Comparison JBL Clip 3 vs JBL Clip 2

— Bluetooth. Wireless technology for transmitting sound from mobile phones, tablets, etc. Allows you to connect a device wirelessly at a short distance from the signal source. The quality and overall capabilities of Bluetooth vary depending on the version:

Bluetooth 4. Each version brings improvements relative to the previous one. So in version 4.0, three standards were actually combined: traditional Bluetooth, a high-speed channel and an energy-saving mode for small amounts of data. This allowed us to optimize channel usage and battery consumption. In version 4.1. Noise immunity has been enhanced when working next to 4G LTE modules. And version 4.2 introduced mainly general improvements in speed and security.

Bluetooth 5.0. One of the most important innovations of the Bluetooth 5.0 standard is the expansion of the capabilities of the BLE (Bluetooth Low Energy) mode: if necessary, the device can increase the range by reducing the speed, or speed up transmission by reducing the range. In addition, a number of improvements have been introduced regarding simultaneous work with multiple connected devices.

- Bluetooth 5.1. A significant upgrade in version 5.1 was the ability to accurately position the signal transmitter (receiver). If previous versions could only determine distance, then version 5.1 can also determin...e direction. Thus, navigation began to function better and more accurately, which improved work with the smart home system, searching for connected devices, etc. In addition to this, the improvements again concerned saving energy consumption and simultaneous work with several connected devices.

- Bluetooth 5.2. The next update, after 5.1, is Bluetooth 5th generation. The main innovations in this version are a number of security improvements, additional optimization of power consumption in LE mode and a new audio signal format for synchronizing parallel playback on multiple devices.

— Bluetooth 5.3 The Bluetooth v 5.3 wireless communication protocol was introduced at the dawn of 2022. Among the innovations in it, they accelerated the process of negotiating a communication channel between the controller and the device, implemented the function of quickly switching between the operating state in a low duty cycle and a high-speed mode, and improved the throughput and stability of the connection by reducing susceptibility to interference. When unexpected interference occurs in Low Energy mode, the procedure for selecting a communication channel to switch from now on has been accelerated. There are no fundamental innovations in protocol 5.3, but a number of qualitative improvements are evident in it.

- Bluetooth 5.4. The version was presented at the beginning of 2023, the range and data exchange speed were increased. Also in Bluetooth v 5.4, the energy-saving BLE mode has been improved. This protocol uses new security features to protect data from unauthorized access, has increased connection reliability by selecting the best channel for communication, and prevents connection losses due to interference.

—Mini-Jack (3.5 mm). Standard Aux audio input for connecting speakers to an audio source, such as a laptop or smartphone.

- USB. The presence of a USB connector allows you to connect a flash drive, mobile phones, MP3 players and other similar peripherals to the portable speakers. Accordingly, such models have a built-in player and allow you to use connected gadgets exclusively as a drive.

- Card reader. Like the USB described above, this item implies the presence of a built-in player in the acoustics. And the card reader allows you to use memory cards as a drive on which songs will be recorded.

— FM receiver. A built-in tuner allows the speaker system to work as a full-fledged FM radio receiver - this is the range that is popular among music radio stations (in particular, due to the ability to broadcast sound in stereo format).

The ratio of the level of the useful signal (the actual sound being reproduced) to the level of extraneous noise provided by the speaker amplifier in normal mode.

Any amplifier inevitably creates its own noise; You cannot get rid of them, but you can reduce their level. The higher the signal-to-noise ratio, the cleaner the sound will be, the less noticeable extraneous interference will be. However, it is worth keeping in mind that the signal-to-noise ratio is far from the only parameter that affects sound quality, and its high value does not guarantee pleasant sound from the speakers.

The presence of a passive radiator in the design of the speaker system.

Such an emitter is a speaker cone that does not have its own coil and magnet — in other words, it does not produce sound itself, but only vibrates from the sound of other speakers. Like the phase inverter (see above), this part is intended to improve sound pressure and sound depth, especially at low frequencies; at the same time, the advantage of a passive radiator is the absence of a tube, due to which the design is simpler and more compact than with a phase inverter.

The total power of all channels of the speaker system. The higher the power, the larger the size of the room in which the audio system can be used, however, more powerful portable speakers usually have larger dimensions and weight.

The model supports the ability to synchronize the operation of several speakers connected to one signal source. This solution allows you to realize truly stereo sound, improve the quality and power of sound reproduction, and also expand the stereo panorama. The only thing is that both speakers must support the appropriate connection type. Different brands may have their own technologies for combining speakers (JBL Connect, JBL PartyBoost, Sony Party Chain), or maybe a universal TWS.

Theoretically, a higher capacity allows to achieve greater battery life, but in fact, the operating time also depends on the power consumption of acoustics — and it can be very different, depending on the characteristics and design features. So this parameter is secondary, and when choosing it is worth paying attention not so much to the battery capacity, but to the directly claimed operating time (see below).

Operating time of a portable audio system without connecting to an external power source (network or USB port, depending on the capabilities). Note that manufacturers tend to indicate battery life in their specifications under optimal conditions for energy saving: at low volume, without using additional functions, etc. Therefore, in fact, this indicator may be noticeably lower than the claimed one, and speakers with a long operating time will not sound at full volume for the specified hours.

The time it takes to charge a fully discharged device to 100% charge.