Comparison Clever Panda i5 vs Panda X900

A capacity of a tank for water or detergent a vacuum cleaner with a wet cleaning function is equipped with. (see "Cleaning type").

Large capacity allows you to work longer without refilling the tank. On the other hand, an increase in capacity has a corresponding effect on the size, weight and cost of the unit. Thus, manufacturers choose this parameter taking into account the general specialization and the “weight category” of a particular model. So, in robots (see "Type"), the volume of the water tank is, by definition, small. Even in the heaviest models, it does not exceed 650 mL. But other types of vacuum cleaners can differ markedly in this parameter.

In general, for non-robot units, a capacity of 1 liter or less is considered very limited, 1 – 2 liters is small, 2 – 3 liters is average, more than 3 liters is above average. However, it much depends on the type. For example, in conventional vacuum cleaners, the capacity does not exceed 2.5 liters, and "for workshop" models this is very little — in most cases, they have a tank capacity of 3 liters or more.

The ultraviolet lamp illuminating the space processed by the vacuum cleaner.

Such equipment is found mainly in two types of modern vacuum cleaners — in almost all handheld bed models (see "Product type"), as well as in some robots. In the first case, the lamp is usually built-in; in the second, it can be detachable. However, the function is the same: UV radiation quite effectively destroys harmful microorganisms, without releasing harmful substances and without harming people and pets. Of course, we are not talking about complete disinfection. Nevertheless, the use of a UV lamp anyway improves the quality of cleaning.

Separately, we emphasize that when using vacuum cleaners with such a lamp, one should take care to avoid getting ultraviolet light into the eyes. It is especially important to be careful when working with handheld models.

Additional modes of operation provided by the robot cleaner (see "Product type").

First of all, let us clarify that the standard modes, in this case, include two formats of cleaning at standard power — continuous, in which the vacuum cleaner carefully cleans the entire room (or its specified area), and chaotic, in which it moves randomly within the working area. Other ways of working are considered additional; their list is given in this paragraph. Among the most common additional modes are spot cleaning (Spot), perimeter cleaning (Edge), and turbo mode. In addition, a fairly popular function is the Zigzag. Here is a detailed description of the different options:

— Spot cleaning (Spot). A mode that allows you to use the vacuum cleaner for targeted cleaning of a relatively small area of the room — for example, when spilling a small amount of debris. Most often, this programme works as follows: the robot moves to the centre of a user-defined zone, and then starts moving from this point in an expanding spiral and stops at a given distance from the starting position.

— Perimeter cleaning (Edge). A mode that allows you to start the vacuum cleaner around the perimeter of a given zone. By the name, it is mainly used for cleaning along the walls of the room: a lot of dirt accumulates in these places, which are difficul...t to remove when using standard cleaning modes.

— Turbo mode. Power mode for more suction force. Usually, the movement of the vacuum cleaner, in this case, can be carried out according to any programme available in the settings — both standard (combing, random movement) and additional (Spot, Edge, Zigzag). Anyway, the turbo mode is useful primarily for cleaning carpets and other floor coverings with pile, for which the standard power of the vacuum cleaner is not enough. However, working at increased traction increases the load on the unit and increases its wear. Therefore, most models have restrictions on the maximum time of continuous operation in turbo mode and sometimes on the minimum duration of breaks between switching on this mode.

— Zigzag. Zigzag movement is a kind of transitional variant between the orderly combing of the room and the random choice of direction. Zigzag allows you to achieve greater efficiency than chaotic movements. In addition, with such a movement, it is easier to compensate for the presence of various obstacles and ensure thorough cleaning of the entire given area.

A method for limiting the processed space provided in a robot vacuum cleaner.

Another name for this feature is "virtual wall". Its general meaning is quite obvious: a “wall” (or several walls) allows you to limit the movement of the robot on the surface to be cleaned. It can be useful if cleaning needs to be done in a room without a door. Or if part of the floor is occupied by small items that do not need to be cleaned (for example, pieces of a puzzle being assembled). But the specific possibilities of such a restriction are directly related to how it is implemented. Note that the function is found mainly in middle-class robot vacuum cleaners and top models. Budget robotic "cleaners" often do not have the function of limiting the zones of the processed space - they do not have one.

