The suction power provided by the vacuum cleaner. For models with power adjustment (see below), in this case, the maximum value is taken into account. Note that "suction power" is sometimes erroneously also called the suction force, indicated in pascals; see below for more details.
Suction power is a key indicator that determines the capabilities of the unit: the higher it is, the more efficiently the vacuum cleaner can draw in various contaminants, and the better it handles with carpets, fabrics and other materials into which dust can penetrate deeply. On the other hand, high power inevitably affects the weight, power consumption, dimensions and price of the device. Therefore, it does not always make sense to chase the maximum values — you need to take into account the real working conditions and the general purpose of the vacuum cleaner.
The specific numbers found in this paragraph largely depend on the type of device. For example, in handheld household models, suction power
does not exceed 100 W,
and for conventional household units, an indicator of 100 – 150 W is still considered very limited. At the same time, we note that the minimum required for a full-fledged dry cleaning of smooth floors is considered to be
300 – 350 W,
for carpet and other short pile coatings — 350 – 400 W, and for long pile materials and upholstered furniture
higher rates are desirable. Vacuum cleaners with lower suction power values are intended not so much for periodic cleaning, but for constant (ideally daily) maintenance of cleanliness in an already tidy room.
As for the relationship between suction power and suction force, it is as follows: power is the suction force (thrust) multiplied by the airflow (performance). Without going into too much detail, we can say that the efficiency of the vacuum cleaner is determined by both of these indicators. And it is worth evaluating this efficiency by suction power (regardless of the specific relationship between traction and performance).
The suction force provided by the vacuum cleaner. It is indicated by the maximum vacuum (negative pressure) that the unit can create at the working nozzle.
Note that this parameter is sometimes confused with the suction power described above, which is indicated in watts. Yes, suction force to some extent determines the efficiency of the unit. However, this efficiency also depends on the performance (airflow). And the suction power, indicated in watts, takes into account both of these parameters — it is determined by multiplying the suction force by the performance (see above for more details). For this reason, there is no strict relationship between this force and suction power: for example, a vacuum of 25,000 Pa can be found in models with 250 W, 200 W and even 150 W of power.
As for the practical significance of this spec, in general, a higher suction force allows you to work more efficiently with high resistance. For example, when processing carpets with a long pile. On the other hand, more pascals (with the same number of watts) means less airflow and, accordingly, less efficiency for large amounts of work at low resistance (for example, cleaning large rooms with parquet floors). Thus, it makes sense to pay attention to this indicator mainly in cases where high suction force is fundamental for you. In other cases, it is worth evaluating the capabilities of the vacuum cleaner in terms of suction power in watts.
Note that for a number of
...reasons, the suction power is most often specified for robot vacuum cleaners (see “Produc type”). For such models, a value of 1500 Pa and below is considered very small, 1500 – 2000 Pa — medium, 2000 – 2500 Pa — high, more than 2500 Pa — very high.
It is also worth mentioning that the indication of suction force is often used as a publicity trick — to improve the impression of the product. For example, the suction power of 150 watts in itself is quite modest. But at the same time, the suction force of such a vacuum cleaner can be 25,000 Pa — a very impressive figure, especially for an inexperienced buyer, but having a very indirect relation to real efficiency. Especially often, such tricks are used among upright models and the already mentioned robots — these varieties initially do not differ in high power in watts. For many of these units, the characteristics only indicate the vacuum in pascals without specifying the suction power. It further enhances the impression: for example, in the specs of a modest robot, the figure "3000 Pa" looks much more impressive than "40 W". However, such figures have a very weak relation to the real capabilities of the unit and if they are not supplemented by data on suction power in watts, they should be considered solely as bait for a not particularly sophisticated buyer.The nominal volume of the dust collector installed in the vacuum cleaner.
This indicator largely depends on the type of unit (see above). For example, in most handheld household models, the capacity
does not exceed 0.5 L. The volume of the container in upright vacuum cleaners and robots can be somewhat larger — among the first variety there are quite a few models for
1 – 2 liters or even more, and among the second — by
0.6 – 1 liter and a little more. For conventional vacuum cleaners, the minimum figure is actually about 0.8 – 1 L; dust collectors for 1 – 2 L and
2 – 4 L are very popular in such devices; the maximum capacity is actually
4 – 6 liters — units of a similar layout, but with a larger capacity, are usually referred to as household ones. In turn, relatively small containers are occasionally found among workshop models. However, in vacuum cleaners of this type, the capacity is generally quite large — it can reach
26 – 50 liters or even
more ; the same applies to industrial (construction) units.
