Comparison Xiaomi Piston Fresh Bloom vs Xiaomi Mi Quantie Hybrid Pro

The type of cable provided in the design or package of the headphones. Note that this parameter is relevant both for wired or combined models (see "Type of connection"), and for some wireless models - in particular, earbuds and in-ear headphones without attachment, where the wire connects one earphone to another.

- Round. Classic round wire - straight, without braid and other additional devices. It is inexpensive and in most cases quite practical, which is why it is found in most modern headphones. The disadvantage is that with a small thickness, the round wire tends to tangle; therefore, this option is considered not very convenient for compact headphones, such as in-ear or in-ear headphones (see "Design"), which often have to be carried in a pocket or bag.

- Flat. The main advantage of a flat cable is that it is not as tangled as a round one, and in which case it is much easier to unravel. This is especially important for earbuds and in-ear headphones, which are often rolled up for storage or portability. However, larger overhead models can also be equipped with a flat wire.

- Drawstring around the neck. A wire adapted in one way or another to be worn around the neck - for example, having the form of a loop from which two separate headphones depart. The main advantage of this design is the convenience for constant wear: if necessary, you...can remove the headphones and leave them hanging on a cord, and then quickly put them back on. It is worth noting here that this option is found mainly among liners and in-ear models, for which the mentioned advantage is especially relevant.

- Round, braided. Round wire, supplemented with an outer braid - usually fabric. See above for more details on round wire. And the presence of a braid gives such a cable a number of advantages over the classic, in "bare" insulation. So, the wire turns out to be more durable, reliable and resistant to kinks and pressures, less confused, has a solid appearance, and in some models the braid also provides shielding from external interference. The reverse side of these advantages is the increased price.

- Spiral. Round cable, coiled in the form of a spring. The main advantages of spiral wire are that it practically does not tangle and can be noticeably stretched relative to its original length. The latter is very convenient if in the course of using the "ears" you have to change the distance to the signal source. The disadvantages of a spiral cable are bulkiness and relatively high cost. Therefore, it is often used in headphones of medium and top levels (including professional models).

- Round, braided. Cable in the form of two wires twisted into a spiral. Do not confuse this option with a spiral wire - in this case we are not talking about a spring. Such a cable is notable primarily for its unusual appearance; for greater originality, the wiring can be made multi-colored. It is also slightly more tangle-resistant than the classic round, although much depends on the thickness here. At the same time, individual wires can be noticeably thinner than a solid round wire, which somewhat reduces reliability.

- Zipper. Reversible wire (see "Cable entry"), in which the individual wires are hidden inside the halves of the zipper. The fastener does not cover the entire length of the cable, but usually takes up half, or even more. The headphones themselves with a similar wire most often belong to miniature varieties - in-ear or in-ear. Such models are very convenient in “packing” and “unpacking” for storage and carrying: by zipping up, you can connect two wires into one, and when you need the headphones again, you can unzip them by separating them. At the same time, the fastened zipper is very resistant to tangling. Yes, and this accessory looks quite unusual.

- In the form of a lace. A wire that looks like a lace - like tech used in shoes or clothing. Do not confuse such a cable with a cord around your neck (see above) - in this case, we mean not the way the wire is worn, but a specific type of braid. Such a wire is comparable in width to a flat wire, due to which it resists tangling well. However, the main advantage of this option is still the original appearance: “laces” are often made in bright colors, can be painted in several colors, complemented by a pattern, etc.

The diameter of the speaker installed in the headphones; models with multiple drivers (see "Number of drivers"), usually, the size of the largest speaker is taken into account, other dimensions can be specified in the notes.

In general, this parameter is relevant primarily for over-ear headphones (see "Design"). In them, emitters can have different sizes; the larger it is, the more saturated the sound is and the better the speaker reproduces the bass, however, large emitters have a corresponding effect on the dimensions, weight and price of the headphones. But in-ear "ears" and earbuds, by definition, have very small speakers, and rich bass in them is achieved due to other design features.

The type of sound emitters installed in the headphones. The type determines the principle of operation of emitters and some features of their design.

