Comparison Konica Minolta KIP 770 vs HP DesignJet T2300 (CN727A)

The type of plotter is indicated by the technology used for printing. Nowadays, laser and inkjet models are most widely used, but other, more specific varieties can be found — solvent, sublimation, ultraviolet, textile, latex and solid ink plotters. Here are the main features of each of these types:

— Inkjet. In inkjet plotters, the image is built from the smallest drops of ink, “spit out” by the print head onto the paper. Such devices are relatively inexpensive, while they provide good print quality and can work with plain paper, and the inkjet technology itself is suitable for full-colour images. One of its key cons can be called poor suitability for making numerous prints in a short time: printing is relatively slow, and prints are more expensive than, for example, laser ones. In addition, the ink used for classical inkjet printing is sensitive to humidity, temperature changes and, in most cases, ultraviolet light. Therefore, materials printed on such a plotter are only suitable for indoor use; for outdoor installations, either protective coatings or more sustainable technology such as UV or solvent (see below) should be used.

— Laser. Laser printing is carried out using powdered toner: the laser beam "marks" indivi...dual areas on a special light-sensitive drum, toner sticks to these areas, which is then transferred to paper. Such devices are very convenient for operating with numerous materials: printing is fast, and the cost of one print is low. On the other hand, the vast majority of such plotters are monochrome, for drawings and other similar materials. For colour printing, laser technology is poorly suited. Laser plotters are expensive. However, relatively recently, a specific variety has appeared — LED-plotters. They are similar in principle of operation, which is why they are also commonly referred to as laser ones; however, instead of a single emitter, such devices use a system of LEDs. This made it possible to simplify the design and reduce its cost.

— Solvent. This printing technology is generally similar to inkjet, but it uses a special ink based on solvent — a solvent obtained from petroleum products. The advantage of such inks over common inks is that the solvent "penetrates" deeply into the surface of the material. This ensures reliability, resistance to adverse conditions, as well as the ability to print on a wide variety of materials — banners, vinyl films, fabrics, etc. At the same time, unlike UV printing, the materials do not require special processing — it is enough to wait for the solvent to dry. Thanks to all this, as well as the ability to create a colorful image, solvent plotters are very popular, in particular, in the production of outdoor advertising. However, this technology has its cons — foremost, a pungent smell, which makes it difficult to print materials for internal use.

— Sublimation. Plotters, which action is based on the phenomenon of sublimation — the evaporation of a solid dye and the settling of its particles on the media (often under the surface of the media). There are two types of sublimation printing: direct, when the image is applied directly to the final media, and transfer, when the image is printed on a transitional carrier and transferred from it to the media surface using a heat press. In modern plotters, the second option is most often found — it allows you to print on a wide variety of materials, including voluminous objects that simply would not fit in a plotter. This way of plotter operating that are meant in this case by the term “sublimation”, and devices with the possibility of direct printing are highlighted in a separate category — textile; see below for more details. Anyway, sublimation technology provides a higher quality image than inkjet (and its analogues), however, the ink is sensitive to ultraviolet light, which may require the use of protective coatings.

— Ultraviolet. A variation of inkjet printing (see above), using the so-called UV-ink – an ink that solidify when exposed to UV light. Such ink forms a film on the surface of the printed media that protects the applied image from adverse influences (dust, humidity); At the same time, due to the good adhesive properties of the ink, a wide variety of materials can be used for printing, which makes this technology well suited for outdoor advertising. Compared to another similar technology — solvent — UV inks are more expensive, but for a number of reasons, prints are somewhat cheaper. Other pros include instant solidification and less expressed odour, making UV printing suitable for indoor materials as well.

— Textile. Plotters with the ability to print on fabrics. Usually, they are a kind of sublimation models (see above), which support the possibility of direct printing. Note that a durable and stable image with such printing can only be obtained on synthetics — the ink is gradually washed off from cotton and other natural fabrics during washing. In addition, this method is not suitable for materials sensitive to heat.

— Solid ink. As the name suggests, this type of plotter uses solid state dyes to print. When printing, the required portions of ink are melted and applied to the drum, which prints them onto the media. Solid ink devices are compatible with a wide variety of materials (paper, film, cardboard), they provide bright, rich colour images with excellent resolution, provide good speed, and the cost of prints over long periods of use is very low. Among the cons of this technology, is the necessary to constantly keep the plotter turned on — otherwise, each time it is turned on, part of the ink will be dumped into the waste container.

— Latex. Plotters using water-based ink with the addition of synthetic latex. During operation, individual dots are applied similarly to inkjet printing (see above), after which they are heated with an oven to evaporate water and holding the latex. One of the key advantages of this type of plotters is environmental friendliness: they are safe and can be installed in any room. In addition, latex plotters are compatible with a wide range of materials (including even textiles), provide good brightness and colour reproduction, and prints are odorless and resistant to moisture.