In general, a larger dust container allows you to work longer without interruptions. On the other hand, a capacious container itself takes up more space and, accordingly, affects the size, weight and price. So when choosing th
...is parameter, it is worth considering the actual features of the use of a vacuum cleaner. Here we can give such an example: for a full-scale cleaning of an average city apartment, a capacity of about 1 – 1.5 litres is required. Thus, say, a 4-litre bag allows you to carry out two such cleanings with sufficient efficiency without unloading the vacuum cleaner. There are more detailed recommendations regarding the optimal volume of the dust collector, including specific cleaning options. These recommendations can be found in special sources.Additional modes of operation provided by the robot cleaner (see "Product type").
First of all, let us clarify that the standard modes, in this case, include two formats of cleaning at standard power — continuous, in which the vacuum cleaner carefully cleans the entire room (or its specified area), and chaotic, in which it moves randomly within the working area. Other ways of working are considered additional; their list is given in this paragraph. Among the most common additional modes are
spot cleaning (Spot),
perimeter cleaning (Edge),
and turbo mode. In addition, a fairly popular function is the Zigzag. Here is a detailed description of the different options:
— Spot cleaning (Spot). A mode that allows you to use the vacuum cleaner for targeted cleaning of a relatively small area of the room — for example, when spilling a small amount of debris. Most often, this programme works as follows: the robot moves to the centre of a user-defined zone, and then starts moving from this point in an expanding spiral and stops at a given distance from the starting position.
— Perimeter cleaning (Edge). A mode that allows you to start the vacuum cleaner around the perimeter of a given zone. By the name, it is mainly used for cleaning along the walls of the room: a lot of dirt accumulates in these places, which are difficul
...t to remove when using standard cleaning modes.
— Turbo mode. Power mode for more suction force. Usually, the movement of the vacuum cleaner, in this case, can be carried out according to any programme available in the settings — both standard (combing, random movement) and additional (Spot, Edge, Zigzag). Anyway, the turbo mode is useful primarily for cleaning carpets and other floor coverings with pile, for which the standard power of the vacuum cleaner is not enough. However, working at increased traction increases the load on the unit and increases its wear. Therefore, most models have restrictions on the maximum time of continuous operation in turbo mode and sometimes on the minimum duration of breaks between switching on this mode.
— Zigzag. Zigzag movement is a kind of transitional variant between the orderly combing of the room and the random choice of direction. Zigzag allows you to achieve greater efficiency than chaotic movements. In addition, with such a movement, it is easier to compensate for the presence of various obstacles and ensure thorough cleaning of the entire given area.Cleaning area for which the robot vacuum cleaner is designed.
It is the maximum size of the room that the device can effectively process without the need to empty the dust container or charge the battery. It is worth choosing according to this parameter with a certain margin — this will give an additional guarantee in case of various emergencies. On the other hand, you should not take too much stock: after all, a large cleaning area requires more capacious batteries and capacious dust collectors, which significantly affects the dimensions, weight, and most importantly, the price of the vacuum cleaner.
As for specific figures, the most modest models nowadays are designed for 45 – 60 m2 — this corresponds to an average apartment with 1 – 2 rooms. And in the most advanced and heavy devices of this type, the cleaning area can be 300 m2 or even more.
The highest height of thresholds and various small obstacles that the robot cleaner can effectively overcome.
Most modern robots are able to effectively cope with obstacles with a height of 10 to 18 mm — this allows at least without problems to cross the edges of carpets, and small height differences at the boundaries of rooms (due to the difference in the type of coating), etc. But the models where the indicator is 20 mm or more are already referred to as robots capable of
crossing high thresholds. However, even in such devices, the permissible height of obstacles does not exceed 30 mm. It is due to the fact that to overcome high obstacles, in particular, large wheels and high ground clearance are needed — and these features, in turn, increase the overall height of the robot, make it difficult to move under furniture and other low-lying objects, as well as reduce suction efficiency. On the other hand, even
thin robots, whose height does not exceed 70 mm, can have very good crossing ability — for some of them, the maximum threshold height is about 25 mm.
We emphasize that in this paragraph we describe the functions of the vacuum cleaner nozzles and not the types of nozzles themselves. It is because one device can have several functions at once: for example, a crevice nozzle, which is also used as a dust nozzle. So the total number of nozzles may differ from the number of items in this list. Although exceptions are possible (when several nozzles of the same type are supplied in the kit, differing in size).
