Comparison Best Scooter 83325 vs Explore Stunt Step

— Scooter. Scooters of a traditional design are a deck with a handlebar mounted on wheels of a relatively small diameter. In other words, this category includes all models that do not belong to more specific varieties.

— Kickboard. A type of scooter that has two wheels in front, and the steering wheel for turning does not need to be turned, but tilted in the appropriate direction. Thanks to three points of support, kickboards are more stable than classic scooters and are well suited for initial learning to ride; in fact, most of these products are designed for a younger age.

— Stunt scooter. A variety of classic scooters designed for sports stunt riding. The main distinguishing feature of such models is increased strength: the frame is made of metal, a one-piece handlebar without adjustment and folding. Also, such scooters can be equipped with pegs and other elements for a stunt programme. However, such models cost accordingly.

— Bicycle scooter. Scooters with bicycle-type wheels: large, with spokes and inflatable tyres. This greatly increases the cross-country ability and allows you to ride even on dirt paths and other uneven terrain. Note that you should not confuse such products with pedal-less bicycles (balance bikes): in this case, we are talking about a variety of sco...oters.

— Trike. The main distinguishing feature of the trikes is the presence of two separate platforms, under each leg. There are three wheels, respectively — one in front and one on the back of each platform. Riding on such a scooter differs from the classic one in that the legs can constantly stand on the platforms. Moving forward in different models is carried out in different ways. One of the options is scooters, where you need to swing from side to side; accordingly, it will not work to drive strictly in a straight line on them — the trajectory of movement will be undulating, and wobbling. Another variety is the so-called "scissors": platforms can move and move apart, like scissor blades, which ensures forward movement.

— Snow scooter. Scooters were originally designed to move on snow. According to the device, they are similar to ordinary scooters. However, instead of each of the wheels, a small ski is installed; in addition, frost-resistant materials are used in the design. At the same time, many snow scooters allow the replacement of skis with wheels and can also be used in the warm season.

— For drifting. Scooters specially designed for driving with the active use of controlled skids. Outwardly, they are similar not so much to scooters as to electric tricycles, they have a seat and three wheels — a front (steering) and two rear ones. When driving, the rider's legs are on the steps and do not touch the ground, traction is provided by an electric motor on the front wheel, and the rear wheels are usually made swivel (as in supermarket carts) and can turn around in the course of skidding. This design allows you to easily and safely perform tricks using drift. And the most advanced and speedy models, designed for professionals, have more traditional rear wheels, without the ability to turn.

The minimum age at which a child can be entrusted with a scooter. These recommendations are quite approximate, but it is highly not recommended to deviate from them. In the case of electric scooters (see "Type"), it is worth considering that in some countries, to control such devices, you need rights obtained from a certain age; so when buying a similar model, it's ok to clarify the requirements of traffic rules.

The allowable load directly depends on the age group; according to this criterion, modern scooters can be divided into children's(permissible load up to 50 kg), teenage(from 50 to 80 kg), and adults(80 kg or more).

The diameter of the front wheel(s) of the scooter.

This parameter is selected by the manufacturer depending on the type, age category and general purpose of the scooter. If we compare similar models with different wheel diameters, then it is worth considering that the larger the wheels, the better they work on the bumps in the road, and the higher the cross-country ability. And small wheels, in turn, are great for smooth asphalt and dynamic driving, they easily accelerate and allow you to make sharp turns.

The diameter of the rear wheel(s) of the scooter. See "Front wheel diameter" for details on the value of this parameter.

— Polyurethane. Wheels with solid polyurethane tyres. This material provides good cushioning, high-quality grip and, at the same time, good rolling; it is resistant to temperature extremes and damage, durable, while it is inexpensive. Due to this, polyurethane wheels are the most popular nowadays, they can be installed even in fairly advanced models of scooters — in particular, sports ones.

— Rubber. In this case, we mean wheels with a solid rubber tyre (inflatable wheels are moved to a separate category). According to the main characteristics, rubber is similar to the polyurethane described above, and in some moments even surpasses it. So, such tyres do not make noise, smooth out the roughness of the asphalt well, have excellent grip and provide high braking efficiency. On the other hand, this material is less durable and does not tolerate temperature extremes, and therefore is used much less frequently.

