Comparison HOBOT 368 vs HOBOT 198

The nominal processing time for 1 m² of glass helps assess the operating speed of a window-cleaning robot: the lower the value in min/m², the faster the pass. For example, at 2.5 min/m², a surface measuring 4 m² will require about 10 minutes, excluding a repeat cycle, repositioning the device, and preparing the cleaning cloths. Models are best compared in identical modes, since the result is affected by the route, degree of contamination, and number of passes.

Power consumption characterizes the load on the motor, suction fan, drives, and electronics, but it does not directly measure cleaning quality. It is more appropriate to compare this value within the same type of equipment: a more powerful device may provide greater operating headroom, but streaks and residual water are influenced more by the nozzle design, the condition of the cloths, and the movement algorithm. For corded models, this value also helps assess the requirements for the adapter or external power source.

Suction power determines how securely the window-cleaning robot adheres to the glass. A higher value helps maintain adhesion when moving over joints, minor unevenness, or areas where the cleaning pad does not fit tightly. However, stronger suction does not guarantee better removal of stains and streaks—the result also depends on the cleaning pads, liquid dispensing, and route. Regardless of the specified pressure, the robot should be secured with a safety cable.

Smartphone control allows you to control the window-cleaning robot through the dedicated mobile app. From your phone, you can start and stop cleaning, select a mode, change the direction of movement, and monitor the device status—the exact set of commands depends on the model. The smartphone connection can be established via Bluetooth—for direct control nearby without a router—or via Wi‑Fi, which provides a greater connection range and may support remote access over the internet.

The cable length determines whether the corded window-cleaning robot can reach the farthest part of the glass without straining the wire. When calculating, account for the route from the outlet and adapter to the window, and arrange any excess cable so that it does not interfere with movement or the safety rope.