Comparison Gazer F730 vs Gazer F725

Glass mount provided in the model with the corresponding type of installation (see above).

Note that in many models, not the recorder itself is attached to the glass, but the bracket, on which, in turn, the device is installed. To learn how to fix the recorder on the bracket, see "Mounting the recorder". And the options for attaching to glass can be as follows:

— Sucker. The traditional suction cup, which works due to the reduced pressure between the mount and the glass — as a result, the force of the pressure of the outside air and holds the structure in place. One of the main advantages of this option is “reusability”: the suction cup can be repeatedly stuck and detached at the request of the user, and after removal it leaves practically no traces. However this type of fastening is considered somewhat less reliable than stickers; however, the suction cups used in video recorders are usually of a special design that provides sufficient reliability for practical use. Therefore, this type of mount is extremely popular in modern registrars.

— Sticker. A plate with a layer of special glue, due to which the entire structure is held on the glass. Such mounts are considered more reliable than suction cups, they are less prone to wear and do not lose effectiveness even with minor damage such as cracks and chips. On the other hand, the sticker is usually installed "once and for all..." and does not provide the ability to quickly remove the bracket. And although dismantling by itself is possible, however, it will not work to reuse the sticker, and the glass will most likely have to be cleaned from traces of glue. So installing a recorder with such a mount requires special care and attention.

Note that some models of DVRs are supplied immediately with both types of mounts described above in the kit. This allows the user to choose the option of their choice — including changing the suction cup to a sticker, if the need arises.

The sensor is a key element of any digital camera; it is from it and from signal processing technologies that the quality of the resulting image primarily depends. In this case, the type refers rather to the brand or brand of the matrix; it is usually indicated if the recorder is equipped with a high-quality sensor that is noticeably superior to most solutions on the market.

One of the most popular such options is Sony. The specific characteristics of the matrices ( IMX179, IMX222, IMX291, IMX307, IMX317, IMX322, IMX323, IMX326, IMX335, IMX415) may vary, but anyway, such a sensor is a sign of a high-end DVR.

In addition, there are models equipped with matrices from other manufacturers — Aptina, OmniVision, Samsung(GalaxyCore), Sandvik. Such solutions are generally considered to be simpler and more democratic than Sony — both in terms of price and functionality. Nevertheless, Samsung has a lot of developments in the field of electronics, and even such r...elatively “simple” sensors are usually more advanced and of higher quality than “know-names”.

Another manufacturer that produces fairly high-quality matrices is Panasonic. Such sensors are not as widespread as those described above, but they are still found in video recorders, including pretty advanced.

The aperture ratio of the lens installed in the video recorder.

This parameter determines how much the optics weaken the transmitted light flux. The aperture ratio is indicated by a fraction - for example, f/1.8. The smaller the number in the denominator, the more light the lens can transmit. A conventional model with an f/2.2 lens will theoretically produce a darker image than a recorder with a high-aperture optics of f/1.5.

High aperture ratio is important, first of all, when shooting in low ambient light conditions: it allows you to capture images in the twilight and dark hours of the day without creating additional artifacts in the form of noise. At the same time, when shooting with high-aperture optics, the blurring effect of moving objects in the frame is reduced. On the other hand, the actual quality of the recorder camera depends on many other factors - in particular, the type of matrix, the image processor used, etc. Therefore, the aperture ratio specified in the characteristics is not the ultimate truth - it is rather for reference.

The viewing angle provided by the main camera of the dashcam. It is usually indicated along the diagonal of the frame, less frequently along the horizontal, which is why models with the same numbers in the specifications may differ somewhat in actual field of view. So, if you have any doubts about this, it wouldn't hurt to find and watch video samples from different models when selecting one.

All else being equal, a wider viewing angle allows you to cover more area, but individual details in the frame appear smaller. Furthermore, wide-angle lenses cause geometric distortions in the image (however, a DEWARP function may be provided to correct this, see "Features"). As for specific numbers, viewing angles up to 120° inclusive are considered relatively small for modern recorders, values of 121 – 140° can be called medium, 141 – 160° are above average, and the most wide-angle models are capable of covering an area of more than 160°.

The largest size of the memory card allowed for the device. This limitation is primarily due to the fact that more powerful hardware is required to work with larger volumes. In addition, there are nuances associated with individual subspecies of cards. Anyway, this value cannot be exceeded: with a high probability, the registrar will either work incorrectly, or will not be able to work at all, or even completely fail.

Most modern registrars support cards up to 32 GB or 64 GB, but there are models that are compatible with more capacious cards — 128 GB or even 256 GB.