— Silicone. Wheels with a solid tyre made of silicone. These tyres are quite soft; this, on the one hand, worsens the rolling compared to the same polyurethane, on the other hand, it provides excellent cushioning. At the same time, silicone is short-lived and wears out quickly, especially under high loads; therefore, wheels made of this material are quite rare and are considered suitable mainly for children's scooters.

— Plastic. Plastic has a low cost, besides, it can be given almost any colour. On the other hand, hard plastic wheels do not provide cushioning, are very noisy and generally not suitable for fast driving. Therefore, this material is found exclusively in models for kids; while the overall quality and reliability of plastic is highly dependent on the price category.

— Inflatable. The most advanced type of wheels are found in modern scooters. Wheels of this type have an inflatable tyre (as in bicycles), which provides excellent shock absorption and good grip. The disadvantages of inflatable tyres, in addition to the price, include sensitivity to punctures and increased maintenance complexity: you need to monitor the pressure and, if necessary, inflate the tyre.

Bearings that the scooter is equipped with. This paragraph usually indicates not the model/brand, but the class of bearings according to the ABEC standard. Standard options for modern scooters are ABEC 5, ABEC 7, and ABEC 9 ; the higher the number, the higher the quality and accuracy of the part.

There is an opinion that better bearings allow you to accelerate better and go faster. This is partly true, but acceleration and speed are highly dependent on a number of other points — the size and material of the wheels, the weight of the scooter, etc. So models with bearings of the same class can differ markedly in speed characteristics. But what this indicator unambiguously affects is durability and price: high accuracy affects the cost, but such bearings last longer and carry loads better.

Also note that for relatively simple use, ABEC 5 class bearings are quite enough. It makes sense to specifically look for a model with ABEC 7 or ABEC 9 only if you need a scooter for advanced stunts or professional high-speed riding. However, if the selected model has high-quality bearings, it will not be worse from them anyway.

— Rim. The rim brake is considered the simplest type of braking system. Such brakes provide a smooth deceleration and a complete stop of the scooter at an average speed. The stopping distance is usually medium or long. The rim brake is characterised by pads, which, using a special mechanism, are pressed against the wheel rim. The pads themselves are driven by a lever which is placed on the handlebar. Among the advantages of a rim brake are low price and simple design. And drawbacks are fairly quick wear of the pads and the need to adjust the brakes as the friction linings wear out. Additionally, when using a scooter with a rim brake, be aware that the pads become less grippy if the rim is wet. In rainy, cloudy and slushy weather, the rim brake cannot be relied upon.

— Disk. Disc type brakes are considered more advanced than rim (shoe) systems. The disc brake allows the scooter to stop quickly enough, and the braking distance itself can be either minimal or medium. Such brakes are represented by a friction clutch that acts on a small-diameter disc. The disc is attached to the wheel axle. The clutch is pressed against the brake disc with a sufficiently large force, which allows the disc brakes to be effective even when wet on the clutch. The disc brake is controlled by a lever that is placed on the steering wheel. The advantages of a disc brake for a scooter are reliability, durability and the ability to stop quickly. Among the shortcomings, we highlight the high...price and the need to adjust as the friction clutch wears out.

— Drum. Drum brakes slow down well and provide a fairly quick stop. In terms of efficiency, the drum brake for a scooter is between the rim and disc brake systems. The drum brake uses pads that are located inside the rim. In this case, the friction plates act on the inside of the rim. The brake with a drum device has many advantages: a large friction clutch contact surface, water protection, reliability and durability. Among the shortcomings can be noted the use of massive wheels, the complexity of service maintenance, and the need for periodic adjustment.

— Electric. Electric brakes are used by electric scooters. In this case, the deceleration and stop are made by the electric motor itself, by reducing the speed. Usually, the electric brake provides a soft and smooth stop. Usually, the electric brake acts as an auxiliary brake system. Also, advanced scooters often use a regenerative electric brake. In this case, when decelerating, energy is recovered, which allows you to recharge the battery pack.

— No brake. The front wheel is not equipped with a brake system. The brake can only be provided at the rear. But there are also such scooters that have no brakes either in front or in the back. The complete absence of a traditional brake is typical for the simplest scooters. Slowing down and stopping occur due to the actions of the rider himself. In this case, the user brakes with a foot extended to the ground or due to the natural deceleration of the roll. Usually, scooters without a brake are not physically capable of reaching dangerously high speeds.