The paper size the plotter is designed to operate with. Most models use ISO 216 formats, identified by the letter A followed by a digit. These formats include the popular A4, but plotters usually work with larger paper:

• A0+. This marking means that the plotter is able to work with sheets larger than A0 (see below). The A0+ format itself provides a sheet width of 914 mm, however, in this case, support for wider media is usually provided — about 1100 mm (1050 – 1150 mm) in the most modest models of this format ( A0+ 44 ") and 1500 mm or more in the largest ( A0+ ≥ 60")
• A0. Paper of this format has a size of 1189x841 mm.
• A1. Paper size 841x594 mm — in other words, half of the A0 format.
• A2. A sheet of this format is approximately the size of a newspaper spread — 420x594 mm, half the size of A1. Considered relatively small by plotter standards.
• A3. The smallest format found in modern plotters: 297x420 mm, that is, only twice the standard A4 (in other words, with a magazine spread). Used in few desktop models (see Installation) — particularly, textile devices (see Product Type) for printing on T-shirts and other similarly sized clothes.

It is also worth noting that many models are able to work with other sizes. Moreover, we are talking not only about reduced, but also about la...rger options: the maximum media width (see below) often exceeds the standard paper size.

Colour plotter — the range of colours reproduced by the unit when printing.

— Coloured. Devices that use the entire colour gamut. Such printing is more expensive than black and white, but it allows you to get bright and most reliable images; of course, if necessary, a monochrome image can also be reproduced on such a plotter. So, this option is most popular nowadays. Technically, almost any printing technology can be used in colour devices (see "Product Type") — except that laser colour printing is too complicated and expensive, and therefore usually does not occur in plotters.

— Monochrome. The common name for such devices is “black and white,” since monochrome plotters print exactly in black (to be precise, in different shades of grey). Obviously, the possibilities of such printing are very limited compared to colour. However, it also has a number of advantages — in particular, it allows the use of laser technology, thus providing a very low cost per print and high speed. In addition, for some tasks — for example, printing drawings — colour is not initially required. Actually, plotters from this category are used mainly for operating with large-format drawings.

The highest image resolution the plotter is capable of printing on paper. It is indicated by the number of dots per inch horizontally and vertically — for example, 1440x720.

The higher the resolution, the smoother the printed image will be as a result, the less noticeable individual dots will be on it (to the point that they cannot be seen at all with the naked eye). On the other hand, the ability to print in such resolutions affects the price of the plotter accordingly. In addition, do not forget that high-quality printing requires appropriate source materials — the quality of the print cannot be higher than the quality of the original image.

Note that in this case we are talking about the maximum resolution; usually in the settings it is possible to set more modest parameters.

The print speed provided by the plotter.

Such devices are intended for large-format material, so this parameter is usually indicated as m² per hour. Keep in mind that the spec usually give the maximum print speed, which is achieved at a reduced resolution and overall quality; in standard mode, the plotter may work noticeably slower. So when choosing for this parameter, it is worth taking a certain margin. On the other hand, according to the values indicated in the specs, it is quite possible to evaluate different models and compare them with each other: the difference in the claimed performance, usually, will proportionally correspond to the difference in the actual speed of work.

As for specific values, speed up to 20 m²/h for modern plotters is considered low, 21 – 50 m²/h — medium, and in the most powerful and performant equipment this value can exceed 50 m²/h.

Approximate time taken by the plotter to print one sheet.

This indicates for the paper size that the machine was originally designed for (see "Paper Size"). And it is approximate because it is usually given for optimal or almost optimal printing conditions: low quality and resolution, relatively simple images, etc. So the actual print time of the sheet may differ from the claimed one in one direction or another, depending on the operating parameters — starting from the mentioned quality and resolution to the type of media. However, according to the figures indicated in the specs, it is quite possible to evaluate different models and compare them with each other: the difference in the claimed time, usually, will proportionally correspond to the difference in the actual printing speed.

It is also worth noting that this time is usually indicated by the duration of the printing process itself — from the capture of the sheet by the feeder to the output of the completed print from the device. Interruptions inevitably occur between printing individual sheets, so that the total printing time is longer than the printing time of a sheet multiplied by the number of sheets. For example, a device with a time consumption of 36 sec per sheet theoretically should print about 100 sheets per hour (1 h = 3600 s, 3600/36 = 100), but in fact such a plotter usually produces about 70 – 75 sheets in this time.

The smallest drop volume of ink that can be produced by the printhead of an inkjet or similar plotter (see "Product Type").

This parameter is directly related to the print resolution (see “Maximum resolution”): the more dots per inch, the smaller the separate dots and, accordingly, the drops should be. At the same time, models with the same dpi number may differ slightly in this parameter. In such cases, it should be assumed that a smaller droplet volume potentially provides better print quality, with more accurate reproduction of fine lines and borders between individual areas of the image, however, such features accordingly affect the price of the device.

The largest width of paper or other media that the plotter can handle. The larger this parameter, the larger the materials that can be printed on the device; however, the dimensions, weight and cost of the plotter also increase markedly due to this.

The lowest grammage of paper that the plotter can print normally on. Grammage is expressed in grams per square metre; accordingly, the more dense the paper, the thicker it is, and the greater the difference between the minimum and maximum paper grammage, the greater the range of materials the plotter can operate with.

The use of materials that are too thin can lead to a number of troubles: multi-sheet picking, creasing, jamming, etc. Therefore, if you plan to use low-grammage paper, you should pay special attention to this characteristic.