Here are the main options found in modern robots:

— Laser sensor. A fairly popular option due to its simplicity, low cost, as well as simplicity and ease of use in fact. Usually, when installing the laser limiter, it is enough to put it on the floor and point it in the right direction. On the other hand, such devices are not well suited for creating complex borders. The classic format of the laser limiter is linear: a doorway or room is blocked by a direct beam, which is perceived by the robot as the boundary of the treated area. In addition, some models may also provide a circular mode, when the sensor forms a "forbidden zone" in...the form of a circle or sector of a certain diameter. This format of work allows to fence off the corners of rooms and small areas near the walls (a typical example is the location of a dog or cat bowl in the kitchen). If you need to create a border of a different, more specific shape, this will require several sensors at best (even though one limiter is usually supplied in the kit if supplied at all); and in the worst case, it will be completely impossible. It is also worth considering that the range of the laser in linear mode is usually limited to 3 – 4 metres; this is most often sufficient for residential premises and small offices. However, it may not be enough for a large space. And the emitters are usually powered by batteries or accumulators, the charge of which is limited.

— Magnetic tape. Limiter in the form of a tape made of magnetic material laid on the floor. Such a tape is spotted by a special sensor and is perceived by the robot as a border that cannot be crossed. For secure fixation, it is usually made self-adhesive, and the intensity of the magnetic field in most cases ensures effective operation through carpets and other similar coverings. One of the key advantages of such restraints is that almost any shape of the restricted zone can be formed from the sections of tape: the length of individual sections can be chosen at your discretion, and the maximum total length is limited only by the stock of tape at hand. In addition, this type of limiter does not require power. The disadvantages of this option include the complexity of laying in some conditions (for example, under a continuous carpet covering). In addition, at best, a very small amount of tape is included in the package; and many vacuum cleaners are not equipped with it at all, so you need to buy a magnetic tape additionally.

— Via the application. The most advanced way to limit cleaning: the boundaries of the working area are set on a smartphone or other gadget through an application that is also used for general control of the robot. Almost all models with this function also have the function of building a map of the premises (see below) — the finished map is displayed in the application, and on it the user can set the boundaries of the working area at will. The simplest version of such borders is separate straight lines. However, control applications often provide more extensive features: broken lines and polygons from individual segments, standard shapes (circle, oval, rectangle) and even the ability to draw a border by hand. Anyway, this method of restriction is extremely convenient and functional. However, robot vacuum cleaners with this capability are expensive, mainly due to the presence of a complex mapping system.

Additional functions provided in the design of the robot vacuum cleaner (see "Type").

Most often in modern robots you can find such special functions: scheduled cleaning, fall protection, obstacle sensor, object recognition, water supply adjustment, control via the Internet, remote control and video surveillance camera. Here is a more detailed description of each of them:

- Scheduled cleaning. The ability to set a schedule according to which the vacuum cleaner will clean automatically, without additional commands from the customer. At the same time, the specific features of such programming may be different, they should be specified separately. So, in the simplest models, the schedule is limited to individual hours within a day - for example, from 16 to 17; at the set hours, the vacuum cleaner is switched on every day. More advanced devices may provide a schedule for the days of the week or even for the dates of the month or year. In any case, this function greatly simplifies the use: it is enough to set the schedule once - and you can not worry about cleaning for at least a few days; especially since most models with this capability also have the function of docking...(see “Robot Configuration - Charging Station”), and the customer only needs to periodically empty the dust container (which is even more simplified if there is a docking station with a bag - see . below).

- Fall protection. Special protection that prevents the vacuum cleaner from falling off steps, high thresholds, etc. In most cases, the basis of such a system is one or more sensors located on the underside of the case. When the vacuum cleaner travels to the edge of the surface being treated, the sensor reacts to this edge - as a result, the device stops and changes direction in order to avoid falling.

- Obstacle sensor. Sensor (or sensor system) for detecting obstacles in the path of the vacuum cleaner. The specific type of such sensors can be different: ultrasonic, infrared, laser, contact, etc. However, in any case, this function allows the device to move in space, avoiding collisions and determining the best detour path. Note that models without such a sensor, for the most part, are also able to bypass obstacles - however, for this, the robot must not only stumble upon a foreign object, but try to pass through it. And only in case of failure, the trajectory changes - moreover, randomly, far from always in the optimal (or at least suitable) direction.

