Comparison Lenovo Legion Active Gaming 17 vs Lenovo Legion Armored Backpack II 17

— Chest strap. Attachment in the form of a strap with a clasp that connects the main straps of the backpack at the level of the user's chest. When fastened, such a strap keeps the straps at the same distance from each other and does not allow them to “scatter”. This provides additional convenience in the distribution of weight, as well as a secure fit on the body: it is almost impossible to remove the backpack without unfastening the strap. To adjust to a specific user, the chest strap is often made adjustable.

— Adjustment of the chest strap. The ability to adjust the height at which the chest strap of the backpack is located. This function allows you to choose the optimal location of the screed, taking into account the height and physique of the user; while the range of adjustment is usually quite extensive. However in some models (especially inexpensive ones), adjustable ties can spontaneously move when accidentally touched, knocking down the height settings; however, this shortcoming is usually not critical.

— Top straps. Tie-down straps located at the top of the backpack. They are mainly intended for fixing the upper valve, as well as for adjusting the volume of the upper part of the backpack, similarly to the side straps described below (moreover, such adjustment can also be provided in models that do not have a valve).

— Side straps. Tie straps located on the sides of the backpack — usually one on each side, however, in large tall models, there may be two on the side. The main function of such straps is to “compact” the backpack if it is not completely filled: by tightening the side ties, you can reduce the thickness of the backpack so that the contents are tightly fixed and not dangling inside. In addition, the side tie is convenient to use in combination with the bottle pocket for carrying long items, such as an umbrella or a mat: the lower part of such an item fits into the pocket, and the upper part can be fixed with a tie.

— Front straps. If the purpose of the ties described above is primarily to adjust the volume, then in the case of front ties they can be described as an additional fastening for placing things. They are two horizontal "belts" at the top and bottom of the backpack, under which you can fasten outerwear (similar to the principle with an elastic cord), a mat or other voluminous things, such as a snowboard. However, for the latter, these ties are not specialized and storage of the board in them is less convenient than in personal mounts. Naturally, the screed also fulfills its main function — it tightens the walls of the backpack, making its shape more “slender” and compact.

— Bottom straps. Tie-down straps located on the underside of the product. They allow you to adjust the volume of the lower part of the backpack (or the lower pocket), provide additional support and fixation of the contents, and in some models they can also be used as a fastener for carrying various items “on an external sling”: for example, you can put ties into stretched to the maximum size karemat and tighten the straps, securely securing the outer load.

— Waist belt. An additional device in the form of a belt, which, when fastened, covers the user's body in the area of the belt. The specific design of this part may vary. So, in relatively small backpacks, it is just a strap made of nylon or other similar material, and in large volumetric models, two wide and thick “petals” are provided that are adjacent to the user’s sides and are interconnected by a small strap with a clasp. Anyway, the main function of the waist belt is to redistribute the load: it allows you to transfer the load from the shoulders to the pelvic area, which is especially convenient when carrying heavy loads. In addition, such a device provides additional reliability of fixing the backpack on the body.

- Sealed. This feature means that the backpack can be hermetically sealed, preventing water from getting inside (not to be confused with the included rain cover). In addition, such models are usually made of waterproof materials. Such properties can be indispensable in conditions of high humidity - for example, when rafting down a mountain river, when splashes constantly fall on things in the boat.

— Rolltop closing method. A special method of closing the backpack, allowing you to adjust its height and actual volume depending on the degree of fullness. The Rolltop backpack has the appearance of a bag with a soft upper part, which, when closed, rolls into a characteristic roll and is secured with a special fastener. This design, when closed, closes the backpack very tightly and reliably (almost hermetically), and when open it provides a wide neck, making it easier to access the contents of the bag; and there are much fewer fasteners in such backpacks than in traditional ones, which significantly simplifies use and reduces cost. At the same time, for a number of reasons, this design is considered suitable mainly for urban models; in other types of backpacks it is much less common.

— Top valve. Initially, the top flap is a piece of fabric that covers the top of a closed backpack and provides additional protection (mainly from ba...d weather). However, in modern backpacks this part is often equipped with its own pockets and actually represents an additional slot; in some models, such a slot is even removable and can be used as a separate handbag.

— Side opening. Possibility of access to the contents of the backpack through a clasp or flap on the side. This feature is especially relevant for roomy models that have a large height: you do not have to disassemble all the contents lying on top to get to the things at the bottom of the backpack.

