United Kingdom
Catalog   /   Tools & Gardening   /   Construction Power Tools   /   Paint Sprayers

Comparison Dnipro-M SH-65 vs Wagner W 100

Add to comparison
Dnipro-M SH-65
Wagner W 100
Dnipro-M SH-65Wagner W 100
Outdated ProductCompare prices 6
TOP sellers
Main
For easy cleaning of the tool, the QUICK DISASSEMBLE system is provided, which allows you to quickly disassemble and assemble the spray gun.
Precise spray. Perfect for delicate painting of small details.
Devicepaint sprayerpaint sprayer
Typecordedcorded
Specs
Power consumption650 W280 W
Paint consumption0.9 L/min0.11 L/min
Maximum viscosity100 DIN90 DIN
Nozzle size1.8, 2.6 mm2.5 mm
Sprayingpneumaticpneumatic
Containerbottombottom
Container volume800 mL800 mL
Tank materialplasticplastic
General
Weight1.4 kg1.3 kg
Added to E-Catalogmarch 2019february 2018

Power consumption

The power consumed by the operation of an electric tool (see "Type").

Most modern spray guns, even performant ones, have a rather low power: for example, models with more than 1 kW are extremely rare, and in most cases, power consumption does not exceed 500 W at all. So when connecting such equipment to sockets, there are usually no problems; only single units of high performance, requiring 3.5 kW or more, have to be connected according to special rules (directly to the shield). In other cases, data on power consumption is most often not needed for normal use and may be required only for specific tasks — for example, to calculate the load on an autonomous generator.

Paint consumption

Consumption of paint or other material (for example, mortar for plaster) when the spray gun is operating in normal mode.

The higher the flow rate, the more material the tool can apply per unit of time, the better it is suitable for processing large areas and for applying thick coatings. On the other hand, not all types of work require high productivity, and sometimes relatively low consumption is optimal. Detailed recommendations on this subject for different situations can be found in special sources.

Maximum viscosity

The maximum viscosity of the paint or other working material at which the spray gun is able to work normally. Specified in DIN units; a certain DIN in this case is the number of seconds it takes for a standard volume of paint (usually 100 mL) to pour out of a funnel with a strictly defined pour hole diameter (usually about 4 mm). Such a funnel (viscometer) can be supplied with the spray gun, but if necessary, it can be purchased separately.

Thus, the larger the DIN, the more viscous the composition is. And the larger the number indicated in the characteristics of the spray gun, the wider its capabilities, the thicker liquids can be poured into it without fear of clogging and breakage. At the same time, it should be taken into account that in fact it is not so often necessary to work with thick liquids — on the contrary, excessive viscosity worsens the quality of the coating, leads to streaks and increases the drying time. For example, most enamels and oil paints are used at a viscosity of about 20 DIN, latex paints up to 45 DIN, etc. General recommendations on this matter can be found in special sources, and specific ones can be found on the packaging of a particular brand of paint or other composition.

Nozzle size

The diameter of the nozzle at the outlet of the spray gun.

It is from this nozzle that paint or other working material comes out. And the productivity and spot size at the exit depend on the diameter. Accordingly, larger nozzles are better suited for processing large surfaces, while smaller nozzles provide greater precision and accuracy. Thus, this parameter is directly related to the type of device (see above). There are also spray guns with a replaceable nozzle, when more than one nozzle is provided in the kit, which expands the possibilities of using the device.
Dnipro-M SH-65 often compared
Wagner W 100 often compared