- Object recognition. The function of recognizing various objects on the floor that may interfere with the cleaning process. It is implemented through the presence of a front camera to adjust the optimal route for the vacuum cleaner along the perimeter of the serviced area. The camera in the design of the robotic cleaner reads the outlines of objects and allows you to bypass such obstacles. As a result, slippers, socks thrown under the bed, children's's toys and wires will no longer interfere with the movements of the vacuum cleaner. The function is of particular benefit in the presence of pets at home that are not accustomed to the tray - the robot will calmly has their waste products and keep the nervous system of pet owners healthy.

— Adjustment of water supply. Dosing system for the degree of wetting of the washing cloth in automatic mode. The ability to select the intensity of the water supply allows you to adjust the operation of the robotic vacuum cleaner for different types of floor coverings. For example, for parquet and laminate, the customer can set a low water flow rate, and for less whimsical tiled flooring, a high water flow rate. Also, the vacuum cleaner can turn off the water supply to avoid leaks, for example, when charging. In advanced models of robotic vacuum cleaners, the function of choosing an individual degree of wetting of the napkin for each of the rooms of the dwelling is often incorporated.

— Docking station with a bag. Docking station with its own trash bag. Upon arrival at such a stand, the robot can not only recharge the battery, but also carry out self-cleaning - unload the collected garbage into an external container; The capacity of the dock, as a rule, is enough for several unloadings. The convenience of this function is obvious: it allows the device to work longer without customer intervention, eliminates the need to manually clean the vacuum cleaner when the dust container is full (besides, unloading garbage from the dock is usually easier than such cleaning). True, and such opportunities are quite expensive.

- Management from the Internet. The ability to control the vacuum cleaner via the Internet - most often through a special application on a smartphone or other gadget (theoretically, such control is also possible through a web page that opens in any browser, but in practice this method is almost never used). The robot itself is connected to the network via Wi-Fi. The main advantage of this function is obvious - it allows you to give commands to the device from anywhere in the world where there is Internet access. In this way, for example, you can start a cleaning programme the day before you return from vacation in order to return to a freshly cleaned apartment. And the vacuum cleaner, in turn, can send various notifications to the customer - about the state of the battery, the progress of cleaning, the fullness of the dust container, etc.

- Remote control. A classic remote control that allows you to give commands to the device from a distance. As a rule, such a remote control covers all the main functions of the vacuum cleaner, and in many models it also allows you to directly control the movement. In any case, without remote access, it would be very difficult to control a moving vacuum cleaner - you would either have to wait until it finishes working, or catch the unit on the go. In light of this, this feature is very popular; however, on sale you can find a lot of robots without a remote control. As a rule, these are either the simplest budget devices with a random movement mode and without any additional functions, or advanced models where a smartphone / tablet with an application is used for control.
We also note that the remote controls in robotic vacuum cleaners usually work via an infrared channel - similar to remote controls for TVs, air conditioners, etc. Thus, to receive a command, the vacuum cleaner must be in the line of sight. However, in most cases this can not be called a serious inconvenience.

- Videcam. Own surveillance camera built right into the vacuum cleaner. This feature is only found on web-based models (see above); it allows you to use the robot as a remote video surveillance system and control the situation in the room, being outside and watching the picture from the camera on the smartphone screen. Also, the built-in camera can be used in the mapping system (see "Building a room map") - however, we note that not every vacuum cleaner with a built-in mapping camera has a video surveillance function.

The mapping system is provided in many modern robots. It allows you to determine the size of the room and the location of various obstacles present in it, as well as fix the route travelled by the vacuum cleaner. There are various systems according to their principle of operation, among which there are three types. Methods for building a map based on data from a sensor or a camera belonging to the basic level. But building a map using a laser rangefinder (lidar) gives more accurate results and elevates the device to a higher category. Accordingly, the presence of such a system affects the overall cost but provides several advantages. Firstly, cleaning efficiency is noticeably increased: the robot remembers which areas have already been cleaned and pays maximum attention to untreated areas. Secondly, movements are carried out along optimal trajectories, the shortest paths; this saves energy and extends battery life. Thirdly, it becomes possible to effectively clean large spaces of complex shape (for example, the entire apartment). And if the vacuum cleaner is controlled through an application on a smartphone or other gadget, the created map is displayed in this application. It gives various additional features: correcting the collected data, real-time device control, building routes, limiting cleaning through the application (see above), etc. P.

