickly cooling drinks, slow defrosting, and even cooling hot dishes. So the specific features of the multizone should be specified separately. Nevertheless, its presence significantly expands the capabilities of the refrigerator. Also, in some models, the entire freezer performs the function of such a chamber. However, most often the multizone is still designed separately from other chambers.

— Wine chamber. Specialized compartment for long-term storage of wine. Usually, a temperature of +10..12 °С is maintained in such a compartment — it is this temperature considered optimal for this task. Some models may also provide the possibility of more precise temperature settings — for different types of wine. The traditional equipment of a wine chamber includes a shock-absorbing system that dampens vibrations from the compressor and other shocks, as well as carbon filters to protect against foreign odours; and the door of such a chamber is traditionally made transparent — so that you can see the collection of wines without opening the refrigerator.
Nowadays, this function is found only in some premium refrigerators. It is because most wine connoisseurs prefer to use specialized wine coolers: such devices are less bulky and often more functional.
— Bottle rack. Shelf of a special design for the convenience of storing bottles in the refrigerator. It has the form of stands of a wavy shape. In the recesses of such "waves" it is convenient to keep bottles of small or medium size: they do not roll over the refrigerator and are at hand; you just need to open the door.

Indoor lighting based on built-in light-emitting diodes (LED) has several advantages over more traditional bulbs. Firstly, due to its high efficiency, it gives excellent brightness with low power consumption and also generates almost no heat. Secondly, small LED lamps can be evenly distributed along the walls of the chamber, providing bright illumination of the entire volume of the refrigerator. The disadvantages of such lighting can only be attributed to a certain difficulty in repair and replacement. However, modern LEDs are quite durable.

Forced freezing mode, in which the temperature inside the freezer falls below the standard level for a short time. This mode is useful when loading a large amount of unfrozen food into the freezer. The fact is that the heat from these products can lead to an increase in the temperature inside. The fast freeze feature allows you to compensate for this phenomenon and avoid violations of the temperature regime. However, fast freeze, usually, needs to be turned on a few hours before loading new food, and the freezer is usually not designed for permanent operation in this mode, after a while, it needs to be switched to normal mode (in some refrigerators this is done automatically) .
We also emphasize that some units provide separate boxes or zones of “fast freezing”, with a lower temperature. Such equipment is not considered for the fast freeze feature since it has slightly different specifics of work.

Refrigerator energy class according to the old European standard valid until 2021.

The energy class shows how economical the unit is compared to other models with similar specifications. It is used for devices manufactured before March 1, 2021. Initially, in this standard, classes were designated in Latin letters from A (most economical) to G (high power consumption). However, later improved classes A+, A++, and others appeared. (the more pluses, the more effective is the device). For modern refrigerators, marking A according to the old system is actually the minimum level of energy efficiency specific for outdated and low-cost devices; most models are classified as A + and A ++, and most A+++. There is no need to wait for more pluses. Since 2021, all new equipment will be marked according to the new system, where class G will correspond to the old class A, class F to class A+ and so on.

Note that a higher energy efficiency class (with similar specifications) means a higher price but this difference can quickly pay off due to energy savings.

The average amount of energy consumed by a refrigerator in a year of operation. Of course, these figures are not absolutely accurate; the actual power consumption may vary depending on the specific operating conditions. However, this parameter makes it possible to evaluate the power consumption of the refrigerator and compare different models with each other. At the same time, it often turns out to be more convenient and visual than the energy consumption class (see above) because in this paragraph we are talking about a specific figure (from which you can also calculate the cost of electricity consumed). For clarity, let's take the following example: a small two-chamber refrigerator with energy class A can consume less energy per year than a large side-by-side unit of class A+++, although formally, in terms of energy consumption classes, the second model will be more economical than the first.