United Kingdom
Catalog   /   Tools & Gardening   /   Power Tools   /   Grinders & Polishers

Comparison Makita 9565CVR vs Makita GA5040C

Add to comparison
Makita 9565CVR
Makita GA5040C
Makita 9565CVRMakita GA5040C
Compare prices 3Compare prices 4
TOP sellers
Typeangle grinderangle grinder
Specs
Power consumption1400 W1400 W
Rotation speed2800 – 12000 rpm2800 – 11000 rpm
Max. disc diameter125 mm125 mm
More features
soft start
speed controller
speed control
safety lock-off
safety clutch
soft start
speed controller
speed control
safety lock-off
safety clutch
In box
additional handle
additional handle
General
Power sourcemains (230 V)mains (230 V)
Noise level93 dB97 dB
Power cord length2.5 m2.5 m
Dimensions303x140x116 mm
Weight2.2 kg2.5 kg
Added to E-Catalogjuly 2015december 2014

Rotation speed

The speed of rotation of the working attachment, which is capable of providing a grinder of the appropriate design (for example, angle — see "Type"). If the device has speed control, this paragraph shows the range of such adjustment, from minimum to maximum.

It makes sense to compare by this parameter units belonging to the same type and having the same maximum diameter of the disk (or other working nozzle). The latter is due to the fact that the larger the disk, the faster its edge moves (at the same speed); i.e. a larger diameter requires less RPM for the same performance/efficiency. In general, when comparing different models, the following should be taken into account. The higher rotation speed is well suited for large volumes of work (because it improves productivity) as well as for fine polishing with “delicate” nozzles. A lower setting, in turn, improves accuracy (reduces the chance of removing excess material), as well as provides more torque and allows you to more effectively deal with hard, stubborn materials. More detailed recommendations for different types of work and different nozzle diameters can be found in special sources; here we note that an increase in the rotation speed, usually, affects the cost of the machine compared to analogues (since this requires a more powerful engine). In addition, discs and other attachments may have maximum RPM limits.

Noise level

Approximate noise level generated by the grinder during operation. Note that this indicator is quite approximate, because. actual "loudness" can vary markedly depending on the type and shape of the material being processed, the surface it is placed on, and other circumstances. In addition, different manufacturers may use different measurement methods. Nevertheless, this indicator makes it possible to assess how comfortable this or that model is in operation and whether special hearing protection is required.

The most “quiet” modern grinders give out about 65 dB — this is comparable to loud speech at a distance of 1 m; in the loudest, the noise level reaches 107 dB — this is the volume of an industrial workshop.

Weight

The total weight of the grinder; for battery models (see "Power Source"), usually, it is indicated without taking into account the battery.

This indicator has two meanings. On the one hand, light weight has a positive effect on manoeuvrability and reduces fatigue during work — especially when processing vertical surfaces and ceilings, as well as in other situations where the tool has to be held on weight. On the other hand, for grinders with a vibrational principle of operation (see "Type"), used for processing horizontal surfaces, a significant weight is considered optimal: it allows the tool to fit closer to the material being processed, and also contributes to stability and retention. So when choosing such a model by weight, it is worth considering the features of its intended application.
Makita 9565CVR often compared