Comparison Sigma RC MOVE vs Polar FT7

Measurements and calculations that can be carried out with the device.

— Heart rate. Heart rate measurement in real-time is a crucial feature for devices with a heart rate monitor function and is primarily the main function for heart sensors and pulse oximeters. In fitness, heart rate is a key parameter, aligning with various training goals such as fat burning, maintaining shape, or cardiovascular strengthening. Many models can also detect critical situations like heart rhythm disturbances or excessive heart rate, providing user warnings. However, it's important to note that not all heart rate monitors or combined devices offer continuous monitoring; some models require touching the sensor for measurements. Therefore, for constant pulse data, ensure the selected device supports continuous monitoring.

— The level of oxygen in the blood. The pulse oximeter function measures blood oxygen saturation levels using a specialized sensor in a non-invasive manner, without puncturing or damaging the skin. It's important to acknowledge that the oxygen level sensor is not a certified medical device. However, it effectively responds to critical decreases in saturation, such as those experienced by climbers at high altitudes or individuals with specific respiratory conditions.

— Perfusion Index (PI). A parameter found exclusi...vely in pulse oximeters (see “Type”). Perfusion Index (PI) is a measure of blood flow in the finger being measured. The PI indicator is measured as a percentage and can vary from 0.3 to 20%. A value in the range of 4 – 7% is considered normal. If you deviate from this range, the saturation measurement results may be distorted.

— Number of steps. Step count measures the number of individual steps taken by the user, aiding in achieving recommended activity levels for a healthy lifestyle, fitness, or physical therapy. The function calculates steps taken in various ways, such as recording results for multiple sessions or days, displaying total and average numbers, remembering target values, and signaling their achievement. It's important to note that not all devices with a pedometer function (refer to "Type") support step count measurements. Some devices, designed for professional sports where movement speed is crucial, may prioritize other metrics over step count.

— Distance travelled. The function measures the total distance covered by the user. Basic models calculate distance in real-time, while more advanced ones can summarize results and work with target values. There are two main measurement methods: classic pedometers determine distance by multiplying the number of steps by the set step length (refer to "Individual settings"), while models with GPS use satellite navigation data (see "Features"). The first method has a larger error, but it's often not critical. The second method is more accurate but is costlier and may not work well in areas with weak satellite signals, such as dense urban areas or indoors.

— Movement speed. Measurement of the current movement speed. Like the distance traveled, this indicator can be calculated in two ways — by the number of steps or by data from the GPS module; see above for details on both methods. The simplest measurement option provides measuring the speed only at the current time, however, additional features may be provided — for example, building a schedule for a workout.

— Energy expenditure (calories). The function measures the amount of energy expended during a workout, commonly referred to as "burned calories". Monitoring energy consumption is crucial in weight management training programs as it helps track metabolism. However, it's essential to note that modern heart rate monitors and pedometers do not directly determine actual energy consumption. Instead, they estimate the number of calories based on factors such as heart rate, movement speed, number of steps, user's personal characteristics (refer to "Individual settings"), and other indirect parameters. Despite being approximate, these calculations are generally accurate enough for practical application.

— The amount of burning fat. The function calculates the amount of burned fat during a workout, typically measured in weight units such as grams. Similar to energy consumption, the device doesn't directly measure the actual fat burned but estimates it from various auxiliary data. The accuracy of these measurements is relatively low, and this parameter is not a primary focus in fitness. However, tracking the amount of fat eliminated can serve as additional motivation for users.

— Average/maximum heart rate. Calculation of the average and maximum value of the heart rate for a certain period of time (usually for one training session). These calculations are based on general information about the heart rate; about its meaning, see above.

— Activity time. The function measures the total duration of the user's physical activity, specifically recording only the time during which the device sensors detect the activity. Breaks in sessions are excluded from the recorded time. For instance, if you walked 1000 steps in 20 minutes with a 3-minute break, the recorded activity time would be 17 minutes. This feature distinguishes it from a regular stopwatch (refer to "Features") and enables accurate tracking of the duration and intensity of training loads.

— Clock. Classic clock — a function of displaying the current time. The clock provides not only time tracking, but also some other features — for example, they are mandatory for devices with an alarm clock (see below).

— Alarm clock. The presence in the device of the alarm clock function — the sound signal at a specified time. In the simplest models, this signal can only be programmed for one specific time, more advanced devices allow you to remember several alarms, and if you have a calendar (see below), you can also set them on certain days (for example, only on weekdays or even on specific dates) .

— Calendar. The device includes a calendar function, displaying at least the current date, and some models may offer advanced features like viewing monthly dates in table form. Calendar data is often used by other functions, ranging from the built-in training diary to the alarm clock.

