Comparison Tronsmart Halo 110 vs Tronsmart Halo 200

- Music Center. Music centers are stationary audio systems, including a player, amplifier and acoustics; Their distinctive feature is the speakers, made separately from the main unit. Some models may provide mounts for installing speakers on the main unit, but these mounts are quick-release, and the length of the wires allows you to place the speakers separately.

- Minisystem. Minisystems are relatively small devices made in one-piece housings; Despite their small size, they are usually designed for stationary use, although they may have independent power supplies (see below). The functionality of mini-systems can be different: some models, in fact, are speakers with slightly expanded capabilities, in others these capabilities can be comparable to full-fledged music centers and even have wireless charging.

— Radio tape recorder. The radios have a distinctive design reminiscent of cassette recorders; and some of them are even capable of working with cassettes, see "Media". Like the music centers described above, such devices have everything you need for listening - a player, an amplifier and acoustics; however, the speakers are made non-removable, and the functionality of radio tape recorders is usually more modest. On the other hand, such models are portable and can even be used to play music on the go - almost mandatory f...eatures of radio tape recorders are the presence of a handle for transportation and the ability to be autonomously powered (see below) from replaceable batteries.

— Floor system. The purpose of audio systems of this type is already clear from the name: they are initially designed for installation on the floor. This installation allows you to create fairly large devices with powerful acoustics; in fact, most floor-standing audio systems are actually a set of speakers with a built-in player. However, there are also quite compact models of this type that allow desktop or wall installation with the stand disconnected.

- For parties. Audio systems for organizing incendiary musical parties with friends and family. Such models are capable of sounding a vast space both indoors and on the street dance floor. Often, audio systems for parties are complemented by built-in lighting effects to create a disco atmosphere; microphones can also be connected to them, which karaoke lovers will appreciate. Alternative names for such audio systems are Party speaker or PartyBox.

— For musicians. Advanced speakers without light and music with good sound quality, especially for musicians who give performances on the street or participate in outdoor events. Such models are not intended for full-fledged concerts, but rather for “live” performances in public places. Audio systems often include the ability to connect musical instruments, and they are often equipped with a suitcase-type handle for ease of carrying the equipment. If it falls under the above, but there are lighting effects - For parties.

— Smart speaker. Audio systems in the form of relatively small single speakers with “smart” control electronics. For such devices, four key features can be distinguished: Internet connection (usually via Wi-Fi), synchronization with a smartphone or tablet (usually the same), support for voice commands and advanced functionality. In fact, smart speakers are not classic audio systems, but universal “assistants” with speakers for playing music; and the voice control capabilities in them go far beyond the “musical” functions. Thus, many models allow you to set a timer or alarm on a smartphone, control smart home components, receive help on a variety of requests, etc. At the same time, contextual recognition of commands is often supported, with the ability to process complex requests like “put on the band I listened to yesterday In the evening".

The maximum number of audio channels that the audio system can reproduce through its own acoustics.

— 1.0. One channel of audio allows only monophonic sound — enough to hear the sound, but not providing a surround effect. The advantage of this option is compactness, because For normal operation, it is enough to equip the device with one speaker. The single-channel format is found mainly in inexpensive models, as well as in the most compact audio systems, where small size is more important than "fancy" sound.

— 2.0. Two channels is the minimum required to play stereo sound. This format already allows you to achieve a sense of spaciousness without requiring too many speakers and complicating the entire system. Therefore, he is very popular.

— 2.1. Modification of the 2.0 format described above, supplemented by a subwoofer — a specialized speaker for low frequencies. The use of a subwoofer improves sound quality by delivering rich bass sound.

— 2.2. A further extension of the 2.1 format described above, providing for the presence of two subwoofers — this improves the reliability of the transmission of low frequencies.

— 3.1. An extended version of the 2.1 standard, in which two classic stereo speakers are complemented not only by a subwoofer, but also by a thi...rd, centre speaker. This allows you to improve the sound quality — in particular, due to a richer surround sound.

Note that 2.0 models that do not have their own subwoofer may be equipped with a subwoofer output (see below).

— Built-in memory. Own memory allows you to store and play music and other content directly using the audio system, without the use of external media (which can become damaged or lost). Such memory can be based on hard drives or SSD modules; the first option provides good capacity at a low cost, the second is faster and more reliable.

— USB port. A classic USB port, which in this case is usually used for flash drives, external hard drives or other devices with a storage function - for example, miniature audio players. USB functionality includes, at a minimum, direct playback, but may provide other capabilities, such as file sharing with the built-in memory (see above). In addition, if necessary, a connected device (for example, a pocket player) can be charged through this port.

- Card reader. A device for reading information from memory cards; Such media are very popular in modern electronics. Most often, card readers are designed for various versions of SD or microSD cards, but other options may also occur; This point should be clarified separately in each case. The purpose of this function is much the same as the USB port described above: it is primarily used for direct playback, but other functions may also occur.