— Bottom opening. The presence of a fastener at the bottom of the backpack, which provides access to its contents from below. The purpose of this function is similar to the side opening (see on top): to facilitate access to things located at the bottom of the backpack. It is especially useful for high-volume models, although it can also be useful for a relatively small product for urban or sports purposes. There is also a slightly different design option: the lower clasp opens not into the main slot, but into a small slot separated by a partition (the partition can be made opening, or even removable, which allows you to combine the lower slot with the main one).

— Front opening. Another additional way to access the contents of the backpack is through the clasp on its front side (opposite the back). Much the same as the side opening described on top, but the opening on the front can be made larger, making it easier to both access contents and load bulky items.

— Full opening. The possibility of full opening provides convenient access to the entire contents of the backpack. In practice, it is usually implemented using special designs of locks and zippers that run along the entire perimeter of the product. The backpack opens like a book, allowing you to quickly and easily access the items you need without removing all the contents. At the same time, this design solution makes it easier to organize the packing of things when packing them into a backpack.

— Output of the drinking system. Possibility of installing a sports drinking system in a backpack. This system consists of a soft synthetic container for water, with a capacity of up to several liters, and a tube with a valve. Accordingly, to install it, the backpack must have a slot for the container, a hole for the tube to exit, and a device for fixing it from the outside. The tube is usually secured to the backpack strap within easy reach; thanks to this, you can take a sip of water at any time without stopping or being distracted by opening/closing your backpack, which is especially useful on long hiking or cycling trips. The drinking system itself is usually not included in the package, but there are exceptions (see “Hydrator included”).

— Possibility of folding. The ability to compactly pack a backpack - for example, in a special case or tube. A useful feature if you need to travel with an empty backpack: transporting it packed in this case is often more convenient than carrying it on your shoulders without a load. The possibility of folding is found mainly in sports models (see “Purpose”).

— Change in volume. Possibility to increase/decrease the volume of the backpack. Most often, this function is provided by unfastening the zipper along the perimeter of the model itself (in fact, the volume of the main slot increases according to the principle, as is done in suitcases), there are exceptions with the location of the zipper at the bottom or front. Do not confuse changes in volume with screeds. In this case, changing the volume physically increases the size of the backpack by releasing hidden (folded or zipped) parts of the main or additional slot.

— Single-strap. Backpacks that have one strap and are designed to be worn over the shoulder. Single-strap products are found both among youth urban models and in specialized categories of backpacks, in particular tactical ones (see “In the direction”). This design not only provides the backpack with an original appearance, but also provides some very practical advantages. Thus, a single-strap backpack can be easily moved on the stomach - for example, to get something out of it, or for convenience in public transport. Also, such a product is more convenient when shooting with a rest on the shoulder than a classic backpack (of course, if you rest the weapon on a shoulder that is not covered by a strap). And for additional convenience, the design may include a side belt. On the other hand, single-strap backpacks do not distribute weight as evenly as classic backpacks and are not well suited for carrying heavy loads; therefore their volume is usually small.

— Attachment to a suitcase. The presence of a special belt that allows you to attach the backpack to the handle of the suitcase, thereby facilitating transportation.

— Elastic cord. Elastic cord attached to the front of the backpack in special loops. The main function of this part is to carry large items that do not fit in a backpack or that need quick access. For example, using a cord, you can fix a mat, bike helmet, jacket, etc. In addition, this function can be useful for more specific tasks — for example, drying washed clothes on the go. And in some models, the cord also works as an addition to the ties: by tightening it, you can seal the backpack that is not completely filled, reducing its size and not allowing the contents to hang out inside.

— Mount for skis. A special mount that allows you to securely fasten skis to a backpack. If you are going to use a backpack in winter, it may make sense to pay attention to the presence of this item of equipment.

— Mount for the board. A special mount that allows you to securely fasten a snowboard or skateboard to your backpack. The specific specialization should be clarified separately, however, anyway, this feature greatly simplifies the transportation of the "board" — it does not need to be carried in the hands, while the fixation is very reliable. Usually, the mount can be adjusted to the size of a particular board.

...— Helmet mount. Special fastening for a protective helmet. Most often, such a mount refers to the LidLock system, designed for bicycle and other similar helmets that have holes in the shell. The main element of LidLock is a plastic plate on an elastic strap: such a plate is threaded into the hole of the helmet “sideways”, and then installed across the hole and, due to the elasticity of the strap, keeps the helmet on the backpack.

— Loops for equipment. Loops designed to secure special equipment, for example, "ice" — ice axes or walking sticks. Most often located on the sides of the backpack and can be adjusted in size.

— Folding chair. An original function characteristic of easel-type backpacks, designed primarily for hunting and fishing. The frame of such backpacks is used for its intended purpose during transportation, and at stops you can remove the bag and unfold it, turning it into a seating device.