The main functions found in the nozzles of modern vacuum cleaners are as follows:
combined (floor/carpet),
crevice (including telescopic crevice),
dust brush,
for sofa,
parquet,
turbobrush(regular,
mini turbobrush or
electricturbobrush . However, sometimes the best choice is
vacuum cleaners without turbobrushes, and for handheld vacuum cleaners —
angle brush,
microfibre,
mop,
floor polisher (for wiping),
for mattresses,
for animals,
twister for hose,
siphon nozzle,
...f="/list/90/pr-41987/">flexible hose and
tool adapter. For robots, side brushes are important, which can be one or
two. Here is a detailed description of these, as well as some other features:
— Side brush. Function found exclusively in robots (see "Product type"). Such a brush protrudes to the side beyond the body and captures the space on the side. It increases the overall width of the operating area and allows you to effectively clean places that are inaccessible to the main brush of the robot (which is located at the bottom of the body). Typical examples of such places are the space near the walls of the room and at the bases of cabinet furniture, crevices under baseboards, etc. Note that this option is indicated when there is only one side brush; the presence of a pair of such brushes is specified separately (see below).
— 2 side brushes. The presence in the robot vacuum cleaner of two side brushes on both sides of the body. See above for more details on the side brush as a whole. This design option slightly increases the cost but significantly improves efficiency compared to a single side brush. The width of the operating area is evenly increased. And when cleaning hard-to-reach places, it does not matter which side the vacuum cleaner is turned to such a place — there is an additional brush on each side.
— Combined (floor/carpet). A function that allows you to use one nozzle for dry cleaning of various types of floor coverings — both hard (linoleum, parquet, laminate, tiles ...) and carpets. Accessories with this function are extremely popular. They are found in almost all conventional vacuum cleaners (see "Product type"), in many household vacuums, as well as professional models (except hand-held industrial and fireplace vacuum cleaners). The nozzle itself usually has a T-shape, rather large dimensions and a swivel mount that improves mobility. And adjustment for different types of surfaces is carried out due to the retractable brush. The bristles of such a brush are convenient for cleaning hard surfaces. And when cleaning carpets and other fleecy materials, the brush can be removed so that the nozzle fits snugly against the pile and effectively draws dust and small debris out of it.
— Crevice. This function means that the nozzle is equipped with a flat working part with a narrow slot at the end. This design is suitable for cleaning hard-to-reach places — spaces between pieces of furniture, crevices under baseboards, gaps between radiator sections, etc. The width of the crevice nozzle (and, accordingly, the length of the crevice) usually does not exceed the diameter of the vacuum cleaner pipe, but the length of the flat part can be different. Moreover, each option has its advantages: long models can reach further into narrow gaps, while short ones are more manoeuvrable and more comfortable in general.
— Dust. A function that allows you to collect dust from small hard surfaces, such as armrests of chairs, picture frames, lamp shades, etc. Traditional accessories with this ability are in the form of small round brushes but there is another variety — wider nozzles (also with brushes), somewhat similar to a smaller version of the floor/carpet format fixtures (see above). The second variety is often referred to as furniture nozzles. Some of these accessories have removable bristles and can be used as nozzles for a sofa (see below).
— For sofa. A function that allows you to effectively clean the upholstery furniture and other similar items — mattresses, car seats, etc. Brushes with this function can have different designs and application features. The simplest option is a T-shaped device, similar to a reduced combination nozzle (see above), which does not have bristles, but is often equipped with strips of the fine pile — they effectively collect hair and wool from the upholstery. Some of these devices are equipped with removable bristles and can also be used as dust ones (see above). A more expensive and advanced option is beater brushes that provide additional impact; this effect increases efficiency, allowing the removal of dust and other small contaminants even at fairly great depths. Also, some turbobrushes and mini turbobrushes may be intended for upholstered furniture (see below). For vacuum cleaners equipped with such accessories, both this function and the mini turbobrush are indicated in the specifications.
— Parquet. A function that allows you to use the nozzle for effective and gentle cleaning of parquet and other hard floor coverings. A nozzle with this function is similar to the combined one described above. However, the bristles in it are non-removable and they are designed to minimize the risk of damaging the coating. Nevertheless, the specific characteristics of such nozzles may be different. So if you have to work with delicate surfaces — the ability of such an application needs to be specified separately.