— Stopwatch. The device can function as a stopwatch, measuring time intervals with high accuracy, down to tenths or even hundredths of a second. The stopwatch starts and stops at the user's command, and many models offer special measurement modes, including recording intermediate results or the time of each individual lap. This makes stopwatches significantly mor...e convenient for measuring time intervals than regular watches.

— Timer. The ability to operate the device as a timer — that is, in the countdown mode, with a signal at the end of the specified segment. This feature will be useful when performing exercises that are clearly limited in time: setting a timer and waiting for a signal is more convenient than constantly looking at the clock.

— Lap counter. The device has the capability to record data (time, speed, calories burned, average heart rate, etc.) for each individual lap, such as during running. Typically, this is achieved with a designated "Lap" button that, when pressed, captures data for that lap and initiates a new countdown. This function enables monitoring of training dynamics, identifying the most effective laps, while simultaneously recording overall training data. Some devices also offer a lap countdown feature, where the user sets a specific number of laps, and the device signals the end of the workout after that set number is completed. This simplifies the process of tallying the total number of laps.

— Multisport. The device includes a "multisport" function designed to enhance usability during multisport activities — training or competitions involving various sports stages. While non-specialized devices can be used for such activities, those with the dedicated "multisport" feature offer greater convenience. Optimized for this mode of use, they feature built-in software modes like "Running" or "Rowing" that can be easily switched between. These devices save complex data in a format conducive to further processing and analysis.

Personalized settings enable users to tailor the device to their individual characteristics. Modern fitness devices often incorporate the following customization options:

— Gender. Ability to set the gender of the user. With the same age, height and weight, the male and female bodies still differ in metabolic characteristics, optimal heart rate values and some other significant parameters.

— Age. Ability to set the user's age. This indicator primarily affects the general condition of the body and its ability to endure high loads (although these points also depend on other factors, ranging from physique to physical fitness, previous diseases, etc.).

— Weight. The option to input user weight is used in calculating optimal heart rate, energy expenditure, and fat burned (refer to "Possible measurements"). When combined with height, it provides insights into physique specifics and the need for weight management.

— Height. Ability to set the user's height. This indicator is practically not used on its own — it is usually used in combination with weight (see above) when determining physique. In addition, some pedometers (see “Type”) can calculate stride length from height data (although this setting is more common, see below).

— Step length. Ability to manually set the user's average step length. The main scope of this data is the calculation of the distance traveled in pedometers (see "Possible measurements")....

— Individual training area. Users can manually define an individual training zone, specifying the desirable heart rate range during exercise, with a warning signal for exceeding it. While many fitness gadgets can automatically calculate an optimal range based on workout goals and individual settings, certain situations, such as recovery after illness or exceptional physical fitness, may require specific considerations. Some devices with a heart rate monitor function enable users to manually set a personalized training zone, factoring in all relevant parameters.

Data transfer standards supported by the device.

— Wi-Fi. Originally designed for computer networks and internet access, Wi-Fi is now commonly used for direct communication between devices, notably in fitness devices. While internet connectivity is possible, it's typically for specific tasks like firmware updates or saving data to network storage. The prevalent Wi-Fi version, 802.11n, theoretically offers a communication range of up to 100m indoors and 200m in open areas (though real-world figures are more modest). Newer generations boast even greater ranges. Wi-Fi modules are essential in various portable electronics like smartphones and tablets, but it tends to be less power-efficient compared to Bluetooth and ANT+.

— Bluetooth. Developed as a universal standard for direct device-to-device connectivity, Bluetooth technology comes in several compatible versions. The latest version, Bluetooth 4.0, offers a connection range of up to 100m and incorporates a low-energy communication standard, making it more energy-efficient than Wi-Fi. This efficiency is especially beneficial for compact electronics like heart rate monitors and pedometers with limited space for a sizable battery. However, Bluetooth modules are somewhat less common than Wi-Fi, with certain tablets and laptops lacking support. This is a consideration when selecting a model with this data transfer method.

— ANT+. Designed specific...ally for sports equipment and remote control applications, ANT+ is a low-power wireless transmission technology. It facilitates connections between heart rate monitors or pedometers and various devices, including exercise machines, smartphones, and tablets. For devices with USB On-The-Go support, communication is possible through a special adapter. Higher-priced models may have built-in ANT+ support, eliminating the need for additional equipment.

The device has its own built-in memory.

Almost every sophisticated electronic device has a certain amount of memory, but here we specifically refer to permanent memory. This type of memory is ideal for long-term data storage, ensuring information is retained even during power outages. Its presence enables the device to operate autonomously, storing training logs, individual settings, and other essential data without the need for communication with other devices.

The device has the capability to connect to a PC, typically through a wired USB interface. This connection serves an auxiliary role, occurring outside of workout sessions, such as between workouts. It is utilized for various purposes, including saving collected data on a computer, adjusting settings, updating firmware, etc. The specific functionalities depend on the model of the heart rate monitor or pedometer.