— USB interface. Standard USB connector located on the outside of the product. Allows you to charge smartphones, tablets and other gadgets without unpacking your backpack — the main thing is that you have the appropriate cable at hand. Of course, for such charging, you will need a power bank or other source of energy connected to the USB port from the inside; such a source is usually not included in the delivery set.

— Mini-Jack connector (3.5 mm). A standard 3.5 mm mini-jack audio jack is located on the outside of the backpack, in some models right on one of the straps. From the inside, you can connect a smartphone, media player or other similar signal source to this connector, and headphones or portable speakers from the outside. Thus, this function allows you to listen to music without getting into your backpack once again and without taking the signal source out; this is especially convenient if a large gadget such as a tablet or laptop plays the role of a playback device.

— Raincoat included. A raincoat is a waterproof cover made of thin fabric worn on a backpack as additional protection against moisture during rain or snow. It is worth noting that most backpacks are initially made of water-repellent materials that can withstand precipitation to a certain extent. Therefore, it is especially worth looking for a model with a rain cover in the kit if there is a chance during a hike to get caught in heavy rain or stay in a damp atmosphere (fog, drizzle) for a long time.

— Reflective elements. Additional inserts on the outside of the backpack, made of a special reflective material. Such elements are located at least on the straps and on the front of the product, but can also be provided from the sides. Their main function is to make a person more visible on the road at night. So, in the dipped headlights, the driver notices a pedestrian in ordinary clothes for 20-50 m (depending on the colour of the clothes), and if there are reflectors, this distance increases to 100 m or more. Thus, reflective backpacks greatly increase safety on the road; and in some countries the wearing of reflectors is even mandatory for pedestrians at night.

— TSA lock. The presence in the backpack of a lock that is compatible with the TSA (U.S. Transportation Safety Administration) standard. The peculiarity of this lock is that it has two ways of opening and closing — normal and "service". In normal use, the lock is opened and closed using a digital code; and for opening in a “service” way, a special universal key is used that is compatible with all TSA locks. Only customs officers, security services and other personnel authorized to inspect luggage have such keys. Thanks to this, if necessary, an authorized employee can check the contents of the backpack even if the owner is not nearby, while there is no need to break the lock and disable it — after the inspection, the backpack can be closed back. To date, TSA keys are used by US, Canadian, UK and Israeli Customs. So backpacks with such locks can be useful at least for traveling to these countries.

— Combination lock. It can be either a built-in fixture or an external padlock, hooked onto zipper sliders connected together. This feature makes it much more difficult to access the contents of the backpack and provides additional security if it falls into the hands of strangers. Of course, the lock will not protect the product from deliberate tampering, but it will become a serious obstacle for those who would like to search it quickly and discreetly.

Note that this item does not cover locks that meet the TSA standard — their...availability is indicated separately in our catalog, and the features are described in the corresponding item below. — RFID protection. The presence in the backpack of a pocket or compartment with special protection against reading RFID tags. Such tags are used, in particular, in contactless credit cards using PayPass or PayWave technology; in this case, the communication range is several centimeters, and an attacker with a special scanner, getting close (for example, in a crowded transport), can read credit card data even through the fabric of a backpack. RFID protection prevents such troubles: it shields the cards inside the pocket, making them unscannable from the outside.

— Metal cable. A sturdy metal cable with a lock that allows you to attach the backpack to an immovable or heavy object, such as a lamppost in a park or a table leg in a cafe. For convenience and compactness, such an “anti-theft system” is often built right into the strap. First of all, it serves as protection against thefts “on a jerk”: a thief will not be able to quickly grab a “tied” backpack and run away with it, and it will be very difficult to quietly steal the prey. And cutting the cable, unlike the usual webbing, is not so easy, this requires a special tool and a margin of time. In addition, on some models, the cable can also lock the zippers in the closed position, preventing unauthorized access to the contents.

— Hidden zipper. In models with this feature, the zipper that closes the main compartment is located not on the outside of the backpack, but on the back. Thus, when wearing the product on the shoulders, the clasp is between the back of the backpack and the back of the user, and the thief will not be able to secretly unfasten the backpack and get to the contents from the owner.

— Protection against cuts. Protection that increases the backpack's cut resistance. Usually it looks like a strong metal mesh sewn into the lining of the product. Such a mesh resists well at least miniature devices like a sharpened coin, which are most often used by pickpockets; and in some models, it can even stop a knife or other “serious” cutting tool.