— Turbobrush. The working part of a classic turbobrush is a horizontal roller driven by airflow. This design allows you to effectively collect hair, wool and other similar debris (for example, thread). But the specific design and specialization of the turbo brush can be different. Models, where the roller is equipped with bristles, are designed mainly for fleecy surfaces like carpets. And some of these nozzles are reduced in size and are intended for cleaning upholstery furniture (in such cases, the function “for sofa” is also indicated in this list). In turn, rollers with soft short pile are great for smooth surfaces — including rather delicate ones, like parquet. Thus, there may be several turbobrushes in the kit — for different tasks.
Note that the turbobrush must be periodically cleaned from collected contaminants. In addition, such a nozzle slightly reduces the overall suction efficiency since part of the suction power is spent on rotating the roller. Electric versions are deprived of this drawback, but they also have their own disadvantages — see below for more details. Also note that even mechanical turbobrushes are quite expensive, even though their advantages over conventional fixed attachments become noticeable only when cleaning hair and long hair. Therefore, if you do not regularly have to deal with such pollution, it most likely makes sense to choose a vacuum cleaner
without a turbo brush.
— Mini turbobrush. A reduced version of the turbobrush — conventional (see above) or electric (see below). Compactness allows to effectively use such a brush in hard-to-reach places and on small surfaces. Actually, the main purpose of most mini-turbo brushes is to clean wool and hair from upholstered furniture. In addition, some of these nozzles are also well suited for cleaning carpets on narrow stairs.
— Electric turbobrush. Devices that are almost completely similar to the turbobrushes described above with the exception that the roller, in this case, is driven not by an air stream but by an electric motor installed in the nozzle itself. The main advantage of electric nozzles is the higher efficiency (with the same suction power). Firstly, such nozzles practically do not affect suction power, while traditional mechanical turbobrushes lose part of this power, spending it on rotating the roller. Secondly, the speed of rotation of the electric turbo brush does not depend on the airflow, and the torque of the electric motor can be quite high. The downside of these advantages is the complexity and high cost of the nozzles, as well as the need to use special tubes and hoses with them, supplemented by wiring to power the electric motor.
— Angle. This function means that the vacuum cleaner is equipped with a device that allows you to place the working nozzle at an angle (usually perpendicular) to the main tube. In this case, the specific design of such a device may be different. In some models, this is an additional adapter in the form of an L-shaped tube on which different nozzles are installed. In others, the L-shaped nozzle itself is made of one type or another — for example, dust (see above). Thirdly, such an adapter or nozzle is equipped with a swivel joint, which allows you to place the working part at different angles. All such devices make it much easier to clean in some hard-to-reach places.
We note that it makes little sense to use angle adapters with combined floor/carpet nozzles (see above) — such devices usually have swivel joints and do not require additional equipment to rotate them.
— Microfibre. Microfibre cloth for wet cleaning. It is worth saying that for some models with such equipment, only dry cleaning is claimed in the specification (see "Cleaning type"). But this only means that the vacuum cleaner does not have its sprayer and the microfibre must be wetted manually. In general, such a nozzle is most popular in robots. However, it is also found in upright models (mostly upright with handheld ones, see "product type"). In the first case, the microfibre is installed on the lower part of the body. In the second case, on one of the working nozzles. However, microfibre is effective in wet cleaning: it perfectly absorbs dirt and is easily washed from them. On the other hand, it makes sense to use such a nozzle (like any wet cleaning device) mainly on linoleum, parquet and other hard surfaces.
— Twister for hose. A small cyclone-type container (see "Dust collector") mounted directly on the hose of the vacuum cleaner; usually at the joint with the pipe. Most often is used in vacuum cleaners with a bag. Twister performs several useful functions at once. Firstly, it traps most of the dust and allows you to work longer without cleaning the bag; and cleaning the twister is much easier and faster than cleaning the bag. Secondly, the container on the hose is usually made transparent which makes it easier to monitor the amount of dust collected. Thirdly, it is easier to get a small but necessary item (coin, memory card, etc.) accidentally sucted by the unit from the twister. The disadvantage of such a device is that it makes the hose more bulky and heavy, reducing mobility.
