United Kingdom
Catalog   /   Sports & Outdoor   /   Cycling & Accessories   /   Bikes

Comparison Ardis Galaxy 4.0 BMX vs Comanche Kuuna

Add to comparison
Ardis Galaxy 4.0 BMX
Comanche Kuuna
Ardis Galaxy 4.0 BMXComanche Kuuna
from $246.48 up to $285.08
Outdated Product
from $274.00
Outdated Product
TOP sellers
Type
BMX
BMX
Frame and suspension
Frame size9.5"
Frame materialchromoly steelsteel
Suspensionno suspension (rigid)no suspension (rigid)
Wheels and brakes
Wheel size20 "20 "
Tyre
Innova /2.0"/
Rim materialaluminium
aluminium /X Rims/
Front brakerim mechanical (V-brake)
Rear brakerim mechanical (V-brake)rim mechanical (V-brake)
Front hub modelJoy Tech
Rear hub modelJoy Tech
Handlebar and transmission
Speeds11
Chainrings
/crankset: Samox 39T/
1
Freewheel cogs11
Chain modelКМС Z510KMC Z 410
Handlebar typecurvedcurved
General
Equipment
 
pegs
chain guard
pegs
Saddle modelVelo
Pedal modelVP 565
Weight12.4 kg
Color
Added to E-Catalogmarch 2014april 2013

Frame size

Frame size refers to the distance from the saddle attachment point to the bottom bracket attachment point (axles with gears and pedals). The main parameters that determine the choice of a bike for frame size are the height of the user, the purpose of the bike and the intended riding style.It is also worth considering the female frame, which is lowered, which allows you to ride comfortably even in a skirt or dress.

User height is the most significant factor. In general, the taller the user, the larger the frame should be. The universal formula that allows you to calculate a specific size is as follows: the length of the leg from the groin to the heel in centimeters must be multiplied by 0.6, and then divided by 2.5 — you get the approximate size of the frame in inches. But in the characteristics of brands, the frame can also be indicated in the usual form for measuring size XXS, XS, S, M, L, XL and XXL.

However, note that this value is very arbitrary and approximate, it can only be used for simple bicycles not intended for extreme driving (for example, city bikes, see "Destination"). If you choose a more specialized model (mountain, road, BMX) — it is better to refer to the tables for th...e appropriate type, because. sizes for one height can vary significantly depending on the destination. In addition, different manufacturers have different frame geometry and measurement methods, and therefore, for the most accurate selection, it is recommended to use the manufacturers' own tables.

Note that the optimal frame size is not absolute — in most cases, for the same height, “neighboring” sizes are quite suitable. And here it is worth paying attention to the intended driving style. It is believed that small, well-controlled frames are better suited for extreme variant, and larger and more stable ones are better suited for long-term calm movement.

Frame material

Steel. Steel is distinguished by high strength and rigidity, in terms of resistance to deformation, it noticeably surpasses other alloys and is inferior only to carbon fiber. At the same time, such frames dampen vibrations well, are inexpensive, and in the event of a breakdown, they are easily repaired. On the other hand, steel is heavy, three times heavier than aluminium and twice as heavy as titanium; therefore, such frames are found mainly among inexpensive mountain and city bikes, for which a lot of weight is not critical. It is also worth considering that this material is susceptible to corrosion if the protective coating is damaged.

Chromium molybdenum steel(Cro-Mo). An advanced variation of the steel described above. By themselves, chromium-molybdenum alloys have high strength and reliability, and frames made from them can have different wall thicknesses (depending on the load that a particular section is subjected to) — this allows you to slightly reduce weight. Thanks to this, Cro-Mo alloys are found even among fairly advanced road bikes, and they are also popular in touring models. At the same time, such frames cost much more than “ordinary” steel ones.

Aluminium. Actually, bicycles do not use pure aluminium, but various alloys based on it. They differ somewhat in characteristics, but they have a number of common features, the main of whi...ch is low weight combined with good strength characteristics. Due to this, aluminium alloys are widely used in road bikes, as well as in touring mountain bikes (see “Intended Use”). The main disadvantage of these materials is rigidity: they absorb vibrations worse than steel, which is why they are poorly suited for models without shock absorption (see below), and with a strong impact, such a frame will break rather than bend.

Carbon. Resin-bonded carbon fiber composite. It is used in high-end bicycles, as it is very expensive, but it is characterized by very high strength combined with low weight. Moreover, the properties of carbon fiber make it possible to increase strength not just in certain areas, but in certain directions, which contributes to even greater reliability. Note that carbon frames can be either solid (monolithic) or composite — in the latter case, individual elements are connected by metal parts, which reduces the cost, but makes the structure susceptible to corrosion. It is also worth considering that the quality of carbon in general depends on the price category of the bike, and relatively inexpensive frames can be sensitive to strong point impacts. This material is almost impossible to repair.

