Comparison Yamaha YDP-S34 vs Yamaha CP-33

— Stationary. Stationary tools have their own stand and are designed to be installed directly on the floor. At the same time, in accordance with the name, such models are designed for constant stay in one place and are poorly suited for regular movements even within the same room, not to mention longer distances. However, this is not a disadvantage, but only a characteristic feature of such cases. But the unequivocal disadvantage of stationary tools can be called their rather high cost. On the other hand, such models are as similar as possible to real pianos in appearance, layout and equipment: the keyboard, usually, is located at a standard height, and pedals are installed in the lower part of the case (and there are usually as many as three of them, a complete set). And it is much easier to provide high-quality sound and an abundance of features in such an instrument than in a portable one — the manufacturer does not need to pay special attention to compactness and weight reduction.

— Portable. Portable are called digital pianos, made in the form of portable keyboards and devoid of stands; to play such a keyboard, you need to put it on a table or other support. Outwardly, such instruments are similar to synthesizers, and sometimes almost indistinguishable from them. At the same time, unlike synthesizers, portable digital pianos have mostly full-size keyboards with 88 keys, and displays are rarel...y equipped. And in terms of functionality, the differences are that digital pianos are more oriented towards traditional music: they can provide relatively few timbres, often do not support auto-accompaniment (see below), but provide a fairly high sound quality. If we compare portable models with stationary ones, then the key advantage of this option is obvious — the tool can be moved from place to place with relative ease and even carried with you, if you have the appropriate case. The disadvantage also naturally follows from the design — it will be extremely difficult to play such an instrument without additional support, and not every piece of furniture can play the role of such a support. So it is almost impossible for a portable digital piano to do without a stand (see "Packaging").

The presence of its own cover in the design of a digital piano.

Such a cover during off-hours closes the keyboard, and often also additional controls. This not only gives the instrument a neat appearance, but also protects the keys — primarily from dust (and dust can not only create discomfort during use, but also cause mechanical failures, accumulating under the keys).

Note that this function is typical for stationary tools (see "Body"). Portable models with lids would be too bulky and heavy, so it is suggested that they use cases or other similar devices.

The presence of built-in pedals in the design of a digital piano.

Pedals are an indispensable element of equipping a classical piano; accordingly, they are often provided in digital counterparts. Actually, this function is practically obligatory for models of a stationary layout (see "Hull"). But in portable ones, on the contrary, built-in pedals are not found — there is simply nowhere to install them, external plug-in pedals are available for such models (see below).

The traditional number of built-in pedals is three; there are practically no other options in a power tool. Note that in many models, the specific functions of the pedals can change depending on the set timbre, or even manually, at the request of the musician.

The number of voices supported by the digital piano — more precisely, the maximum number of voices that the instrument can play at the same time.

This parameter should not be confused with the number of notes that can be played simultaneously on the keyboard. The fact is that in many timbres, several voices (tone generators) are used for each note at once — this is the only way to achieve a more or less reliable sound. Thus, the required number of voices can be many times higher than the number of notes — for example, the simplest chord of 3 notes may require 9 or even 12 voices. In addition, tone generators are used to play auto accompaniment parts and built-in songs (see below), and here the number of voices can already be measured in tens.

In light of all this, polyphony of less than 90 voices is typical mainly for relatively simple and inexpensive instruments that are not designed for complex tasks. The smallest number found in modern digital pianos is 32 voices. It is desirable for a more or less solid instrument to have at least 96 voices, and in top models this figure can reach 256.

The number of built-in sounds provided by the Digital Piano.

Despite the name, digital pianos are extremely rarely designed to imitate the sound of only a piano — the electronic hardware allows them to provide other timbres of sound. In addition, even the piano has its own varieties — for example, among the grand pianos there are 6 main classes, from large concert to miniature. So the built-in sounds can cover different kinds of pianos, as well as other instruments and sound effects.

The abundance and variety of timbres in digital pianos as a whole is not as great as in synthesizers, however, in this category there are very “charged” models, with a hundred timbres or more (in the most multifunctional, this number can exceed 900). However, it is worth specifically looking for a “multi-instrumental” model if you do not intend to be limited to the sound of the piano and would like to have more freedom of choice. It is worth remembering that a specific set of timbres can be different.

If the instrument is bought exclusively as a piano, then here, on the contrary, it is worth paying attention primarily to solutions with a small number of timbres. Such models are not only cheaper than "universals" — they can also sound better (due to the fact that there are few timbres and the manufacturer can carefully approach the sound quality of each built-in "instrument").

The range over which the tempo of the sound played by the instrument can change. It can be either a built-in melody or a part recorded on a sequencer, or an auto accompaniment, a tutorial or a metronome. For more information on all of these features, see the corresponding glossary entries. Here we note that a change in tempo is often required in fact — for example, to speed up an initially "sluggish" accompaniment or slow down a training programme that is difficult to master at the original tempo.

Tempo is traditionally indicated in beats per minute. The classical, "academic" range covers options from 40 bpm ("grave", "very slow") to 208 bpm ("prestissimo", "very fast"), however, in modern digital pianos, the working range of tempos is often significantly wider.

The presence of a sequencer in the design of a digital piano.

This function allows you not only to play music on the instrument, but also to record it with the possibility of later playback. However, this is at least; in addition to recording the parts of the instrument itself, the sequencer can provide recording an audio or MIDI signal from the corresponding input, mixing several parts (including recording the music being played over the music being played “on the go”), working with the parameters of individual tracks (volume, tone, timbre), as well as specific functions such as quantization (smoothing uneven tempo). The specific functionality of the sequencer may be different, it's ok to check it before buying. However, anyway, this function can be a good help for the musician; it is especially useful for those who are not limited to the performance of ready-made music and want to compose their own compositions.

The presence of built-in songs in the design of a digital piano.

Unlike auto accompaniment (see above), built-in songs are ready-made tunes that are played exactly according to the notes; the musician can change their tempo and key (if the instrument has the appropriate functions), but cannot control the melody during playback.

You can use built-in songs in different ways. So, when learning, they can play the role of a model that the musician is trying to repeat. You can include such a melody for accompaniment, or even use the synthesizer as a player (for example, to fill technical breaks in a live performance). In addition, the built-in songs can be useful when choosing a specific digital piano model — these melodies are played back using the instrument itself, which allows you to evaluate its general capabilities and the sound characteristics of certain tones.

The presence of the chorus effect in the digital piano.

Initially, this effect was developed as an attempt to simulate the choral sound of several instruments of the same type. Even a perfect choir never plays 100% in sync, which is what the creators of the chorus tried to reproduce. This effect works as follows: several copies are taken from the main signal, which are played along with it — but not strictly simultaneously, but with a small (up to 30 ms) delay, selected randomly for each individual signal. This really allows to imitate the effect of polyphony to a certain extent, however, such sound is still far from a full-fledged choir. However, the chorus itself is quite interesting as an additional effect.