- Foldable. The ability to fold the scooter — usually by "laying" the handlebar in a horizontal position, on the deck; in some models, the grips of the handlebar are also foldable. This feature greatly simplifies storage and transportation outside business hours. True, folding models are somewhat more expensive and slightly less reliable than clumsy ones, but in many cases, these moments are not critical.

- Handlebar height adjustment. The ability to change the height of the handlebar, adjusting it to the height of the user. This feature will be especially useful if the scooter is bought for a child for several years: children grow quickly, and every season a higher handlebar height is required. See "Maximum height" for details on height adjustment.

- Suspension. The scooter has a suspension system — most often on the front wheel. However, there are models with full suspension. In any case, such a system makes the ride more comfortable and smoothes out vibrations, but reduces rolling and control accuracy. Therefore, for example, sports scooters and snow scooters (see "Type") do not have this feature, and it is extremely rare in kickboards.

- Stand. A device that allows you to put the scooter in a vertical position on any suitable surface without using additional supports — such as walls, benches, fences, et...c. It is usually carried out in the form of a folding plate or a curly frame under the deck: in the folded state it is raised and does not interfere with movement, and if it is lowered, the scooter acquires an additional point of support.

- Seat. Own seat, allowing you to ride a scooter while sitting. Most often, this function is found in kickboards (see "Type") for the smallest children who are still unable to confidently keep their balance — the seat in such models also serves as fall protection. In addition, by definition, drift models are equipped with a seat.

— Basket on the handlebar. The basket mounted on the handlebars acts as a luggage compartment and can be used to carry various items, such as your favourite toys or a change of clothes. The capacity of the baskets is usually small, but they can provide some convenience. This function occurs mainly in models of the younger age group.

- Bottle holder. A device that provides for the installation of exclusively drinking bottles. This is facilitated by a cylindrical shape, in which such a container will ideally fit, while it will not fall out during the ride. This decision is applicable not so much to children's scooters as to adults, when the scooter is used not for entertainment, but for movement and thirst can overtake at any moment.

- Glowing wheels/deck. The scooter has wheel and/or deck illumination. Glowing wheels are usually made of a transparent polymer with LEDs embedded in them; the deck can be illuminated both on the sides and below. In any case, this function not only provides an original appearance but also makes the scooter more visible, which has a positive effect on safety — especially at dusk and in the dark. The backlight can be powered both by batteries and by a built-in generator that generates energy when the wheels rotate.

- Flashlight / headlight. The presence of a flashlight or headlight in the scooter. This function will be useful, especially in twilight and darkness: it provides illumination of the road and also makes the scooter more visible to other road users.

— Signal/bell. The presence of a bell or other sound signal (for example, a horn) in the kit. Such a device is useful for warning others about the movement of the scooter, it allows you to avoid unpleasant incidents.

- Pegs. Devices on the wheels of sports scooters that allow you to perform various trick exercises, namely, to slide along curbs, railings, etc. It is an additional stop that is installed in the wheel axle of the scooter and can be used not only as a fulcrum for the foot but also as a support when driving over various obstacles (railings, ramps, etc.). As a rule, scooters for stunt/sports riding are equipped with pegs. At the same time, they can be equipped with both the front and rear wheels and in some cases, the peg is installed on both the right and left sides of the wheel.

- Parent handle. A long handle is mounted on some kickboards so that an adult can comfortably hold on to it while standing next to it. Thus, the parent can, to a certain extent, control the movement of the child, stop him at the right time or vice versa, push, or even carry the baby, like in a stroller. Such a solution is relevant for models with a seat and for children who are not yet capable of independent movement on a scooter.

The maximum height to which the height-adjustable handlebar can be set (or just the height of the handlebar in the working position, if height adjustment is not provided).

The height of the handlebars should be such that the rider can stand on the deck straight, without bending his back, and hold on to the handles with slightly bent arms. At the same time, there is no unambiguous relationship between this parameter and the height of the rider. So the perfect option to determine the optimal height is to try it yourself, and then choose a scooter based on the result.