— Titan. A fairly advanced material that combines high strength, elasticity (which provides soft vibration damping), corrosion resistance and very low weight. However, the cost of such frames is quite high, and therefore they are used mainly in premium mountain and road bikes.

— Magnesium alloy. This material is notable primarily for its very low weight (many times lighter than aluminium), while it has good stiffness and elasticity characteristics, dampens vibrations well, and its price is relatively low. At the same time, magnesium alloys have a number of significant drawbacks. In particular, they do not tolerate impacts, especially point impacts, and are also extremely sensitive to corrosion even with minor damage to the protective coating, which is why such frames are very demanding for care and storage.

Tyre

Tyre model supplied with the bike as standard. Different tyres have different purposes and characteristics; knowing the tyre model, you can clarify these points and check how they correspond to your wishes. This is especially important when choosing a machine for serious cycling.

Front brake

The type of brake fitted to the front wheel of a bicycle. The first word in the name of the brake indicates the place of application of the braking force, the second — the design feature of the entire braking system.

Rim (V-brake). Rim brakes are called brakes that work by pressing the brake pads against the wheel rim. They transfer the braking force from the handle to the pads by means of a cable pull. The common advantages of all rim brakes are the simplicity of design, light weight, low cost, good interchangeability of parts, as well as the minimum load on the hub and spokes. On the other hand, such brakes wear out the pads and rim, require periodic adjustment, and lose effectiveness when the rim is dirty, iced or warped.

Structurally, the differences between the subtypes of rim brakes lie in the way they are attached to the bicycle frame. In addition, each variety has found its own scope. So, V‒brake is common in teenage, touring and budget mountain bikes, the clamp subtype has found its way into road and city bikes, and the U-brake is practiced in BMX bikes.

— Disk mechanical. In disc systems, braking is carried out by pressing the pads not to the wheel rim, but to a special brake disc rigidly fixed on its axis. The braking force, as in mechanical rims (see above), is transmitted to the pads through a special cable. The main advantages of disc systems are significantly more power than rim systems, as we...ll as better modulation (for modulation, see "Rim hydraulic" above). In addition, they are less sensitive to weather conditions (because the disc is quite high and clogs less than the rim), they easily carry the “eights” on the rims, and the elements of the system wear out more slowly and are not so demanding to adjust. Among the disadvantages are greater weight, high cost, a tendency to overheat, an increase in the load on the spokes and wheel hub, as well as difficulty in repair — the last point is aggravated by the fact that different models of even one manufacturer are often not compatible in terms of spare parts. However, despite all this, disc brakes are quite widely used in extreme riding bikes, especially mid-range and high-end models.

— Disc hydraulic. A variant of disc brakes (see above), in which not a cable is used to transfer force from the handle to the pads, but a hydraulic system — a sealed structure filled with liquid and including a piston system. One of the main advantages of hydraulics is excellent modulation, it allows you to very accurately control the braking force. On the other hand, such a drive is more complicated and more expensive than a mechanical one, and if the circuit is damaged and the hydraulic fluid leaks, the brakes become useless. Therefore, hydraulic systems are used relatively rarely, mainly in professional bicycles.

— Drum. Brakes using a special drum, inside which brake pads are installed; in bicycles, the role of the drum can be played directly by the wheel hub or a special part of the hub. Anyway, the pads are pressed against the drum from the inside, and the entire brake structure is closed. This is one of the main advantages of this option: the mechanism is protected from pollution, external factors such as dirt or snow practically do not affect the effectiveness of the brakes. In addition, the advantages of drum mechanisms include the fact that they practically do not require maintenance, do not wear out the rim and do not lose efficiency when it is bent. On the other hand, such brakes turn out to be quite bulky, and in terms of efficiency they are inferior to rim and even more so disc counterparts. Therefore, this option is found mainly in urban bikes.

— Roller. A variety of drum brakes (see above), in which the pressing of the brake pads to the drum is ensured by a special mechanism — roller. In this case, the brake drum is often performed separately from the bushing. Such solutions were developed as an attempt to combine the advantages of disc and drum brakes in one mechanism, and partly succeeded: roller systems are noticeably more powerful than classic drum brakes, they are well protected from dust and dirt, require virtually no maintenance and work effectively even with a curved rim. On the other hand, the weight, dimensions and price of such brakes turned out to be very significant, they worsen the roll and get quite hot with constant use; and protection against pollution is not as high quality as in drum systems.