As for the methods of building maps (and further naviga...tion), there are mainly such options:

— Camera. Such systems work because the robot, using a digital camera, “examines” the room, remembering its shape and the location of objects. A fairly simple, inexpensive and at the same time practical way: usually, the camera is supplemented by an object recognition algorithm, thanks to which it can recognize obstacles stored in memory, regardless of their position in space. It is useful when you have items that are frequently moved around, such as chairs. In addition, if the map is displayed in an application on a smartphone, it looks like not just a conventional diagram but a real image, which is very convenient. The disadvantages of this option include perhaps a slightly lower accuracy than that of sensors and even more so rangefinders. However, it is not critical, and in some models, information from the camera can be supplemented with data from sensors, which completely reduces this drawback to zero.

— Sensors. Creating a map through the operation of various special sensors. Most often, such systems use sensors for obstacles and fall protection (see "Robot features"), working in conjunction with an inertial module that determines the current position of the robot in space. Receiving a signal from one of the sensors, the robot saves data on the trigger point; from such points, as a result, the map is formed. It is a fairly reliable method. It is inferior in accuracy to rangefinding cartography (see below) but it is also cheaper. The disadvantages of this type of mapping include some inconvenience when managing via the application. The map is displayed in the form of a scheme map, which is not always convenient for the user. In addition, vacuum cleaners with such systems are unable to respond in advance to a change in the situation — this change is determined only when the sensor is triggered again.

— Rangefinder (laser). Building a map using a laser range finder — lidar. Usually, such a rangefinder covers the space all 360 ° around the vacuum cleaner, scanning the space at a high frequency (hundreds and even thousands of measurements per second in all directions). It allows you to create very accurate maps in a short time and with a minimum of movement in space. In addition, the rangefinder is used not only during the initial mapping but also during further work. Thanks to this, the robot instantly reacts to changes in the environment and corrects the trajectory of movement. The main disadvantage of such systems is their rather high cost. In addition, as in the case of sensors, when controlling the vacuum cleaner from a smartphone, the map is displayed in the form of a scheme map, which is somewhat less convenient than when using cameras.

— Rangefinder + camera. It is the most advanced and functional option: the laser provides high accuracy in determining distances and a quick response to changes in the environment. And the camera allows you to create not just scheme maps but realistic images of premises that are convenient when controlled via a smartphone. The main disadvantage of such combined systems is their very high cost. Therefore, they are extremely rare, mainly in premium robot vacuum cleaners.

Cleaning area for which the robot vacuum cleaner is designed.

It is the maximum size of the room that the device can effectively process without the need to empty the dust container or charge the battery. It is worth choosing according to this parameter with a certain margin — this will give an additional guarantee in case of various emergencies. On the other hand, you should not take too much stock: after all, a large cleaning area requires more capacious batteries and capacious dust collectors, which significantly affects the dimensions, weight, and most importantly, the price of the vacuum cleaner.

As for specific figures, the most modest models nowadays are designed for 45 – 60 m2 — this corresponds to an average apartment with 1 – 2 rooms. And in the most advanced and heavy devices of this type, the cleaning area can be 300 m2 or even more.

The highest height of thresholds and various small obstacles that the robot cleaner can effectively overcome.

Most modern robots are able to effectively cope with obstacles with a height of 10 to 18 mm — this allows at least without problems to cross the edges of carpets, and small height differences at the boundaries of rooms (due to the difference in the type of coating), etc. But the models where the indicator is 20 mm or more are already referred to as robots capable of crossing high thresholds. However, even in such devices, the permissible height of obstacles does not exceed 30 mm. It is due to the fact that to overcome high obstacles, in particular, large wheels and high ground clearance are needed — and these features, in turn, increase the overall height of the robot, make it difficult to move under furniture and other low-lying objects, as well as reduce suction efficiency. On the other hand, even thin robots, whose height does not exceed 70 mm, can have very good crossing ability — for some of them, the maximum threshold height is about 25 mm.

The rated voltage of the battery used in the vacuum cleaner with the corresponding type of power supply (see above).

Initially, manufacturers select the characteristics of the battery (including voltage) in such a way that the vacuum cleaner can be guaranteed to deliver the power claimed in the specifications. Therefore, when choosing this indicator often does not play a decisive role. However, it can also be useful in such cases — for the most reliable comparison between models with different battery capacities in ampere-hours. See "Battery capacity" for details.

In addition, voltage data can be useful during operation — for example, to find a spare/replacement battery or a third-party charger.