- CD. Having a CD drive means at least the ability to work with d...iscs recorded in the CD Audio format (up to 74 minutes of high-quality audio, divided into tracks). In addition, modern audio systems often provide support for discs with MP3 files; In this format, one disc can accommodate an entire collection of albums, but the sound quality is lower. And sometimes it is possible to work with optical discs in DVD format.

- Vinyl records. Built-in player for playing music from vinyl records. Technically, such media are completely obsolete, but they still have many loyal fans. In addition, many audio systems with this function support recording to USB (see “Advanced”); this may be useful for vinyl owners who want to transfer their music libraries to more modern media.

In addition to those described above, modern audio systems may include other types of media. For example, some models are equipped with USB type B inputs, so they can connect to a computer via a USB connector and work as computer speakers with advanced capabilities (such as copying music from a PC to an external drive or vice versa).

The total sound power provided by the audio system at maximum volume, in other words, the total power of all the speakers provided by the device (including the subwoofer).

The higher the power, the louder the system will sound and the larger the area it can cover. On the other hand, high power significantly affects the price, dimensions, weight and power consumption of the device. In addition, when evaluating and comparing according to this indicator, it is worth considering some nuances. Firstly, some manufacturers go to the trick and give in the characteristics not the average, but the peak sound power; such numbers can be quite impressive, but they have very little to do with real loudness. So if it seems to you that the claimed power is too high, it's ok to clarify what exactly is meant in this case. Secondly, when comparing, it is worth considering the presence of a subwoofer — it plays an auxiliary role, but it can account for more than half of the total system power. Because of this, for equal total power, a device with a subwoofer may be quieter than a model without a subwoofer: for example, a 2.0 40W system will have 20W per main channel, while a 2.1 40W model may have 20W per subwoofer, and only 10 watts for the main speakers.

The number of distinct frequency ranges (bands) into which sound is divided when played through the acoustics of an audio system. For each such band, a separate speaker is provided, and sometimes several.

The simplest option provides 1 lane; it is very popular in modern audio systems, because. requires a minimum number of speakers, and the sound quality can be quite good. More advanced options provide 2-3 bands (low and high frequencies, or bass, treble and medium), and in high-end models, the number of bands can be up to five. Note that, in addition to integers, models are also produced with a fractional number of stripes — for example, 2.5 or 3.5. This marking indicates the presence in the design of a speaker responsible for two bands at once: for example, model 2.5 has separate speakers for bass and treble plus a combined bass + midrange (similar in design to bass, but also loaded with mid frequencies).

Anyway, the abundance of bands, usually, indicates a high class of acoustics: the more separate frequency ranges, the narrower the specialization of each speaker, the more accurately it is able to reproduce its part of the signal, and the more complex the system is.

The total frequency range reproduced by the acoustics of an audio system. Measured from the lower threshold of the lowest frequency speaker to the upper threshold of the highest frequency: for example, in a 2.1 system with main speakers at 100 – 22000 Hz and a subwoofer at 20 – 150 Hz, the total value will be 20 – 22000 Hz.

In general, the wider the frequency range, the fuller the reproduced sound will be, the less low and high frequencies will be lost due to insufficient acoustic capabilities. On the other hand, do not forget that the actual sound quality also depends on a number of other parameters — primarily the frequency response. In addition, human audible frequencies range from 16 Hz to 22 kHz; deviations from these values are very small, and the upper limit also decreases with age. Therefore, from a practical point of view, it does not make sense to provide too large a frequency range; and impressive performances like 10 – 50000 Hz, found in top-class models, are usually more of a kind of "side effect" of high-quality speakers (and at the same time — a marketing ploy) than a really significant moment.

Bass boost function for powerful and rich bass. Often implemented as a single button, with which you can actually "turn the bass on and off." This is more convenient than adjusting the low frequencies using the equalizer; in addition, various special technologies can be used to enhance the bass.

— Omnidirectional sound. As the name suggests, audio systems with this feature emit sound evenly in all directions, covering a 360° space. Thus, the device can be installed in the center of the room and evenly “fill” it with sound, which will be clearly perceived at any point. On the other hand, an omnidirectional system usually sounds in 1.0 format (mono); the design may include various tricks to ensure surround sound, but such systems still fall short of full-fledged stereo in most cases.

— Voice assistant. Support of the audio system of the voice assistant. The most popular assistants nowadays are:

• Google Assistant
• Apple Siri
• Amazon Alexa

However, other solutions can also be used. In any case, it is worth noting that we are not talking about the function of the audio system itself, but about compatibility with smartphones, tablets and other gadgets that have their own voice assistants. Thus, to use the voice assistant, you will have to connect the audio system to an external device. On the other hand, the capabilities of such assistants are usually more extensive than those of built-in voice control systems (see below); advanced functions are often supported, such as natural speech recognition with complex queries (“Play the latest album of the band ... that I listened to”), voicing the weather forecast, sports results, etc. Of course, the specific set of supported commands and languages may vary - depending on the voice assistant and its version.