— Dynamic. The simplest type of emitters operating on the principle of an electromagnet. Due to the combination of low cost with quite decent performance, it is also the most common, especially among entry-level and mid-range headphones. Such an emitter consists of a magnet, a coil placed in its field, and a membrane attached to the coil. When an alternating current (signal) enters the coil, it begins to vibrate, transmitting vibrations to the membrane and creating sound. From an acoustic point of view, the main advantages of dynamic radiators are a wide frequency range and good volume, the disadvantage is a relatively high probability of distortion, especially with a worn membrane.

— Reinforcing. A peculiar modification of dynamic emitters (see the relevant paragraph), used mainly in high-end in-ear headphones. The basis of the design of such a radiator is a U-shaped metal plate. One of its ends is fixed motionless, the second, movable, is located between the poles of a permanent magnet, and a coil is wound around it (closer to the crossbar), through which the signal current passes. Vibrating under the action of this current, the movable part of the plate transmits vibrations to a rigid membrane, with which it is connected by a thin need...le. This technology allows you to achieve good volume and low distortion with a very small size of the earpiece itself. The disadvantages of reinforcing radiators, in addition to high cost, are uneven frequency response and a relatively narrow frequency range. However, in expensive headphones of this type, several emitters can be provided at once, including on a hybrid basis (see relevant paragraph).

— Hybrid. Hybrid devices are usually called devices that combine dynamic and reinforcing emitters. See above for more details on these varieties; and their combination is used to combine advantages and compensate for disadvantages. Usually, in such headphones there is only one dynamic emitter, it is responsible for low frequencies, and there can be several reinforcing ones, they share the midrange and high frequencies. This allows you to achieve a more uniform frequency response than in purely armature models, but it significantly affects the price.

— Planar. The design of emitters of this type includes two powerful permanent magnets, between which there is a thin film membrane. The shape of the headphones themselves can be either round (orthodynamic emitters) or rectangular (isodynamic). According to the principle of operation, such systems are similar to dynamic ones, with the adjustment for the fact that there is no coil in the design — its role is played by the membrane itself with applied conductive tracks, to which the audio signal is fed. Due to this, distortions associated with the uneven oscillations of the membrane are practically absent; in addition, the sound as a whole is clear and reliable, and the frequency response is uniform. The main disadvantages of planar magnetic headphones are high cost, increased requirements for signal quality, and rather large dimensions. In addition, they are somewhat inferior to dynamic ones in terms of volume and overall frequency range.

— Electrostatic. Like planar-magnetic (see the relevant paragraph), such emitters are designed according to the "sandwich" principle. However, the membrane in them is located not between the magnets, but between the metal grids, and is made of a very thin metallized film. An audio signal is connected to such a system in a special way, and the membrane begins to oscillate due to attraction and repulsion from the grids, creating sound. Electrostatic drivers achieve very high sound quality, low distortion, and high fidelity, but they are bulky, complex, and expensive to use. And it's not just the high cost of the headphones themselves — their operation requires additional matching amplifiers with a voltage range of hundreds or even thousands of volts, and such devices cost a lot, and have the appropriate dimensions.

The number of emitters installed in each individual earphone. Specified only for models with more than one emitter.

The meaning of this feature depends on the type of emitters (see above). So, in hybrid models, by definition, there are several — the frequency range is distributed between them, which has a positive effect on the frequency response. For the same purpose, several reinforcing radiators can be used. And with the traditional dynamic principle of operation, due to several emitters, the effect of surround sound can also be provided (see "Sound").

Anyway, "ears" with numerous emitters, other things being equal, will be more advanced, but also more expensive.

The headphones have their own volume control. Such a regulator can be placed both on the wire and on one of the cups (the latter is typical for wireless models). Anyway, this function allows you to easily adjust the volume: for this you do not need to go into the computer settings, press the buttons on the player or smartphone, etc., just use the control at hand. On the other hand, additional equipment complicates and increases the cost of the design, and also increases the likelihood of distortion. In light of the latter, volume control is almost never found in professional headphones.