Front hub model

The model of the hub used in the front wheel of a bicycle.

The hub is the central part in the wheel through which the axis of rotation passes. Features of the behavior of a bicycle depend on its characteristics, in particular, “rolling” (the ability to move by inertia, without pedaling). Knowing the model of the front hub, you can clarify its characteristics according to the manufacturer's documentation, find reviews from other users, etc., in order to determine how this model suits you.

Rear hub model

Model of the hub used in the rear wheel of a bicycle. See Front Hub Model for details.

Chain model

Model of the chain supplied as standard with the bike. For details on the value of the Model parameter for any part, see Cassette Model

Equipment

Additional equipment supplied with the bike.

Wings. Protective devices in the form of shields that are installed over the wheels and protect the cyclist and others from water and dirt flying from the wheels while riding. Usually, they are made removable — in case you need to minimize the weight of the car.

Saddle with springs. A saddle equipped with springs that make it softer and provide cushioning. Note that soft spring-loaded saddles are designed mainly for a calm, leisurely ride — for high-speed bikes (including advanced road bikers), narrow hard saddles are considered more suitable.

Shield on the chain. Protective shield covering the bicycle chain. Note that the dimensions and design of such a shield can be different: in some models it covers the entire upper section of the chain from the front to the rear sprocket, in others it protects only the front sprocket itself from the outside. Anyway, the main task of such a device is to protect the chain from foreign objects, primarily the edges of the cyclist's clothing. The shield can be made removable — in case you need to reduce weight.

Footboard. A device in the form of a small folding pin that provides additional support. With a footrest, the bike does not need to be leaned on a pole, wall, fence, etc. — it can be placed vertically on an...y relatively flat surface. Note that many bikes without a kickstand allow you to buy and install it separately.

Peggy. Special devices installed on the axles of "stunt" bikes — BMX or mountain bikes of the corresponding specialization (see "Application"). Pegs look like extensions of axes pointing in both directions. The standard size of one such "continuation" is 11 cm in length and 4 cm in diameter. They are used for a variety of acrobatic routines, ranging from riding on pegs to sliding on edges, railings, etc.

Boot. A classic bike rack is a platform for carrying various cargoes, mounted above the rear wheel. It is found mainly in city bikes (see "Application"), as well as some relatively simple mountain and road models. Separately, we note that it is at least highly discouraged to carry passengers on the boot, and in many countries it is expressly prohibited by traffic rules.

Front boot. Boot (see above), located above the front wheel. The advantage of this arrangement is that the transported luggage is constantly in front of the cyclist's eyes. On the other hand, the front rack is usually attached to the steering wheel and turns with it; thus, the additional load can significantly complicate management. Therefore, this feature is relatively rare, usually as an addition to the traditional (rear) boot; the exception is tourism models (see "Application").

Basket on the steering wheel. A basket for transporting various goods, installed in front of the steering wheel, above the front wheel; a kind of analogue of the front boot described above. At the same time, on the one hand, the basket is more massive, on the other hand, it is better suited for transporting large items or numerous small items. In addition, the cargo on the boot needs to be additionally secured, while this is not always required for the basket.

Signal / call. A bell or other sound signal — for example, a horn — usually mounted on the steering wheel, at the cyclist's hand. This equipment is very useful for warning other road users of an approaching bicycle. And in some countries, the presence of a sound signal is mandatory according to traffic rules.

Lighting equipment. In this case, the presence of a headlight, a taillight, and in some cases, both at once, may be implied; specific configuration should be specified separately. Anyway, such equipment is indispensable for riding at night: it makes the cyclist visible to other road users, and the headlight also illuminates the road. In many countries, traffic rules expressly prohibit driving at night without lights.

Bottle holder. Dedicated water bottle holder, usually mounted on the frame. It is more convenient to carry a supply of water with you on such a mount than to keep a bottle in a backpack, bag, on the boot, etc. Some bike models with this function are immediately equipped with a bottle, for others it needs to be purchased separately.

Pump. The presence of the pump in the delivery set eliminates the need to buy it separately; in addition, the “native” pump initially fits the existing mounts, while problems may arise with a third-party one. Note that most often the kit comes with relatively simple and compact hand pumps; they are not designed for large volumes of work, but they can quite cope with everyday tasks like pumping a flat tyre.

Saddle model

The model of the saddle supplied as standard with the bike. For more information on why you need to know the model of a particular bicycle component, see p. "Cassette Model".
Ardis Galaxy 4.0 BMX often compared
Comanche Kuuna often compared