— Siphon nozzle. A function that allows you to use a vacuum cleaner to clean sewage in kitchen sinks. For such cleaning, specialized nozzles are used, which are similar in shape and principle of operation to plungers. The difference is that the suction that clears a clogged pipe is created by the operation of the vacuum cleaner. All units equipped with such nozzles have the function of water suction. However, they may not be washing vacuums(see above) and may not even have the ability of wet cleaning (see “Cleaning type”).
— Flexible hose. The presence of this function is specified for vacuum cleaners that are not related to conventional ones (see "Product type") — the latter is equipped with a hose by default and there is no need to specifically mention this accessory for them. In other cases, a flexible hose can be both the main working accessory (for example, industrial vacuum cleaners, including most handheld ones) and an additional accessory (for example, upright units). In the latter case, the hose allows you to reach places that are inaccessible without such a device when cleaning.
— Adapter for tools. A function that allows the use of a vacuum cleaner in combination with various electric and sometimes pneumatic tools for cleaning production waste right in the process. It is found mainly in professional-level units — industrial (including handheld) and for workshop (household vacuum cleaners are poorly suited for working with large amounts of chips and sawdust). However, the specific design and purpose of such an adapter may be different. Most often, it has the form of a kind of cone, made up of "steps" of different diameters and is used to connect to tools that are originally equipped with nozzles for a vacuum cleaner. At the same time, the dimensions of the "steps" of the adapter correspond to several standard diameters in which nozzles are made on tools. (Some units with this equipment even have an auto-on function when the tool is turned on; see "Built-in socket" for more details). However, before buying such a unit, it's ok to clarify the compatibility of the adapter with specific tool models.
Another version of the "tool" adapter is a kind of cover that covers the area around the place of work and is used mainly with
drills and
hammers. In such a cover there are two holes: one — with a pipe for connecting a vacuum cleaner, the second — for the working nozzle of the tool. The circumference of the hole for the tool is often made of characteristic "petals", reducing the risk of damage to the drill or other nozzle in case of accidental contact with the adapter. However, such devices are rarely included in the package — they are more popular as separately sold accessories.
In addition to those described above, in modern vacuum cleaners, there are other, more specific functions of nozzles, in particular:
— Washing. Sometimes the presence of this function is specifically indicated for washing vacuum cleaners — mainly to clarify the features of the washing nozzle. So, it can be intended for different surfaces (for smooth floors or carpets/furniture), have different sizes, etc. However, the principle of construction of all such nozzles is the same: the design necessarily has a nozzle for spraying detergent, and the working part usually has the appearance of a thin and rather wide gap. This design most effectively handles with the collection of liquid.
— Ultraviolet lamp. An ultraviolet lamp, built-in in one of the main nozzles — most often in combined for floors/carpets (see above), but exceptions are possible. Such equipment allows the vacuum cleaner to carry out not only ordinary cleaning but also additional disinfection: UV radiation handles well with most pathogens. At the same time, it is harmless to people and pets if you follow the safety rules specified in the documentation for the vacuum cleaner. Of course, we are not talking about one hundred per cent disinfection. However, the use of a UV lamp anyway improves the quality of cleaning.
— Flexible crevice. A special variety of the crevice nozzles described above is with a flexible working part. This design of the nozzle allows it to penetrate even into curved slots that are inaccessible to a traditional rigid design.
— For pets. This function allows you to use the vacuum cleaner to collect hair from pets that tend to shed heavily, especially long-haired dogs and cats. A specialized nozzle for such tasks is an improved “comb”: it effectively removes loose hair, which is immediately drawn in by a vacuum cleaner. And at the same time does not create discomfort for the animal (the main thing is to accustom the pet to the noise of the vacuum cleaner itself).
— Pulverizer. A feature found in some vacuum cleaners with a wet cleaning function (see “Cleaning type”). Usually, it is implemented through a special nozzle designed exclusively for spraying liquid.
The capacity of the battery installed in the vacuum cleaner.
Recall that batteries are used in all robots, as well as other types of vacuum cleaners for which mobility is important; see "Power supply" for details. As for battery capacity, theoretically, a larger battery allows you to work longer without recharging. However, there are nuances. Firstly, the actual battery life of the unit will also depend on its type, power and some features of the functionality. Secondly, the actual battery capacity is determined not only by this indicator but also by the voltage in volts. So if these batteries differ in voltage, you need to convert their capacity into watt-hours and use this data when comparing. These calculations are described in more detail in special sources.
In light of all this, only vacuum cleaners with similar specifications can be directly compared in terms of battery capacity. And it is best to evaluate the actual battery life by the directly claimed operating time.