— Rigid front panel. Front panel (panel on the opposite side of the back), made of durable plastic or other rigid material, such as aluminium. Such a panel is almost impossible to pierce or cut unnoticed by the user, besides, it plays the role of a kind of "shell", protecting the contents of the backpack from bumps and falls. And in some models, the rigid panel also performs a decorative function, giving the backpack an original look; this is especially useful if the product belongs to the "gaming" series, suggesting an unusual, eye-catching style.

— Compartment for a laptop. Compartment dedicated to transporting laptops. Usually, it looks like a separate compartment with dense soft walls — thus, the laptop inside does not hang around the backpack and receives additional protection from shocks and shocks. Note that different models with this function may have different restrictions on the maximum diagonal of the laptop (see below); therefore, before buying, it's ok to check whether the backpack will be compatible with your device.

— Top pocket. The presence of a separate upper pocket, most often on the valve. In such a pocket it is convenient to keep relatively small but important things to which it is desirable to have quick access: a flashlight, a first aid kit, a map, etc. Also, this compartment can be useful for fragile things, because. Due to its location, it is slightly susceptible to impacts and concussions. For better protection, it can even be dense (hard).

— Front pocket. The presence of a pocket on the "outer" side of the backpack (opposite back). The purpose of such a pocket is generally similar to the top one, however, in many models its design is such that it is most convenient to put flat things inside — documents, books, etc. In urban backpacks, the front pocket can also be called an additional compartment, fenced off from the main wall and having its own fastener.

— ...="/list/74/pr-36945/">Crab pocket. A detail that is not so much a pocket as a mount of a special design. In general terms, it can be described as a piece of fabric attached to the front of the backpack with elastic bands and/or fastex straps. Under this piece of fabric, the contents of the “crab” are placed, which is securely fixed by tightening the straps. In this way, it is very convenient to carry relatively large and pressure-resistant items that need quick access — for example, a jacket, a hat with a scarf, a bicycle helmet, etc.

— Side pockets. The presence of pockets on the sides of the backpack. Their general purpose is the same as for any individual pockets: the placement of relatively small things that you want to have quick access to, or that can be "lost" in the vast space of the main compartment. Like the front ones, they are not recommended for fragile things. Unlike bottle pockets (see below), classic side pockets are made of dense fabric and usually have the ability to fasten.

— Bottom pocket. Like the front pocket (see above), such a pocket is located on the front side of the backpack, however, it is located in its lower part, near the bottom (in fact, some models have both a front and bottom pocket). Another difference is the size: the bottom pocket is relatively small and is intended more for every “little thing” than for large flat items. And in some models, the role of the lower pocket is played by a part of the main compartment, separated from the rest of the volume by a partition; such a partition can be made unfastened, which allows, if necessary, to combine the lower pocket with the main compartment, and use the fastener of this pocket for lower opening (see "Design"). Anyway, the lower part of the backpack is most susceptible to shock and compression, so it is not recommended to store fragile items in it.

— Weapon pocket. Pocket for carrying firearms. Usually, it is located on the outside of the backpack and is used to “hide” the butt of a long-barreled weapon. It can be supplemented with couplers for fixing the trunk. Also, this term means the presence of a pocket with a holster or an adaptive pocket for a particular type of weapon (for example, a pistol or a submachine gun).

— Bottle pocket. A variation of the side pocket (see above), without a fastener and open at the top. The role of the latch is usually played by an elastic band in the upper part of the pocket, and the pocket itself can be made of mesh. In such compartments it is convenient to keep not only a bottle, but also other things of a similar shape that need quick access — for example, an umbrella. Also note that such pockets are convenient to use in combination with side ties; see "Cables and straps" for more details.

— Pocket on the back. Pocket located on the back of the backpack. Designed for small but valuable items such as money or documents. The convenience of such a pocket lies in the fact that it can be reached only by removing the backpack; Thus, while the backpack is on your shoulders, you can not be afraid that an attacker will quietly unfasten the clasp and steal valuable contents.

— Pocket on the waist belt. A separate pocket located on one of the halves of the waist belt (see "Cables and belts"). Usually can be fastened tightly. The volume of such a pocket is very small, but it has an important advantage: you can quickly and easily get to the contents without removing the backpack and without even unfastening the latches on the ties (whereas in other pockets this may require some skill or even outside help). This makes the waistbelt pocket perfect for small items that you need to have constant access to while on the move, such as a phone or a compass.

— Webbing pocket. A pocket located directly on the strap — usually in the user's chest area (when carried in the normal position). Similar to the pocket on the waist belt described above, it is designed to store small things that you want quick access to (flashlight, food bar, etc.); however, this pocket is usually made open and differs in shape — it is usually high and narrow, under the shape of the strap itself.