Comparison Beko WRS 55P2 BWW white vs Beko WRS 55P1 BWW white

The volume of water used by the washing machine during a standard wash cycle. It is measured while washing the maximum amount of cotton underwear for this model with a normal programme and a temperature of 60 degrees.

When evaluating efficiency, one should consider not only the actual water consumption but also the maximum load. So, for example, a model with a load of 7 kg and a consumption of 49 litres per kilogram of laundry will be more economical than a model of 5 kg with a consumption of 40 litres: the first consumes 49/7 = 7 litres per 1 kg of laundry, the second 40/5 = 8 litres per kilogram. This moment is important, first of all, if a large amount of washing is expected.

Many modern automatic washing machines are equipped with intelligent systems that can adjust the water consumption to the actual load and avoid overspending.

The material from which the heater is made. It is a tubular electric heater that heats the water in the machine to the desired temperature. Its durability and resistance to limescale depend on the material of the heating element. The following materials can be applied to date:

— Stainless steel. The classic material, used most widely, provides good efficiency. Hovewer, steel heating elements are prone to the formation of limescale, which can disable the heater and will need to be changed. Therefore, with the high hardness of the water used for washing, it is recommended to use a special protective agent.

— With ceramic coating. The main feature of the ceramic coating is its high resistance to scale formation, due to which such heaters can last much longer than steel heaters without additional protection, even with hard water. On the other hand, machines with ceramic heating elements are more expensive, all other things being equal.

— Nickel plated. Another option is designed to reduce the formation of scale on heating elements. Such a coating ensures the durability of the heating element, while it is considered more efficient and energy-saving than ceramics because nickel has a high thermal conductivity

— No heater. The absence of any heating element in the design of the machine. This feature is typical for the semi-automatic models..., where you need to fill in water manually. Such machines are designed for relatively simple washing; they have a minimum of features and are noticeably inferior to automatic models in terms of washing efficiency. On the other hand, they are much more convenient to transport and are well suited for conditions where there is no way to connect a machine to the water supply.

This parameter characterizes the efficiency of electricity consumption by the washing machine. Classes are designated in Latin letters from A to G, in ascending order of energy consumption. At the same time, in class A there are subclasses "A+", " A++ " and "A+++"; more pluses means less energy consumption, and the most economical option to date — A +++ — outperforms class A by almost a third.

Machines of classes A + and above are today considered economical, class A — medium, lower classes — high consumption. However, indicators below A are typical for semiautomatic low-cost models. As well as for units with dryers (see above) in which high energy consumption is simply inevitable.

The type of display provided in the design of the washing machine.

The display located on the control panel provides additional convenience: it can show various information about the operation of the machine. In this case, the specific functionality of the display depends on its type. So, in the vast majority of cases, the simplest LED displays are used. They can only display numbers and some special characters, but even this is usually sufficient. In some models, TFT displays can be installed — similar to those used in smartphones. Such a display can display not only text information but also various graphics, and sometimes it is even made touch-sensitive. However, it makes sense to use such displays only in high-end washing machines with an abundance of functions.

General dimensions of the washing machine in height, width and depth.

The size of the unit determines not only the size of the space required for installation but also the ability to bring it into a particular room. At the same time, even a relatively small protruding part (like a door latch) can create problems with passing through a doorway. Therefore, in our catalogue, we try, if possible, to indicate exactly the maximum size of the machine — taking into account all the protruding parts. On the other hand, not all manufacturers provide such data. So if there is any doubt, it is worth evaluating the product by size with a certain margin. And specific information on how the dimensions were measured can usually be found in the manufacturer's documentation.

Finally, let's touch on the specifics of individual dimensions. So, in the case of front loaded machines, note that additional space in front inevitably will be required to open the door. Machines whose depth does not exceed 40 cm are considered narrow. They can be a lifesaver in cramped conditions, especially if the design provides top loading. And a height of 120 cm or more is an almost unmistakable sign of a machine with 2 drums which are located one above the other. It does not only increase capacity but also allows you to simultaneously wash two sets of things in different modes. The reverse side of these advantages is traditional...— high cost.