United Kingdom
Catalog   /   Tools & Gardening   /   Power Tools   /   Power Saws

Comparison Zenit ZSP-1300 vs Pro-Craft PSS1800

Add to comparison
Zenit ZSP-1300
Pro-Craft PSS1800
Zenit ZSP-1300Pro-Craft PSS1800
Outdated ProductOutdated Product
TOP sellers
Product typereciprocatingreciprocating
Typeportableportable
Power sourcemains (230 V)mains (230 V)
Motor
Engine locationlongitudinallylongitudinally
Power1300 W1800 W
Cutting equipment
Cutting depth120 mm115 mm
Steel cutting depth6 mm3 mm
Stroke20 mm20 mm
Max. stroke rate2800 spm2700 spm
Features
Features
keyless
speed controller
keyless
speed controller
General
Weight2.8 kg3.2 kg
Added to E-Catalogfebruary 2018august 2017

Power

Saw motor power in watts. For petrol tools (see "Power Source"), horsepower is additionally indicated, see below for details.

The higher the power, the better the tool is suitable for voluminous work and hard materials, the greater the depth of cut it can provide and the easier it can cope with significant loads. In addition, for different types of saws and different types of materials, the actual power values \u200b\u200bcan also be different. For example, a power of 2.5 – 3 kW is actually the limit for chain saws, but in chain saws this is an average figure, among such tools there are models of 3 – 4 kW and even more. Detailed selection recommendations for various cases can be found in special sources.

Cutting depth

The greatest depth of cut provided by the saw.

In most types of saws (see “Device”), the depth of cut directly depends on both the engine power and the size of the tyre / disk. The specifications give a value for the maximum allowable size of the working nozzle; when using nozzles of a smaller size, the depth of cut, respectively, will be less. But in band saws, this depth is rather weakly related to the actual length of the tape — it is determined primarily by the length of the open section of the tape, which is directly involved in the work.

Anyway, the greater depth of cut makes the tool more versatile, but comes at the cost of weight, price, and electricity/fuel consumption. So when choosing, it is worth considering the real features of the planned work and the dimensions of the workpieces that are planned to be cut. As for specific values, the most modest tools provide a depth of up to 50 mm ; 50 – 75 mm is considered a low indicator, 75 – 100 mm is average, 100 – 125 mm is above average, 125 – 150 mm is already quite an impressive thickness, and the most powerful modern saws can have a cutting depth of more than 150 mm.

Steel cutting depth

The greatest thickness of steel workpiece that a reciprocating saw can handle. Note that in practice, the maximum cutting depth will depend on the grade of steel and the characteristics of the material. It is not recommended to exceed the declared indicators - this is fraught with undesigned loads on the tool with all the ensuing consequences.

Max. stroke rate

The highest frequency of blade strokes provided by a reciprocating saw (see "Device") in normal operation. A higher frequency, on the one hand, increases productivity and provides a more accurate cut, on the other hand, it increases the load on the blade and requires a rather high power.

Weight

The total weight of the tool. For petrol models (see "Power Source"), usually, dry weight is indicated, excluding fuel.

In general, it makes sense to pay attention to this parameter primarily when choosing a hand tool. At the same time, note that higher power, a more capacious battery or a capacious tank will inevitably affect weight. However, tools with similar characteristics can and do differ markedly in weight. And here it is worth considering that a lighter model will be more comfortable to work with, but weight reduction may affect reliability and/or cost. In addition, a more massive tool is more stable, it is not so prone to jerks under uneven loads. If we talk about specific numbers, then a weight of 3 kg or less is considered very light, 3–5 kg is relatively small, 5–7 kg is medium, 7–10 kg is significant, and some powerful tools (mainly gasoline) weigh and over 10 kg.

As for stationary saws, weight is of secondary importance for them — it mainly affects the ease of transportation.
Zenit ZSP-1300 often compared