— Voice control. A function that is practically mandatory for smart speakers (see “Purpose”) and is almost never found in other types of audio systems. As the name suggests, this control allows you to control the device using voice commands. It differs from the voice assistant (see the corresponding section) in that in this case we are talking about the simplest commands related to the main functionality of the audio system - for example, “Stop”, “Continue”, “Next track”, etc. It is worth keeping in mind that voice control almost certainly supports English, but the ability to recognize other languages should be clarified separately.

— Mobile application. The ability to control the audio system from a smartphone, tablet or other gadget with a special application installed on it. As a rule, the connection is via Wi-Fi (see "Interfaces"). The convenience of this function is not only that the system can be controlled remotely - the application is often more convenient and provides more options than the controls on the radio itself.

— Multiroom support. The device supports Multiroom technology. This technology allows you to create a single wireless network in your home from several speakers placed in different rooms, and simultaneously play music in all of these rooms. The specific features of such networks may be different in different models, they should be clarified separately. So, some devices use a Bluetooth connection, others - via Wi-Fi (directly or via a local network). In some cases, the control speaker broadcasts sound to all the others, and the same music plays throughout the house, in others, the speakers are "equal", and different tracks can be played simultaneously in different rooms. Some audio systems require an external sound source (smartphone, tablet, etc.), others are capable of playing the role of a player themselves, including for streaming Internet services.

— Karaoke.... A popular entertainment that allows users to sing their favorite songs to a backing track (musical accompaniment with the original vocals cut out) — so that the vocals superimposed on the backing track are reproduced through the acoustics of the audio system. This function requires at least one microphone input.

— Karaoke Mix. An extended version of karaoke (see above), providing various additional options — for example, assessment of performance skills in points, singing competitions, etc. As a rule, it allows you to connect two microphones.

— Internet radio. The ability to listen to Internet radio stations on the audio system. In general, such broadcasting is similar to conventional broadcasting, but it is carried out not via radio, but via the World Wide Web, which provides some additional opportunities. Thus, Internet broadcasting has no restrictions on range and range, allows you to listen to programs from any country and in any language; and the list of broadcasters is extremely extensive, among them there are both traditional radio stations duplicating their broadcasts on the Internet, and specific, purely network projects. The presence of this function assumes support for at least one network interface - Wi-Fi or LAN (see "Interfaces").

— Recording to a USB drive. The ability to operate the audio system in recording mode to an external USB device, such as a flash drive. This allows you to record your favorite radio programs from a regular tuner or Internet station (see above), copy music from optical discs, etc.; specific USB recording capabilities depend on the audio system model.

— Clock. A regular clock is a device for displaying time, most often in the form of numbers on a display. Sometimes it is precisely such a clock that turns out to be the most convenient. In addition, this function is necessary for some other features — primarily an alarm clock (see below).

— Alarm clock. A classic alarm clock that gives a signal at a set time. It can be useful not only for waking up, but also in other cases when it is necessary to warn the user about the onset of a certain time. The peculiarity of this function in audio systems is that the signal can be the switching on of a certain radio station or musical composition.

— RCA. The RCA interface uses coaxial cables with characteristic "tulip" plugs and corresponding connectors. It can be used to transfer different types of data, however, in this case, it means connecting the audio signal from the preamplifier in analogue format, one channel of audio per connector. RCA is widely used in modern audio technology, but its resistance to interference is very limited.

— Mini-Jack(3.5 mm). Standard connector for most modern portable audio equipment. In audio systems, it is mainly used to connect such equipment — primarily pocket media players. It uses analogue signal transmission, while the resistance to interference, like RCA, is not high, and the quality may even be lower due to the fact that both channels of stereo sound are transmitted over the same cable.

— Coaxial S / P-DIF. An electrical version of the S / P-DIF standard, using a coaxial cable with a “tulip” connector for signal transmission. Do not confuse this interface with the analogue RCA described above — despite the identity of the connectors, these standards are fundamentally different: "coaxial" works in digital format and even multi-channel audio can be transmitted over a single cable. Compared to optical S/P-DIF, this interface is less resistant to interference, but more reliable because electrical cables are not as delicate.

— Optical. One of the va...rieties of the S / P-DIF standard is, along with the coaxial one described above. In this case, the signal is transmitted via a TOSLINK fibre optic cable. The main advantage of this interface is its complete insensitivity to electrical interference, while its capabilities are sufficient even to work with multi-channel audio. Among the shortcomings, it is worth noting the high price of connecting cables, as well as the need for careful handling of them.

— Under the microphone. Input for connecting a microphone to an audio system; can use different types of connectors (3.5 mm mini-Jack, 6.35 mm Jack, etc.). This function is mandatory for models with karaoke (see "Advanced"), but can be used for other purposes.

— Instrumental. Connectors used to connect musical instruments (acoustic or bass guitars, keyboards, etc.). Most often they are made in the form of 6.35 mm Jack format sockets. The audio signal from pickups has its own specific characteristics, so the instrument input typically features a higher input level and special impedance matching to ensure optimal sound quality.